AXE XCaliber  Taper Tip Graphite Iron Shafts

AXE XCaliber Taper Tip Graphite Iron Shafts


XCaliber - R Flex 36.0" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 36.5" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 37.0" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 37.5" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 38.0" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 38.5" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - R Flex 39.0" - .355 tip (75G) 3B2H
$19.99
In Stock
XCaliber - S Flex 36.0" - .355 tip (85G) 4B2H
$19.99
Backordered
XCaliber - S Flex 36.5" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 37.0" - .355 tip (85G) 4B2H
$19.99
Backordered
XCaliber - S Flex 37.5" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 38.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 38.5" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber - S Flex 39.0" - .355 tip (85G) 4B2H
$19.99
In Stock
XCaliber R Flex - .355", Taper Tip Set (39"-36") (75g) 3B2H
$139.99
In Stock
XCaliber S Flex - .355", Taper Tip Set (39"-36") - (85g) 4B2H
$139.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

AXE XCaliber Taper Tip Graphite Iron Shafts

The Arthur Xtreme Engineering XCaliber graphite iron shaft features Zone Stiffness Technology (ZST) which helps golf shots get airborne without excessive spin.

Features:
  • .355" taper tip diameter
  • Lowest balance point of any iron in the industry combined with a med/stiff lower section helps get shots airborne without excessive spin
  • At 15 cpm stiffer than the XCaliber Hybrid, easy to make a progressively stiffer set of clubs

Trimming Instructions

Arthur Xtreme Engineering Xcaliber Graphite Iron Shaft Specifications

AXE XCaliber Taper Tip Graphite Iron Shafts is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from Game Inprovement I was having Shoulder/Rotator Cup problems and the Doc. suggested that I quit golf due to the Vibration from Steel Shafts so I took out the Mizuno OE Steel and replaced with the Xcaliber 75 Gram set, no vibration and I'm hitting the ball an extra 10 yards and straighter This was a great change for mee
Date published: 2013-12-04
Rated 5 out of 5 by from Great Shafts!! I have tried them all... rifle 5.5 and 6.0; kbs S. true temper s300, I am a single digit and was skeptical of switching to lighter shafts and graphite, I am using the 85 gram stiffs. I have a med to slow tempo, smooth transition. Shafts have made me more accurate, consistent, and half a club longer. Bam flight is phenomenal, doesn't balloon and can control. Would highly recommend them.
Date published: 2016-11-13
Rated 5 out of 5 by from Nice retrofit to Mizuno irons I had been playing with light weight steel shafts in my previous iron sets (True Temper XP95 in one set, NS Pro GS95 in other), but I've always been a low ball hitter and wanted something to help with launch angle. I wanted to replace the Dynamic Gold R300s that were in my MP-54s, and these fit the bill perfectly. The kick point is not too low so the flight does not balloon, but does give me more height. I also tend to get too flat in my swing, and the lighter weight of this graphite shaft helps me swing a bit more upright. The deep, matte red finish, with minimal graphics makes for a clean, sharp look as well. There seems to be a bit more play or give (compared with steel) when I first test-fit the shafts into the hosels. However, I used a liberal pinch of shafting beads in the epoxy mixture, and the shaft fit set up quite nicely. I've played about 3 rounds (and couple driving range sessions) with these shafts, and I'm really happy with them.
Date published: 2016-05-11
Rated 5 out of 5 by from Brought life back to my Hogan's! I've been trying to find the distance I've lost in my Hogan progressive ironset w/ Apex 4 shafts over the last 4 years, and narrowed down my search for easier playing graphite to the AXE XCaliber Taper Tip .355 graphite iron set 4-PW in stiff 85g red shafts. I also own a set of UGImprovement irons with OEM graphite shafts, but the gains I experience with those are only in the soft feel area, not distance or dispersion of shot. I swapped out the very easy to play original Hogan steel shafts with the AXE XCaliber set cut 1/2" longer than the standard steel lengths and wow! 15 yards avg more distance on each iron with an even tighter controlled dispersion than the steel, but with the same flight as I was used to working with. I just ordered an AXE XCaliber Tour 6 graphite wood shaft in the same MPF as the AXE XCaliber irons to try out in my driver because I now personally see the reason for all the great reviews and want to try out more AXE XCaliber products. Hope the price continues to be so affordable on this line, I'm planning to fill some other shaft problem spots in my equipment soon!
Date published: 2015-05-19
Rated 5 out of 5 by from BETTER THAN EXPECTED Recent install in Ping G2 set provides great trajectory for here in Texas winds with reduced wear and tear than prior steel shafts.
Date published: 2016-05-05
Rated 5 out of 5 by from Improvement on OEM shaft I used this to replace a broken OEM shaft (made by UST Mamiya) on Nike iron. The customer prefers this shaft over the original.
Date published: 2016-08-18
  • y_2017, m_2, d_25, h_7
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_AS0028, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Is your longest shaft for a 3 or 4 iron?

Asked by: John M
The longest shaft is the 4 iron shaft. They do not make a 3 iron shaft in this Xcaliber shaft.
Answered by: JimY
Date published: 2017-02-20

Will these work with Ping G-Max? Ferrel needed?

Asked by: Mike
The Ping G-Max irons do take a .3 taper tip shaft, so the Xcaliber .35 taper tip iron shafts will work. Closest ferrule we would have that would work is the 65TI .500 black ferrule.
Answered by: GW2002
Date published: 2017-02-16

What ferrel would Ping I irons need?  Do they need a collared one?  They are 355 taper I think. 

Asked by: Tatorchip
This Ping ferrule (BB9047) will work and yes the Ping I irons use a collared ferrule. https://www.golfworks.com/ping-anser-i-20-355-iron-ferrules/p/BB9047/
Answered by: JimY
Date published: 2017-02-13

will this shaft work on an early 90's tommy armour 845s and do they require a ferrule?

Asked by: shawnee
Yes the Xcaliber .355" taper tip iron shaft will fit the Tommy Armour 845 irons and no they do not require a ferrule.
Answered by: JimY
Date published: 2017-01-31

Do you expect to gain any distance switching from steel to graphite

Asked by: Tatorchip
Most players gain a little distance with graphite shafts compared to steel shafts. Generally graphite iron shafts will be lighter weight then the steel shafts most players have been using. Graphite shafts can also be more flexible then steel shafts, which also benefits a lot of players. I would always tell you that if you are not sure try one of two graphite shafts first before trying the whole set to see how they work for you.
Answered by: JimY
Date published: 2017-01-30

want 4 /pw have srixon 565 irons 355tip would like them trimmed to fit with some ferules .(axecaliber graphite)don't know if irons are taper tip.

Asked by: jimmy
The Srixon 565 irons should be a .355" taper tip shaft, especially if the stock shafts are steel. We can trim these shafts for you and have the ferrules as well. You can contact our International Trade Accounts Manager, Donna Ours, at dours@golfworks.com and she can help you with your order.
Answered by: JimY
Date published: 2017-01-30

Hi, The "R Flex 36.0" shaft is on back-order right now, when will this shaft be in stock? Thanks.

Asked by: Tom
We are showing that they are due in the first of next week.
Answered by: JimY
Date published: 2016-12-15

I see these shafts must be ordered from 36-39 inches. what length does the picthing wedge start and going up to a 4 iron length

Asked by: ace3770
The 39" raw length shaft is the 4 iron shaft and they progress down in 1/2" increments to the 36" shaft for PW. The 36" shaft is used for any wedges.
Answered by: JimY
Date published: 2016-12-06
  • y_2017, m_2, d_25, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_37
  • loc_en_US, sid_AS0028, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks