Brampton Technology HF100 Grip Solvent

Brampton Technology HF100 Grip Solvent


4 oz. HF100 Pump Spray Grip Solvent
$2.99
In Stock
8 oz. HF100 Pump Spray Grip Solvent
$3.99
In Stock
Quart HF100 Grip Solvent
$8.99
In Stock
Gallon HF100 Grip Solvent
$20.99
In Stock
Quart HF100 Solvent w/ Spray Nozzle Kit
$9.99
In Stock
Spray Nozzle for Quart Bottle
$1.99
In Stock

Brampton Technology HF100 Grip Solvent

Nontoxic, nonflammable and odorless solvent that is reusable. HF 100 solvent is more effective than other solvents, working well with up to 60% less.

Note: Due to weight, gallon sizes require additional shipping charges.

Brampton Technology HF100 Grip Solvent is rated 4.7 out of 5 by 14.
Rated 5 out of 5 by from The Best Previously used Golfsmith solvent, and after their demise used solvents from the local hardware store with mixed results. With my last tin of solvent, I damaged a couple of grips getting them slipped on, and it wasn't for lack of solvent. I've had very good luck with Brampton epoxy and so I tried their HF100 Grip Solvent. Better than the old Golfsmith product and far better than any of the hardware store alternatives. The grips darn near slide on by themselves, and not a lot of the solvent goes a long way ( the Brampton instructions are on target ). You cannot possible mess up a grip replacement with this solvent.
Date published: 2017-08-08
Rated 5 out of 5 by from Best Ever I don't know how you could poorly rate this product. Why is the guy pouring it all over the floor? Use a pan man! Just compare the fact that normal solvent poses major health threats, read the can and this stuff is non-toxic. Enough said. More costly but wont kill you! Kind of a no brainer???
Date published: 2013-11-02
Rated 5 out of 5 by from Best Grip Solvent Ever This stuff is super easy to work with. I won't use anything else. The 1 star reviewer must have a few screws loose. Very comical.
Date published: 2014-06-09
Rated 5 out of 5 by from Best Ever I don't know how you could poorly rate this product. Why is the guy pouring it all over the floor? Use a pan man! Just compare the fact that normal solvent poses major health threats, read the can and this stuff is non-toxic. Enough said. More costly but wont kill you! Kind of a no brainer???
Date published: 2013-11-02
Rated 5 out of 5 by from Grip solvent Great product, I will use this product from now on.
Date published: 2017-02-28
Rated 1 out of 5 by from This is the worst solvent ever. This stuff is so soapy and slippery it should be banned for safety reasons. It turns everything into a slippery soapy mess. You will have to clean everything with a spirits anyway to get the soap off. It is really dangerous when it get's on the floor. You should not even sell it.
Date published: 2013-07-02
Rated 5 out of 5 by from Great Product! I have used this product in the past and will continue to do so. Without the strong solvent smell of other products, I can regrip clubs in my basement during the winter with my wife's blessing. A real plus!
Date published: 2017-04-05
Rated 5 out of 5 by from Works Great This is by far the best stuff I've worked with to date. I grip my clubs in my apartment and use a pizza box to catch any drips. No smell! No fuss! Just spray in the grip and on the tape. Highly recommended!
Date published: 2013-10-22
  • y_2017, m_10, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_14
  • loc_en_US, sid_HF100, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What is the difference between the other solvent you carry?

Asked by: Mark007
The HF100 Brampton and VB1018 GolfWorks FP142+ solvents are similar in that they are both non-flammable and non toxic. I refer to these as user friendly solvents. The GolfWorks Grip Solvents (SOMQT) is flammable. It is a Mineral Spirits based solvent. All three work very well but the SOMQT solvent will set up a little faster then the other two.
Answered by: JimY
Date published: 2017-03-27

How much grip solvent do i need for complete set of clubs?

Asked by: PFG
The 8 oz. bottle would be enough to do a completer set. You can catch the solvent to recycle and reuse it as well.
Answered by: JimY
Date published: 2017-03-20

what is the shipping cost

Asked by: vic
Without knowing where you are it would be best for you to contact our Customer Service Department at 1-800-848-8358 and they can help you.
Answered by: JimY
Date published: 2017-02-20

Do you have a safety data sheet for the 4oz Brampton HF-100 spray non toxic grip solution? Can you please email me a copy.

Asked by: Stacie
We show you also contacted customer service about the SDS sheet, your request is being processed
Answered by: Pat
Date published: 2017-02-02

Msds report?

Asked by: Michael
Please send an email to our Customer Service Department at golfworks@golfworks.com. They can email you a copy of the MSDS or SDS sheet as they are now called.
Answered by: JimY
Date published: 2017-01-20

Does the solvent build up on the spring and ball bearing to make it stick. The solvent I use tends to gum up. I have to take it apart and loosen the ball before I use it.

Asked by: alarmnu
I have been using the Brampton solvent in the Grip Shooter we have in the school for a number of years now and I have had much better success with it not gumming up the spring and ball bearing. It may still happen but not nearly as often.
Answered by: JimY
Date published: 2016-11-29

Hello , I have tape at home as I use and I just use water nothing else, do you have that tape? I have ordered it before at GolfWorks.!

Asked by: Lasse
Yes we have the Water Activated Grip Tape. You will find it at this link. http://www.golfworks.com/product.asp?pn=WST10
Answered by: JimY
Date published: 2016-02-29

I'm using a rubber floor mat on a wood floor that constantly shifts. Back side of mat is solid & flat like the floor. Do you think cleaning these contact surfaces with your HF100 Grip Solvent is my solution or should I go a different direction. 

Asked by: KenCan
I do not consider the HF100 solvent to be a good cleaning solvent. In house we use Naptha for both a gripping solvent and cleaning solvent when doing club assembly. I would think Naptha would be a better cleaning solvent for the back of your mat and because it evaporates fairly quickly I would think it should not hurt your wood floor. You might try using a little double sided grip tape on the back of the mat to hold it in place.
Answered by: JimY
Date published: 2017-06-09
  • y_2017, m_10, d_17, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_HF100, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks