Brampton Technology HF100 Grip Solvent

Brampton Technology HF100 Grip Solvent


4 oz. HF100 Pump Spray Grip Solvent
$2.99
In Stock
8 oz. HF100 Pump Spray Grip Solvent
$3.99
In Stock
Quart HF100 Grip Solvent
$8.99
In Stock
Gallon HF100 Grip Solvent
$20.99
In Stock
Quart HF100 Solvent w/ Spray Nozzle Kit
$9.99
In Stock
Spray Nozzle for Quart Bottle
$1.99
In Stock

Brampton Technology HF100 Grip Solvent

Nontoxic, nonflammable and odorless solvent that is reusable. HF 100 solvent is more effective than other solvents, working well with up to 60% less.

Note: Due to weight, gallon sizes require additional shipping charges.

Brampton Technology HF100 Grip Solvent is rated 4.7 out of 5 by 12.
Rated 5 out of 5 by from Best Ever I don't know how you could poorly rate this product. Why is the guy pouring it all over the floor? Use a pan man! Just compare the fact that normal solvent poses major health threats, read the can and this stuff is non-toxic. Enough said. More costly but wont kill you! Kind of a no brainer???
Date published: 2013-11-02
Rated 5 out of 5 by from Best Grip Solvent Ever This stuff is super easy to work with. I won't use anything else. The 1 star reviewer must have a few screws loose. Very comical.
Date published: 2014-06-09
Rated 5 out of 5 by from Best Ever I don't know how you could poorly rate this product. Why is the guy pouring it all over the floor? Use a pan man! Just compare the fact that normal solvent poses major health threats, read the can and this stuff is non-toxic. Enough said. More costly but wont kill you! Kind of a no brainer???
Date published: 2013-11-02
Rated 1 out of 5 by from This is the worst solvent ever. This stuff is so soapy and slippery it should be banned for safety reasons. It turns everything into a slippery soapy mess. You will have to clean everything with a spirits anyway to get the soap off. It is really dangerous when it get's on the floor. You should not even sell it.
Date published: 2013-07-02
Rated 5 out of 5 by from Great Product! I have used this product in the past and will continue to do so. Without the strong solvent smell of other products, I can regrip clubs in my basement during the winter with my wife's blessing. A real plus!
Date published: 2017-04-05
Rated 5 out of 5 by from Works Great This is by far the best stuff I've worked with to date. I grip my clubs in my apartment and use a pizza box to catch any drips. No smell! No fuss! Just spray in the grip and on the tape. Highly recommended!
Date published: 2013-10-22
Rated 5 out of 5 by from Works Great This is by far the best stuff I've worked with to date. I grip my clubs in my apartment and use a pizza box to catch any drips. No smell! No fuss! Just spray in the grip and on the tape. Highly recommended!
Date published: 2013-10-22
Rated 5 out of 5 by from slick product Best solvent I have used. The spray bottle works great and saves on solvent. The solvent works great, grips slide right on. No toxic smells.
Date published: 2016-05-27
  • y_2017, m_5, d_22, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_HF100, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What is the difference between the other solvent you carry?

Asked by: Mark007
The HF100 Brampton and VB1018 GolfWorks FP142+ solvents are similar in that they are both non-flammable and non toxic. I refer to these as user friendly solvents. The GolfWorks Grip Solvents (SOMQT) is flammable. It is a Mineral Spirits based solvent. All three work very well but the SOMQT solvent will set up a little faster then the other two.
Answered by: JimY
Date published: 2017-03-27

How much grip solvent do i need for complete set of clubs?

Asked by: PFG
The 8 oz. bottle would be enough to do a completer set. You can catch the solvent to recycle and reuse it as well.
Answered by: JimY
Date published: 2017-03-20

what is the shipping cost

Asked by: vic
Without knowing where you are it would be best for you to contact our Customer Service Department at 1-800-848-8358 and they can help you.
Answered by: JimY
Date published: 2017-02-20

Do you have a safety data sheet for the 4oz Brampton HF-100 spray non toxic grip solution? Can you please email me a copy.

Asked by: Stacie
We show you also contacted customer service about the SDS sheet, your request is being processed
Answered by: Pat
Date published: 2017-02-02

Msds report?

Asked by: Michael
Please send an email to our Customer Service Department at golfworks@golfworks.com. They can email you a copy of the MSDS or SDS sheet as they are now called.
Answered by: JimY
Date published: 2017-01-20

Does the solvent build up on the spring and ball bearing to make it stick. The solvent I use tends to gum up. I have to take it apart and loosen the ball before I use it.

Asked by: alarmnu
I have been using the Brampton solvent in the Grip Shooter we have in the school for a number of years now and I have had much better success with it not gumming up the spring and ball bearing. It may still happen but not nearly as often.
Answered by: JimY
Date published: 2016-11-29

Hello , I have tape at home as I use and I just use water nothing else, do you have that tape? I have ordered it before at GolfWorks.!

Asked by: Lasse
Yes we have the Water Activated Grip Tape. You will find it at this link. http://www.golfworks.com/product.asp?pn=WST10
Answered by: JimY
Date published: 2016-02-29

I'm using a rubber floor mat on a wood floor that constantly shifts. Back side of mat is solid & flat like the floor. Do you think cleaning these contact surfaces with your HF100 Grip Solvent is my solution or should I go a different direction. 

Asked by: KenCan
I do not consider the HF100 solvent to be a good cleaning solvent. In house we use Naptha for both a gripping solvent and cleaning solvent when doing club assembly. I would think Naptha would be a better cleaning solvent for the back of your mat and because it evaporates fairly quickly I would think it should not hurt your wood floor. You might try using a little double sided grip tape on the back of the mat to hold it in place.
Answered by: JimY
Date published: 2017-01-27
  • y_2017, m_5, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_HF100, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks