Brass Shims - Tapered .355" to .370"

Brass Shims - Tapered .355" to .370"


T (.355 - .370) - 5 pack
$3.99
In Stock

Brass Shims - Tapered .355" to .370"

The SHIMT brass shims allow any .355" taper tipped iron shaft to be installed into any iron head with a .370" parallel hosel bore.

Brass Shims - Tapered .355" to .370" is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Need a shim I don't know why I needed shims for .355 shafts in a set of Calloway x22 tour irons but testing the fit made it necessary to add shims. They fit fine now.
Date published: 2015-10-02
Rated 5 out of 5 by from The perfect solution! These shims are the perfect solution for shafting .370 parallel bore irons or hybrids with .355 taper tip shafts. They provide a snug and secure fit. I've built many clubs using these shims and have never once had a failure. If you're like me and prefer the feel of constant weight taper tip versions of iron shafts, then these are what you need when your heads require parallel tip shafts. They just simply work, enough said.
Date published: 2017-10-21
Rated 5 out of 5 by from Great shims I bought these to install new PX LZ shafts in my M1 Irons. Can't get the shafts in anything other than 355 taper so these were needed and worked perfectly.
Date published: 2017-08-23
Rated 5 out of 5 by from Golfworks stuff actuall works. Been purchasing from Golfworks for many years. Always good selection of tools and supplies for the small golf club repair shop.
Date published: 2016-03-01
Rated 5 out of 5 by from shims .355 - .370 Good communication, great product, fitted perfectly exactly what they said I needed. Thank you Golfworks for your help....
Date published: 2016-04-09
  • y_2017, m_11, d_19, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_SHIMT, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have ping eye3 oversize what size brass shim will I need? I do have some space and need them.

Asked by: Peter Malone
All Ping irons us .355" taper tip shafts. I do know that the hosel bore with the Eye 3 irons was large and you could put a .370" shaft into these irons. With that in mind if you are installing .355" taper tip shafts you would use the SHIMT that is marked .355 - .370.
Answered by: JimY
Date published: 2017-10-21
  • y_2017, m_11, d_19, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_1
  • loc_en_US, sid_SHIMT, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks