Bushing Sleeve with Ferrule

Bushing Sleeve with Ferrule

.350 Bushing Hosel Ferrules 4 pk.
In Stock

We Also Recommend

Bushing Sleeve with Ferrule

Plastic sleeve with attached ferrule for inserting a .335" wood shaft into a .350" bore. (4 per pack)
Bushing Sleeve with Ferrule is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from those bushing sleeve work great. those bushing work great, used them on my fairway woods.
Date published: 2015-08-09
  • y_2018, m_1, d_20, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_LE9002, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will the sleeve work (or others you may suggest) on 2017 M2 fairway wood to insert a .335 diameter shaft? Current stock REAX shaft is listed at diameter of .355.

Asked by: Ray
The information I have says Taylor Made is using a .335" tip size shaft in the 2017 M2 fairway woods and you would not need a shim. Just a collared ferrule like the BB0006.
Answered by: JimY
Date published: 2017-10-09

Looking to install a .335 tipped shaft into a .350 shaft adapter for a Taylorade SLDR driver head. #1, will this work? #2, will this be a secure connection? Thank you.

Asked by: Mark60
Yes you can use the LE9002 adaptor to install a .335" shaft into the .350" shaft adaptor. I would very lightly sand the outside and inside of the adaptor before installation.
Answered by: JimY
Date published: 2017-08-04

Looking to put .335 iron shafts in .370 heads. Will this bushing allow me to do it?

Asked by: Matt
No, the LE9002 is to size a .335" size shaft into a .350" hosel bore. It will not work with a .370" hosel bore size. You can use the SMIM30 (.370" - .400") and that will take you from .335" to .365". I have use this shim for installing a .335" shaft into a .370" hosel bore before and it will work. I like to use some Quik Center (QCSB) mixed with the epoxy to keep the shaft centered in the bore. https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/ https://www.golfworks.com/the-golfworks-quick-center-shafting-beads/p/QCSB/
Answered by: JimY
Date published: 2017-07-31

How long is the sleeve

Asked by: Rmw
The LE9002 is .875" (7/8") long from top to bottom.
Answered by: GW2002
Date published: 2017-04-07

What time of Ferrule do I need for a odyssey 2 ball white hot putter. The putter I have now is a bit loose and I need to remove and reinstall the putter head on original putter. Regards Louis

Asked by: Man On Fire
The Odyssey 2 ball putter just uses a trim ring for a ferrule. You could use the 59PI or the O-ring 68WIR as a replacement. If the shaft fit loose we would use Quik Center (QCSB) mixed with the epoxy to tighten the fit and keep the shaft centered in the bore.
Answered by: JimY
Date published: 2016-06-20

Will  this bushing sleeve with ferrule work to fit a .335 Aldila shaft into a Ping .350 G10 Driver?

Asked by: Miggie Mo
The LE9002 bushing shim will work for the .335 Aldila shaft installed in the Ping .350 G10 driver.
Answered by: GW2002
Date published: 2015-02-02
  • y_2018, m_1, d_20, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_LE9002, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks