Callaway .335" Shaft Adaptor

Callaway .335" Shaft Adaptor

Callaway .335" - Shaft Adaptor
In Stock

Callaway .335" Shaft Adaptor

Adaptor for reshafting Callaway FT-5, FT-I, X-460, Big Bertha 460, Big Bertha 454, VFT, ERC II, Steel Head III and Great Big Bertha II Woods. For .335" Shaft Tip Diameters.
Callaway .335" Shaft Adaptor is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from Met expectations I got two shaft adapters. They were for a .335 shaft mine were .350. I drilled them out and they worked great. I will know better next time and get .350 but hey these worked fine.
Date published: 2016-04-15
Rated 5 out of 5 by from Adapter allowed me to use a 350 tip shaft Older Callaway woods take 335 tip shafts, ever harder to find. This opens other outcomes.
Date published: 2017-03-22
  • y_2018, m_1, d_19, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_BB9002, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

will this work in razr edge driver .335 tip?

Asked by: way1
The BB9002 was designed to convert .350 Callaway bore hosels to accept .335 tip shafts. Callaway had multiple models that used both, so can't know for sure if this will work in the Razr Edge Driver. If it is a .350 hosel diameter and you are wanting to put a .335 shaft in it, then the BB9002 should work.
Answered by: GW2002
Date published: 2018-01-16

Putting a .335 shaft into a callaway apex hybrid .370 hosel will this work as a shim? Is there any dimensions available?

Asked by: Jim
No the BB9002 will not work with the Apex Hybrid. The BB9002 shims a .335" shaft into a .350" hosel bore and only on certain Callaway models. I have shimmed .335" tip size shafts into a .370" hosel bore using the SHIM30 (.370 - .400). It adds .030" and you need .035". I also used some Quik Center (QCSB) mixed with the epoxy to keep the shaft and shim centered in the hosel bore. A ferrule like the BB0005 should work. You could also use the SADW Bushing Ferrule Adaptor and carefully sand the outside diameter down from .400" to .370". This adaptor will allow you to install the .335" tip size shaft into the .370" hosel bore and the ferrule is attached.
Answered by: JimY
Date published: 2018-01-08

Would this work on the XR 2015 driver

Asked by: Ewen26
No the BB9002 will not work for the Callaway XR driver. The Callaway XR driver uses the CA0020 shaft adaptor and if you need the replacement ferrule for the CA0020 you will need the BB9096 Opti-Fit ferrule.
Answered by: JimY
Date published: 2017-10-30

What shaft tip diameter does the Callaway Big Bertha 454 driver take?

Asked by: Dave
The Big Bertha 454 driver used a .350" tip size shaft. To install a .335" tip size shaft you need to use the BB9008 adaptor.
Answered by: JimY
Date published: 2017-08-22

Does this adapter fit The Razr Hawk tour driver? 

Asked by: William
Yes if you are wanting to install a .335" tip size shaft the BB9002 adaptor is the one you need for the RAZR Hawk Tour driver.
Answered by: JimY
Date published: 2017-08-08

Do you know if this is what is needed to install a shaft in the newly released Steelhead XR Fairwaywood?

Asked by: CB1301
No, for the Steelhead XR Fairway wood you would use the BB0006 collared ferrule.
Answered by: JimY
Date published: 2017-07-21

Will this work for Hyper X Tour driver?  Thx!

Asked by: JB1
Yes the BB9002 adaptor will work with the Callaway Hyper X Tour Driver.
Answered by: JimY
Date published: 2017-06-12

Is the .335" Calloway shaft adapter for a Steel Head III available?  I see in your inventory that it is backordered.

Asked by: rsbarbhardt
We are showing that the BB9002 is due in any day. Hopefully we will have them ready to ship by the end of this week.
Answered by: JimY
Date published: 2017-05-22
  • y_2018, m_1, d_19, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_en_US, sid_BB9002, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks