Callaway Collared .355" Ferrule

Callaway Collared .355" Ferrule

Callaway Collared .355" Ferrule -
In Stock

Callaway Collared .355" Ferrule

Collared .355" tapered ferrule to fit modern Callaway irons and wedges. The Callaway .355" ferrule fits the following models

  • X Prototype Irons
  • Razr X Muscleback Irons
  • Razr X Tour Irons
  • X Forged Irons
  • X Series JAWS Wedges
  • X Series JAWS CC Wedges
  • Razr X Forged Wedges
  • CC Forged Wedges
Callaway Collared .355" Ferrule is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Perfect Very happy . They do a wonderful job I'll be back to order some more soon
Date published: 2017-04-15
  • y_2017, m_10, d_16, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_BB9051, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Would this ferrule fit apex 16 pro irons, if I bored out the hosel to accept a .370" parallel tipped shaft?

Asked by: Robj
Yes these should fit the Apex 16 Pro irons even if they are not bored out to a .370" size. .355" taper tip shafts have tapered out to approximately .370" where the shaft exits the top of the hosel so .370" ferrules can be used.
Answered by: JimY
Date published: 2017-09-11

Hi I have a set of Callaway Xr pro irons.  I have the kbs tour 90 shaft.  Do they take .370 parallel or .355 taper is these irons

Asked by: Bob
The Callaway XR Pro irons use a .370" parallel tip size shaft.
Answered by: JimY
Date published: 2017-07-13

What ferrule works with the 2013 Apex irons with the XP95 .355 shafts?

Asked by: vertreper
The BB9051 ferrule will work well with the Apex irons.
Answered by: JimY
Date published: 2017-06-12

Which ferrule fits the callaway XR pro irons? The .355 or .370?

Asked by: Mitch
The Callaway XR Pro Irons use a .370" tip size shaft so you would need the BB9050.
Answered by: JimY
Date published: 2017-05-24


Asked by: seamus
Yes the BB9051 .355" ferrule is for .355" taper tip shafts.
Answered by: JimY
Date published: 2017-02-23

Will these fit my Mac Daddy MD3 Callaway wedges?

Asked by: Lbcruzn1
Yes the Callaway BB9051 collared ferrule will work with the Mac Daddy MD3 wedges.
Answered by: JimY
Date published: 2017-02-13

Would these fit ping s56 irons

Asked by: Nagra
I do not know if the Callaway ferrules will fit the Ping S56 irons but the Ping BB9047 Ping ferrule should work just fine.
Answered by: JimY
Date published: 2017-02-06

What type of ferrule is needed for an FTi 3 wood?

Asked by: Pir8
For the FTi 3 wood if you are installing a .335" tip diameter shaft you will need the BB9002 adapter and if you are installing a .350" tip diameter shaft, which was the stock size shaft in the FTi 3 wood, you will need the CSS adapter listed for the .350" size.
Answered by: JimY
Date published: 2016-12-19
  • y_2017, m_10, d_16, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_18
  • loc_en_US, sid_BB9051, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks