Callaway Hosel Adaptor

Callaway Hosel Adaptor

Callaway Driver Adaptor .335"
In Stock
Callaway Driver Adaptor .350"
In Stock

Callaway Hosel Adaptor

Replacement adaptor with an oversized .630" OD specifically designed to fit all Callaway Razr Hawk, Diablo Edge, Octane, Octane Tour and FT-iz Driver Heads. Available in both .335" and .350".

Callaway Hosel Adaptor is rated 1.0 out of 5 by 1.
Rated 1 out of 5 by from not the Correct one I purchased this hosel adaptor to reshaft a Diablo Edge Tour Driver. It is not the correct one. I've purchased several different ferrules and hosel adaptors but, none have fit. I tried contacting Callaway Customer Service directly BUT, they took several weeks to reply and only directed me to call their service center for reshafting options. I don't want to spend 200.00 or more to reshaft a driver that I can do myself for less than 75.00. Apparently they're afraid of the liability.
Date published: 2016-09-20
  • y_2017, m_6, d_17, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_BB9025, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have a Callaway FTiz driver head. Is this the right hosel adapter? I know I need to purchase the correct one for the tip size of the shaft I buy.

Asked by: Steve
Yes this is the correct adaptor for the FTiz driver. If you are installing a .335" tip size shaft then order the one listed for .335"..
Answered by: JimY
Date published: 2017-02-21

I have a rh razr hawk i-mix draw driver will this adapter work on this head?

Asked by: dick
Yes this ferrule will work with the I-mix adaptor. If you are installing a .335" shaft order the .335" size ferrule.
Answered by: JimY
Date published: 2016-09-20

I have Callaway Diablo Edge and Big Bertha Diablo driver heads. Which adaptors do I need?

Asked by: Chukarjohn
I have a Diablo Edge Tour. I bought the BB9025 in .335 and it doesn't even come close to fitting. I ordered a .350 shaft and will figure out the correct ferrule to use. Don't try to contact Callaway Customer Service for information either. They will ignore you completely. 
Answered by: BA in KC
Date published: 2016-09-06

I want to reshaft a Callaway X fairway wood with a .335 shaft that was removed from a Cobra Baffler fairway wood. Which adapter insert would I need to do the reshafting?

Asked by: Ron B
You would need the BB9002 adapter for this installation.
Answered by: JimY
Date published: 2016-07-01

Which adapter do I need for a Callaway Warbird driver?

Asked by: gkp22
The Callaway Warbird metalwoods used the BB9003 adapter.
Answered by: JimY
Date published: 2017-04-16

Will this work on the FT IQ Driver?

Asked by: Kgann
For the IQ if you are using a .350" tip size shaft you would want the CSS and for a .335" tip size shaft you would want the BB9002.
Answered by: JimY
Date published: 2016-05-26

What ferrule do I need for a Callaway Hyper X Driver?

Asked by: Carl
The CSS Callaway adaptor ferrule appears to the correct ferrule for the Hyper X. We list the CSS for the X-460 Driver and from images we have it appears to be the correct one.
Answered by: GW2002
Date published: 2016-04-27

Hi, I have a Callaway FT 4 wood which has a .350 tip.I would like to change the shaft and put in a .335 Aldila NVS shaft.Can I use this Callaway Hosel adapter (.335) and simply re-shaft the club?

Asked by: RASPAT
If this is the FT 4 wood that you have we do not have a Callaway ferrule for this club. You will need to use either a brass shim (SHIM 15) or a Universal Plastic Shim to install a .335" shaft into the .350" hosel bore.
Answered by: JimY
Date published: 2016-03-28
  • y_2017, m_6, d_17, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_BB9025, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks