Callaway I-Mix Adaptor Kit

Callaway I-Mix Adaptor Kit

Callaway I-Mix Adaptor Kit

Callaway I-Mix Adaptor Kit

Threaded metal sleeve allows a permanent and easy solution for reshafting the Callaway I-Mix drivers. Kit Includes; threaded aluminum replacement sleeve along with a .335" and .350" shaft adaptor.

Callaway I-Mix Adaptor Kit is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from Hard to find part The adapter I ordered was not available in my area. Prompt service. Exellent quality.
Date published: 2016-08-05
Rated 5 out of 5 by from Great adaptor Easy set up for an awesome head !!! Makes an excelant driver for little money.
Date published: 2016-08-09
Rated 5 out of 5 by from Worke to a charm! Was able to reshaft my clubhead and am so happy with the results.
Date published: 2015-09-01
Rated 5 out of 5 by from Worked perfectly Great product to keep a favored club going thanks .
Date published: 2016-07-03
  • y_2017, m_2, d_25, h_6
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_BB9040, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Is this adaptor still available?

Asked by: Egay
Yes we have them in stock.
Answered by: JimY
Date published: 2017-02-06

Are you going to have the I mix adapters again. I have a Fit IZ that I would like to reshaft

Asked by: Silver cobra
We have them in stock now and I do not see anything that says that they are being discontinued.
Answered by: JimY
Date published: 2017-01-04

How do you tighten the shaft after the adaptor is installed?

Asked by: Coltie2
The shaft gets epoxied into the adaptor.
Answered by: JimY
Date published: 2017-01-04

I think this has been covered but I want to make sure I understand correctly. I have a FT 9 imix that has a .350 hosel. The shaft I have is a .335 tip diameter. This is the kit I need for them to fit together? 

Asked by: Divot Dave
Yes this kit will work or if you are using the existing Imix adapter you could use the BB9002 which is the ferrule adapter pictured to the left of the aluminum sleeve in the picture.
Answered by: JimY
Date published: 2016-11-28

Is this product new or used?

Asked by: Jason
These are new.
Answered by: JimY
Date published: 2016-10-13

Is there a special wrench that comes with this kit? I was told I would need the wrench that fits the adaptor

Asked by: Kevin W
There is no wrench required for the I Fit adaptor. It gets epoxied into the clubhead and you can just thread it into the clubhead. Here is a link to the instructions.
Answered by: JimY
Date published: 2016-07-25

Will this adapter fit my Callaway FT IQ I-Mix head with a .350 shaft tip?

Asked by: Woody
The Aluminum adaptor will fit the clubhead and then you use the black plastic adaptor pictured on the right for a .350" tip diameter shaft. The black adaptors are included.
Answered by: JimY
Date published: 2016-07-08

Maybe I didn't ask the right question re my i-mix FT 9. Sorry! Can the current shaft be separated from the head; the imix hosel removed from the Kyoshi and a new hosel fitting put on the shaft (either to fit a Callaway 816 or a Titleist 915 D3). 

Asked by: John
Callaway tells me that all the shafts used with the Imix adapter were a .350" tip diameter. We do not stock a shaft adapter for either the Titleist or Callaway that will accept a .350" tip diameter shaft. There is a chance that we can special order an aftermarket adapter for either or both of these drivers that will accept the .350" tip size shaft and allow you to install the shaft into either of these drivers. You would need to contact our customer service department at or by calling 1-800-848-8358 can they will help you.
Answered by: JimY
Date published: 2016-06-08
  • y_2017, m_2, d_25, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_en_US, sid_BB9040, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks