Callaway I-Mix Adaptor Kit

Callaway I-Mix Adaptor Kit

Callaway I-Mix Adaptor Kit
In Stock

Callaway I-Mix Adaptor Kit

Threaded metal sleeve allows a permanent and easy solution for reshafting the Callaway I-Mix drivers. Kit Includes; threaded aluminum replacement sleeve along with a .335" and .350" shaft adaptor.

Callaway I-Mix Adaptor Kit is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from Hard to find part The adapter I ordered was not available in my area. Prompt service. Exellent quality.
Date published: 2016-08-05
Rated 5 out of 5 by from Great adaptor Easy set up for an awesome head !!! Makes an excelant driver for little money.
Date published: 2016-08-09
Rated 5 out of 5 by from Worke to a charm! Was able to reshaft my clubhead and am so happy with the results.
Date published: 2015-09-01
Rated 5 out of 5 by from Worked perfectly Great product to keep a favored club going thanks .
Date published: 2016-07-03
  • y_2017, m_5, d_25, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_BB9040, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Hi, I have a replacement head - Callaway Diablo Octane 10.5 with a threaded shaft connection. The shaft is a Callaway I-Mix. Would the I-Mix adapter kit work? and how do I tighten the adapter before gluing the I-Mix shaft to the adapter. Thank you, CMK

Asked by: CharlesMK
I would install the shaft into the I-Mix adaptor first then you can use the shaft and grip to thread the adaptor into the clubhead.
Answered by: JimY
Date published: 2017-05-04

I have a Callaway X 4 hybrid. The head was coming off so I disassembled it. In the process I destroyed what I would call an adaptor ferrule. On this club, the shaft goes through the head and needs an adaptor at the top. Can I buy this ferrule with adaptor

Asked by: Ssalmans
You would need the Callaway CSS adaptor for the .350" size for the X Hybrid. You can order from this link.
Answered by: JimY
Date published: 2017-04-24

I currently have a Callaway FT-5 with the Fujikura 150 shaft. I would like to reuse the shaft for an FT-9 iMix head. Would I need the .350 or .335 adapter om this shaft?

Asked by: FarmerJohn
The Callaway FT-5 used a .350" tip size shaft so you would need the .350" size adaptor for the IMix.
Answered by: JimY
Date published: 2017-04-12

Is this adaptor still available?

Asked by: Egay
Yes we have them in stock.
Answered by: JimY
Date published: 2017-02-06

Are you going to have the I mix adapters again. I have a Fit IZ that I would like to reshaft

Asked by: Silver cobra
We have them in stock now and I do not see anything that says that they are being discontinued.
Answered by: JimY
Date published: 2017-01-04

How do you tighten the shaft after the adaptor is installed?

Asked by: Coltie2
The shaft gets epoxied into the adaptor.
Answered by: JimY
Date published: 2017-01-04

I think this has been covered but I want to make sure I understand correctly. I have a FT 9 imix that has a .350 hosel. The shaft I have is a .335 tip diameter. This is the kit I need for them to fit together? 

Asked by: Divot Dave
Yes this kit will work or if you are using the existing Imix adapter you could use the BB9002 which is the ferrule adapter pictured to the left of the aluminum sleeve in the picture.
Answered by: JimY
Date published: 2016-11-28

Is this product new or used?

Asked by: Jason
These are new.
Answered by: JimY
Date published: 2016-10-13
  • y_2017, m_5, d_25, h_7CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_BB9040, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks