Callaway Razr Hawk, FT-iz and Diablo Fairway/Hybrid Adaptor

Callaway Razr Hawk, FT-iz and Diablo Fairway/Hybrid Adaptor


Razr Haek, FT-iz and Diablo FWY Adaptor - .335"
$3.75
In Stock
Razr Hawk, FT-iz and Diablo FWY Adaptor - .350"
$3.75
In Stock
FT-iz and Diablo Hybrid Adaptor - .370"
$3.75
In Stock

Callaway Razr Hawk, FT-iz and Diablo Fairway/Hybrid Adaptor

Replacement adaptor with an oversized OD specifically designed to fit all Callaway Razor Hawk, FT-iz and Big Bertha Diablo fairway woods. Available in .335" and .350" for fairway woods and .370" for hybrids.

Callaway Razr Hawk, FT-iz and Diablo Fairway/Hybrid Adaptor is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Reshaft 2006 Callaway X hybrid This is a perfect fit for Callaway X. The straight sided portion is 0.43" (or very close to that) so measure the I.D. of the hosel of the head you are reshafting. It was easy to repair my friends club with this adapter. I used the 0.335 version since I had a shaft of that size. Perfect.
Date published: 2016-10-20
  • y_2017, m_10, d_18, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_BB9026, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I have a Diablo fairway head that has what must be a .370 hosel opening (very Large). I have a shaft with a standard tip .355. Is this the adaptor I need?

Asked by: Wayne
If you are installing a standard .335" tip size wood shaft then use this is the adaptor you need for the .335" size.
Answered by: JimY
Date published: 2017-08-21

I'm re-shafting my Callaway Xhot 3 hybrid, would I use this adaptor or another ferrel?

Asked by: danimal48
The BB9050 collared Callaway ferrule would work for the Xhot hybrid. https://www.golfworks.com/ping-anser-i-20-355-iron-ferrules/p/BB9047/
Answered by: JimY
Date published: 2017-07-24

Hi When will the adapters be re- stocked?

Asked by: Marty
We are backordered on the .350" adaptor here in the US and are expecting them in the week of July 17th. We ship to GolfWorks Canada on a regular basis. It would be best for you to contact GolfWorks Canada and they can tell you when they expect to have them in stock. https://www.golfworks.ca/contact-us/a/222/
Answered by: JimY
Date published: 2017-07-07

what adapter fits the Big Bertha C4 Driver head

Asked by: RJS
We do not stock an adaptor to fit the Big Bertha C4 driver. We may be able to special order the sleeve adaptor for the C4. The C4 used a .400" tip diameter shaft. You would need to call Customer Service at 1-800-848-8358.
Answered by: JimY
Date published: 2017-06-05

I have a Ftiz driver head, is this the right adaptor for it, would need to fit a shaft into it after

Asked by: pgc1
This is the adaptor for the Ft-iz driver. If you are installing a .335" tip diameter make sure to order the one listed for .335".
Answered by: JimY
Date published: 2017-02-20

When I look at this page the containing these ferrules the choice options and ordering options disappear. Am I doing something wrong?

Asked by: KAC
If you have changed your ship to to show Sweden it is currently not set up for this particular problem. We will get that fixed right away so that you can order. We still have some bugs to work out with this new Ship To: ordering site. If you need to you can contact our International Trade Accounts Manager, Donna Ours, at dours@golfworks.com
Answered by: JimY
Date published: 2017-02-08

What is the outside diameter of the parallel portion? I am trying to re-shaft an X hybrid circa 2006. The through hole is 0.350" and the large bore portion of the hosel is 0.43"

Asked by: Oculos
With the Callaway bore through X hybrid if you are installing a .335" tip diameter shaft you will need the BB9002 adapter and if you are installing a .350" tip diameter shaft you will need the CSS adapter. These are the correct adapters for the X Hybrid. http://www.golfworks.com/callaway-335-shaft-adaptor/p/BB9002/ http://www.golfworks.com/callaway-350-shaft-adaptor/p/CSS/
Answered by: JimY
Date published: 2016-09-29

Will this adapter fit a Callaway FT-iQ driver?

Asked by: Stevekc
For the Callaway FT-iQ driver if you are installing a .335" tip size shaft you would use the BB9002 adapter and if you are installing a .350" tip size shaft you would use the CSS adapter. http://www.golfworks.com/callaway-335-shaft-adaptor/p/BB9002/ http://www.golfworks.com/callaway-350-shaft-adaptor/p/CSS/
Answered by: JimY
Date published: 2016-06-21
  • y_2017, m_10, d_18, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_BB9026, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks