Club Shield Paste Gel

Club Shield Paste Gel

16 oz. Paste
In Stock

Club Shield Paste Gel

Club Shield Paste Gel is rated 4.0 out of 5 by 4.
Rated 5 out of 5 by from Crucial for any club repair shop A necessary product for saving the newer plastic shaft adapters, as well as protecting the new colors available from various manufacturers. This paste will protect anything from harmful heat during any procedure. Golfworks provides the very best in products and service.
Date published: 2016-06-27
Rated 5 out of 5 by from Club Shield Paste I have used this product for several years. It is a must product when applying heat to a shaft or clubhead. The only complaint I have is to why the manufacturer no longer carrys the paste in a spray bottle. I definitely recommend this product. Maybe the manufacturer could supply an applicator.
Date published: 2016-06-04
Rated 5 out of 5 by from outstanding!!!! Great product! Very helpfull and time saver. Great value.
Date published: 2015-07-15
Rated 1 out of 5 by from Worst product ever I thought this product would be great for use on white drivers as the tends to cause some discoloration. Not sure what went wrong but when I tried to use it the product kept the heat from dispersing correctly and the epoxy would not release. I ended up ruining two shafts :(.
Date published: 2017-09-13
  • y_2017, m_9, d_21, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_GW1039, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

How is heat applied when removing a driver shaft adapter covered with Club Shield on a graphite shaft? Heat directly to the adapter or with hot rod inside the shaft?

Asked by: Clem
You cover the plastic parts of the adaptor with the Club Shield and heat the non covered part of the adaptor. You heat directly to the adaptor, we use a heat gun. We would not recommend a heat rod down inside the shaft if you are trying to save the shaft.
Answered by: JimY
Date published: 2017-09-01

Do still apply heat directly on the plastic adapter with the jell on adapter or do I have to run a hot rod down the shaft? Also using my graphite shaft extractor will it smash/damage the ferrule? Thanks!

Asked by: Mike
The Club Shield is used to protect areas that you do not want to heat. You would cover the plastic areas with Club Shield to protect them when you heat. If you are removing a shaft adaptor it is best to use the OEM Adaptor Saver Kit (GW0130) to pull the shaft adaptor off the shaft so that you are less likely to damage the plastic ferrule.
Answered by: JimY
Date published: 2017-05-22

Does this stuff get put on the hosel to keep the finish from browning out. Have an aeroburner driver and the white paint doesn't take heat well. Thanks

Asked by: Mlh7933
The Club Shield can protect the metal surface from from heat damage. It is less effective on painted surfaces, but can still prevent some heat related discoloration. If you use it, be liberal with it on the area you are trying to protect and you may need to re-apply several times during the heating process.
Answered by: GW2002
Date published: 2017-03-23

How are you applying heat shield? I am currently using a very small paint brush

Asked by: Chuck
Personally I apply it using my finger. It works fine that way for me.
Answered by: JimY
Date published: 2016-11-21

why did you do away with the spray bottles? Clubs By Design. Cust. #249473 /

Asked by: Chuck
I liked the spray bottles as well but it tended to dry up before you could use it all. That is why we no longer carry it that way.
Answered by: JimY
Date published: 2016-05-16

Is this product effective in avoiding melting of the plastic portion of Taylor Made adaptors?

Asked by: jpro2001
Yes we use the Club Shield to protect the plastic ferrule on Taylor Made and other adaptors and it has worked well.
Answered by: JimY
Date published: 2017-03-09
  • y_2017, m_9, d_21, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_GW1039, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks