Collared Golf Club Ferrules

Collared Golf Club Ferrules


BB0002 - Wood .335 - 1/4" length (Dozen)
$3.99
In Stock
BB0003 - Wood .350 - 1/4" length (Dozen)
$3.99
In Stock
BB0005 - Wood .335 - 1/2" length (Dozen)
$3.99
In Stock
BB0007 - Wood .350 - 1/2" length (Dozen)
$3.99
In Stock
BB0006 -Wood .335 - 1/2" length (Dozen)
$3.99
In Stock
BB0004 - Iron .370 - 1/4" length (Dozen)
$3.99
In Stock
BB0008 - Iron .370 - 1/2" length (Dozen)
$3.99
In Stock
BB0001 - Iron .370 - 3/4" length (Dozen)
$3.99
In Stock
BB0009 - Iron .355 - 3/4" length (Dozen)
$3.99
In Stock

Collared Golf Club Ferrules

Collared Ferrules are designed specifically for use with graphite golf shafts. The ferrule collar fits into the club head's hosel to cushion the contact point between the shaft and hosel.

Collared Golf Club Ferrules is rated 3.6 out of 5 by 5.
Rated 2 out of 5 by from Size is not correct. I like one other person bought the .355 taper tip collar. The interior diameter is less than ..355 and you have to sand the shaft excessively in order to get it to fit. Like the other review, I had to drill out the interior diameter to get it to fit on a .355 shaft. Lousy engineering.
Date published: 2017-07-10
Rated 5 out of 5 by from nice ferrule I buy these for shafting irons. The 370 are very snug on 370 shafts so they work very well on 355 tapers. Minimal turning if any is required due to size of the ferrules and the collar makes for perfect alignment without having to readjust loft and lie in most cases.
Date published: 2016-02-06
Rated 1 out of 5 by from ferrules The ferrules would not fit the shafts that I purchased at the same time. I had to drill out the inner diameters and in so doing, scuffed up the outer surface.
Date published: 2015-07-27
Rated 5 out of 5 by from Callaway Apex Replacement I broke the Recoil Shaft in my Apex CF 16 #6 Iron. Replaced it using the 3/4" Ferrule and it fit perfect.
Date published: 2016-06-01
Rated 5 out of 5 by from Help Need help with finding a ferrule for my TM aeroburner putting on a .350 tip shaft
Date published: 2017-05-24
  • y_2017, m_10, d_18, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_BB0001, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Trying to find ferrules for a 2009 Taylormade Tour Burner iron set. Current ferrules are 7/8" and double silver banded. What can I use for a like for like replacement? Also, are these collared?

Asked by: Vardongrip
The Taylor Made Universal ferrule (BB9071) would fit the 2009 Tour Burner Irons. We do not have a collared ferrule with 2 chrome rings. The BB9071 is 1/2" long. The BB0001 collared ferrule is 3/4" long and would be the closest match in length that we have in a stock collared ferrule.
Answered by: JimY
Date published: 2017-10-10

will these fit the M2 fairway woods?

Asked by: wayne65
Yes the BB0006 would work for the M2 fairway woods.
Answered by: JimY
Date published: 2017-10-02

I ask what ferulle was the one that fits the calaway diabalc edge driver 335 shaft and I was told it would take three or more days for that info.

Asked by: chillie
To install a .335" tip size shaft in the Diabalo Edge you need the BB9025 Callaway adaptor for the .335" size. https://www.golfworks.com/callaway-hosel-adaptor/p/BB9025/
Answered by: JimY
Date published: 2017-09-25

whitch ferulle is for the callaway diabalo edge 335 shaft for the driver.

Asked by: chillie
To install a .335" tip size shaft in the Diabalo Edge you need the BB9025 Callaway adaptor for the .335" size. https://www.golfworks.com/callaway-hosel-adaptor/p/BB9025/
Answered by: JimY
Date published: 2017-09-25

Will be reshafting some Calloway x20 irons    Have not pulled a shaft yet but wondered which ferrules were required.... Thanks!  As soon as I know then Imcan order the shafts, tip pins, grips...

Asked by: Bob
The Callaway X20 irons use the BB9003 ferrules. https://www.golfworks.com/callaway-collared-iron-ferrule-370/p/BB9003/
Answered by: JimY
Date published: 2017-09-05

Which ferrule would fit Ping G30 Hybrid? Ping G20 Driver? Thank you

Asked by: Jonathan
The Ping BB9047 iron ferrule could also be used on the G30 hybrid. For the Ping G20 driver which used a.350" tip size shaft if you want to install a .335" tip size shaft you need to use the BB9048 .335" size and if you are installing a .350" tip size shaft you would use the BB9048 .350" size. The BB9048's are both showing on backorder and are not due in until the end of August. For installing a .335" tip size shaft you could also use the Universal Plastic Shim (BB9018) adaptor. These are in stock. You could also use the BB0007 ferrule if you are installing a .350" tip size shaft into the Ping G20 driver. They are also in stock.
Answered by: JimY
Date published: 2017-08-04

What ferrule do I need for TaylorMade M2 (2017) fairway wood?  

Asked by: Norboo
The BB0006 collared ferrule would match up to the stock Taylor Made ferrule.
Answered by: JimY
Date published: 2017-09-04

What size ferrule is used on 716 ap1 irons? And does it matter if they are collared? 

Asked by: Bogeyboom
The Titleist BB9063 AP1 & AP2 ferrules would be the ones you need. https://www.golfworks.com/the-golfworks-ap1-ap2-355-iron-ferrule/p/BB9063/
Answered by: JimY
Date published: 2017-07-17
  • y_2017, m_10, d_18, h_21CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_96
  • loc_en_US, sid_BB0001, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks