FST Steel Putter Shafts

FST Steel Putter Shafts

Straight Stepped - 370 tip (112g) 35 inch.
In Stock
Straight Stepless - 370 tip (125g) 35 inch.
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

We Also Recommend

FST Steel Putter Shafts

FST steel putter shafts are a cost effective and perfect for OEM replacement.

  • .370" tip diameter
  • Available in a straight stepless and straight fluted profile

Trimming Instructions

FST Steel Putter Shafts is rated 4.5 out of 5 by 2.
Rated 5 out of 5 by from Great value putter shaft! Purchased the stepless option as I prefer the sleek look. Very happy with both the quality and the very reasonable price.
Date published: 2017-03-21
Rated 4 out of 5 by from Great value great value for the price. Well constructed. Willl purchase again
Date published: 2014-02-28
  • y_2017, m_3, d_28, h_17
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_FS0006P, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will this shaft fit an Odyssey White Hot center shafted putter?

Asked by: Gary
Without knowing which White Hot center shafted putter you have it is difficult to say for sure. From images of the different models, it appears the FS0006P would work, but again, can not be for sure. If you could specify the model, we could possibly be more definitive.
Answered by: GW2002
Date published: 2017-02-17

I have a KZG putter head with no shaft new old stock. It will need a center shaft. If you can recommend one that will be great. Thanks for your time in this case. 

Asked by: maddmattie80
If you happen to have the DS-5 KZG center shaft over the post model putter head it would use the TT1009P shaft. This shaft is designed to be used with over the post models. They control the ID measurement at the tip end of the shaft to better fit the over the post models. https://www.golfworks.com/true-temper-straight-taper-steel-putter-shafts/p/YST/
Answered by: JimY
Date published: 2017-02-13

I have a TM Rossa maranello sport 2 putter that i need a shaft for. The .370 replacement shaft i have is very loose even without abraiding. What tip dia do i need?

Asked by: bsrgolf
This putter would use a .370" tip diameter putter shaft. It may be a case of the shaft tip being a little undersize or the hosel bore being a little to large. Many times .370" hosel bores are done with a 3/8" bit which measures .375". If the shaft rotates that is not a problem but if it wobbles then you want to keep it centered. You could use some Quik Center (QCSB) mixed with your epoxy to help fill the space and keep the shaft center in the bore.
Answered by: JimY
Date published: 2017-01-04

Hello, I have a putter that is very very similar to the Wilson 8802 putter that happens to be made by RAM golf. This is a RH forged blade putter from 1985. I think that the shaft needs to be changed out on it. Will this putter shaft work? Thanks.

Asked by: Trent
If Ram truly patterned it after the Wilson 8802 then it would use the TT0004P Flare Tip. This is the shaft for the Wilson 8802. I vaguely remember this Tom Watson Ram putter which was patterned after the 8802 and I am not positive but quite sure it had the flare tip shaft. The shaft installs onto this putter over a post. If the post is smaller in diameter at the top of the post and bigger or wider at the bottom of the post it uses the Flare Tip. If the post is the same size all the way down then it would use a .370" tip diameter putter shaft. http://www.ebay.com/itm/Golden-Ram-TW-Tom-Watson-Forged-Putter-8802-Style-with-Leather-Grip-34-/252369817039?hash=item3ac269cdcf%3Ag%3AgxgAAOSwM0FXIN8-
Answered by: JimY
Date published: 2016-12-21

Is the shaft hollowed or solid?

Asked by: Vuu
It is hollow. There are not solid golf shafts.
Answered by: JimY
Date published: 2016-12-12

I am looking for a shaft over putter shaft with a .320 ID. Prefer a single bend.

Asked by: Jerry
A .370" tip size shaft will fit over this post. They tend to fit a little loose. We currently do not offer or stock any single bend putter shafts. We could do a custom bend shaft but we do request that you send in the putter head to make sure we get it set up correctly.
Answered by: JimY
Date published: 2016-12-01

what shaft fits the Ping Pal 2 putter?

Asked by: Dick 623
For the Ping Pal 2 putter you need the TT0004P putter shaft. It has the Flare Tip that will fit properly over the post of this putter. This is the only shaft we stock that will fit this putter.
Answered by: JimY
Date published: 2016-11-14

What is the correct replacement shaft for an Odyessy DFX center shafted 2 Ball putter?

Asked by: CaptMike
You could use any .370" tip diameter putter shaft. The True Temper TT1009P is actually designed to be used with over the post putters like this one. http://www.golfworks.com/true-temper-straight-taper-steel-putter-shafts/p/YST/
Answered by: JimY
Date published: 2016-11-10
  • y_2017, m_3, d_26, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_FS0006P, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks