Golf Club Iron Ferrules - Colored Trim Ring

Golf Club Iron Ferrules - Colored Trim Ring


52PI Dozen - Black/Chrome Std .370" Iron Ferrules
$3.99
In Stock
70PI Dozen - Black/Chrome Long .370" Iron Ferrules
$3.99
In Stock
53PI Dozen - Black/White Std .370" Iron Ferrules
$3.99
In Stock
54PI Dozen - Black/Gold Std .370" Iron Ferrules
$3.99
In Stock
71PI Dozen - Black/Gold Long .370" Iron Ferrules
$3.99
In Stock
55PI Dozen - Black/Red Std .370" Iron Ferrules
$3.99
In Stock
56PI Dozen - Clear/Black/Clear Std .370" Iron Ferrules
$3.99
In Stock
57PI Dozen - Gold/Black/Gold Std .370" Iron Ferrules
$3.99
In Stock
58PI Dozen - Chrome/Black/Chrome Std .370" Iron Ferrules
$3.99
In Stock
72PI Dozen - Chrome/Black/Chrome Long .370" Iron Ferrules
$3.99
In Stock
86PI Dozen - White/Black .370" Iron Ferrule
$4.99
In Stock
73PI Dozen - Gold/Black/Gold .370" Iron Ferrules -
$3.99
In Stock
52PI Single - Black/Chrome Std .370" Iron Ferrule
$0.50
In Stock
70PI Single - Black/Chrome Long .370" Iron Ferrule
$0.50
In Stock
53PI Single - Black/White Std .370" Iron Ferrule
$0.50
In Stock
54PI Single - Black/Gold Std .370" Iron Ferrule
$0.50
In Stock
71PI Single - Black/Gold Long .370" Iron Ferrule
$0.50
In Stock
73PI Single - Long Blk /Gold/Blk .370"" Iron Ferrule"
$0.50
In Stock
55PI Single - Black/Red Std .370" Iron Ferrule
$0.50
In Stock
56PI Single - Clear/Black/Clear Std .370" Iron Ferrule
$0.50
In Stock
57PI Single - Gold/Black/Gold Std .370" Iron Ferrule
$0.50
In Stock
58PI Single - Chrome/Black/Chrome Std .370" Iron Ferrule
$0.50
In Stock
72PI Single - Chrome/BLack/Chrome .370" Iron Ferrule
$0.50
In Stock

Golf Club Iron Ferrules - Colored Trim Ring

HUGE GOLF FERRULE SELECTION! A complete selection of ferrules with modern outside diameters that match perfectly to the outside diameter of our hosels. All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!

Golf Club Iron Ferrules - Colored Trim Ring is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from Add a touch of class to your clubs ! I have the 55PI black/red ferrules on my Maltby TE Irons as well as my Maltby Hybrid and it adds enough color to make it look classy. Why not customize them to each person's liking. Impressed Again, Thank You.
Date published: 2014-06-14
Rated 5 out of 5 by from Add a touch of class to your clubs ! I have the 55PI black/red ferrules on my Maltby TE Irons as well as my Maltby Hybrid and it adds enough color to make it look classy. Why not customize them to each person's liking. Impressed Again, Thank You.
Date published: 2014-06-14
Rated 5 out of 5 by from 350 Ferrules These ferrules are perfect and easy to use. I prepare them by softening them in boiling water. I slip them on and use the clubhead to seat their final position. Beautiful finish - the best.
Date published: 2008-03-17
Rated 5 out of 5 by from 350 Ferrules These ferrules are perfect and easy to use. I prepare them by softening them in boiling water. I slip them on and use the clubhead to seat their final position. Beautiful finish - the best.
Date published: 2008-03-17
  • y_2017, m_10, d_16, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_52PIS, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

what size ferrule do I need for Titleist irons? The say tip size is 355 but you show 370?

Asked by: lfalsetto
I would recommend the Titleist ferrule we stock for the Titleist irons. Even if you do not have AP1's or AP2's it should still fit the other models. https://www.golfworks.com/the-golfworks-ap1-ap2-355-iron-ferrule/p/BB9063/
Answered by: JimY
Date published: 2017-09-12

what ferrule size for mizuno jpx 850 hybrid, please? thanks, Gordon

Asked by: gcpt
The 74PI would match the stock ferrule used by Mizuno for the JPX 850 Hybrid.
Answered by: JimY
Date published: 2017-09-11

Hey JY! Picked up a Wilson FG V4 7 iron to mess with. Now, putting it back to original and trying to find close match to the original ferrule (single chrome ring). Think 70PI but not sure on the length. DG Pro is .355 taper. Any ideas? Thanks

Asked by: John S
In looking at a picture of the Wilson FG V4 irons I would say the 52PI would be the best match. The ferrule on the V4 looks to be in the 1/2" length range. https://www.golfworks.com/golf-club-iron-ferrules-colored-trim-ring/p/52PIS/
Answered by: JimY
Date published: 2017-07-31

What size ferrule would I need for putting some .355 Project X shafts into CObra F7 Forged One Length irons? Thanks in advance

Asked by: JDL
The 66TI looks to match the length that Cobra uses on the F7 Forged One irons and it is a taper tip ferrule. Cobra is likely using a collared ferrule with these irons and the BB0001 collared ferrule would work even though it is a .370" ferrule. Taper tip shafts taper out to approximately .370" where the shaft exits the top of the hosel so the .370" ferrule will fit.
Answered by: JimY
Date published: 2017-07-12

What size ferrule is standard for graphite irons ? 

Asked by: Red
Most graphite iron shafts will use a .370" size ferrule so any of our ferrules coded PI will work.
Answered by: JimY
Date published: 2017-04-04

Replacing the shaft on an Adams "a12 os" wedge. Using a True Temper TTLITE men's steel shaft "UTTXLIC-43Z". Which ferrule should I use?

Asked by: Buzz
The 70PI looks like it matches well to the stock ferrule that Adams used on these irons.
Answered by: JimY
Date published: 2017-03-27

I'm looking for ferrules for my .355 taper tip project x LZ shafts. Which size do I need?

Asked by: Rjay1302
Any of the Taper tip ferrules we carry will work. The decision is yours as to what length you want on your particular irons. Options are .500 inches, .875 inches or 1.00 inch length.
Answered by: GW2002
Date published: 2017-03-21

I'm shimming a .355 taper tip AeroTech SteelFiber shaft into a .370 hosel on Taylormade Rocketbladez irons.  Which ferrule do I need?

Asked by: SLLoyd
To properly shim these shafts you should use a Shim like the SHIMT (.355 - .370) to make the shaft properly fit the clubhead. The ferrule will not do this. Even with the taper tip shafts you can still use a .370" ferrule size because the shaft tapers out to approximately .370" where it exists the top of the hosel. Taylor Made used a ferrule like the 52PI with these irons. https://www.golfworks.com/golf-club-iron-ferrules-colored-trim-ring/p/52PIS/ https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2017-03-14
  • y_2017, m_10, d_16, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_51
  • loc_en_US, sid_52PIS, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks