Golf Club Wood Ferrules - Black

Golf Club Wood Ferrules - Black


59PW - Blk Short .335" (Dozen)
$2.49
In Stock
59PW - Blk Short .335" (Single)
$0.35
In Stock
60PW - Blk Std .335" (Dozen)
$2.49
In Stock
60PW - Black Std .335" (Single)
$0.35
In Stock
80PW - Blk Oversize, .335" (Dozen)
$2.49
In Stock
61PW - Blk X-Long, .335" (Dozen)
$2.49
In Stock
61PW - Black X-Long, .335" (Single)
$0.35
In Stock
81PW - Blk Oversize, .335 (Dozen)
$2.49
In Stock
62OW - Blk Short, Oversize, .350" (Dozen)
$2.49
In Stock
62OW - Blk Short, Oversize, .350" (Single)
$0.35
In Stock
82PW - Blk Oversize, .350" (Dozen)
$2.49
In Stock
63OW - Blk Short, Oversize, .370" (Dozen)
$2.49
In Stock
63OW - Blk, Short Oversize, .370" (Single)
$0.35
In Stock
64OW - Blk Short, Oversize, .400" (Dozen)
$2.49
In Stock
64OW - Blk Short, Oversize .400" (Single)
$0.35
In Stock

Golf Club Wood Ferrules - Black

HUGE GOLF FERRULE SELECTION!

A complete selection of ferrules with modern outside diameters that match perfectly to the outside diameter of our hosels. All ferrules have a 19° countersink which allows a cushion of epoxy to form between the top of the hosel and the inside of the ferrule, strengthening the bond. Each ferrule also is “pre-washed,” arriving at your shop with a high-gloss finish and no need for an acetone wipe to make it shine!

Golf Club Wood Ferrules - Black is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Great product Product fit my needs. Excellent transaction. Fast delivery
Date published: 2017-10-08
  • y_2017, m_10, d_21, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_60PW, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

what size ferrule for a rocketballz driver and a 335 tip

Asked by: richard
The 60PW will work for the RBZ driver.
Answered by: JimY
Date published: 2017-10-09

it was recommended that I use a 65PW fuerrel with the Maltby L Tech Driver can't locate any on your site

Asked by: olddog41
Not sure where the 65PW came from, but there is no 65PW. The 60PW is a standard black .500" length ferrule that is used a lot, and the 59PW is a shorter version, at .250 in length. Either will work and both will look good.
Answered by: GW2002
Date published: 2017-09-21

Are older wilson shafts all screwed into the clubhead?And

Asked by: Mike
No, not all of the older Wilson shafts were screwed into the clubhead. We do not have a list of the ones that are and the ones that are not. With the older Wilson Dynapower irons they did use a .340" taper tip shaft, even the thread in shafts were .340" taper tip. To reshaft these today you need to ream or rebore the hosel and you have to be careful not to ream or rebore to deep as it can get to where the hosel walls are to thin and could bend and even break. I always rebored these to 1 3/8" deep.
Answered by: JimY
Date published: 2017-09-12

What is the correct replacement ferrule part number for a Titleist 909 Driver?

Asked by: Jay
I am not sure if Titleist used a collared ferrule on the 909 driver. If they did the BB0006 would be the replacement. You could also use the 60PW ferrule and if they did use a collared just make sure the area where the collar fits fills with epoxy during assembly.
Answered by: JimY
Date published: 2017-08-30

I have an old Mizuno CLK Fli Hi .370 tipped hybrid I want to reshaft. What ferrule would you recommend for this?

Asked by: Bs425
From looking at a picture of this hybrid it looks like the 61PI would be a very good match to the original ferrule used by Mizuno.
Answered by: JimY
Date published: 2017-08-23

will the .400 ferrule work with the Nike STR8-FIT driver? Would you have to drill that ferrule out inside?

Asked by: otts43
BB9033 is the code for the ferrule for the Nike STR8-Fit adaptor. https://www.golfworks.com/nike-str8-fit-adaptor/p/BB9033/
Answered by: JimY
Date published: 2017-08-17

What ferrule would you use on a ping g30 with a RIP Phenom shaft?

Asked by: Chittick77
If you are looking for the ferrule for the Ping G30 shaft adaptor it is the BB9078. https://www.golfworks.com/the-golfworks-ping-g-series-adaptor-ferrule/p/BB9078/
Answered by: JimY
Date published: 2017-08-16

Which ferrule do I need for a King Cobra XSpeed Pro D? Thanks

Asked by: Clayton
In looking at pictures the stock Cobra ferrule looked like the 58PW. https://www.golfworks.com/golf-club-wood-ferrules-colored-rings/p/52PWS/ You could use any .335" PW wood ferrules plain black or trim rings.
Answered by: JimY
Date published: 2017-08-15
  • y_2017, m_10, d_22, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_41
  • loc_en_US, sid_60PW, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks