Grafalloy Pro Custom Graphite Iron Shafts

Grafalloy Pro Custom Graphite Iron Shafts


L/A Flex - 370 tip (74g) 1/2D3M
$19.99
In Stock
R/S Flex - 370 tip (77g) 3/4D3M
$19.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Grafalloy Pro Custom Graphite Iron Shafts

The Grafalloy Pro Custom graphite iron shaft is the ultimate shaft for all clubmaking options.

Features:
  • .370" tip diameter
  • Allows performance to be matched to each player's needs
  • Suitable for a wide range of players and club head styles

Trimming Instructions

Grafalloy Pro Custom Graphite Iron Shafts is rated 5.0 out of 5 by 7.
Rated 5 out of 5 by from Stable and. Consistent I assembled these into a set of TE forged irons. I had the need to reduce vibration due to elbow problems. I love these shafts. They feel very stable which I had not found in some other graphite shafts I tested. I also spine and flow my shafts and every single shaft had the graphics perfectly aligned. The only minor gripe I have is the paint is easily scratched. Ball flight is high but not too high. Just right for me as i am a low ball hitter. These are great shafts.
Date published: 2013-02-28
Rated 5 out of 5 by from Good feel and flight I have been playing the Pro Custom iron shaft for a couple of years using an R flex shaft (soft stepped: trimmed for 3 iron used in 5 iron, trimmed for 4 iron used in 6 iron). As my swing speed has decreased in the last few years I noticed the ball flight for my long irons was getting lower with less distance. I installed the A flex shaft in my long irons and both launch angle and distance improved.
Date published: 2016-05-05
Rated 5 out of 5 by from Excellent Shafts These shafts offer a light weight high performance option at a very reasonable cost. I had read previous ratings that indicated these were high value shafts offering great performance and price. It sounded too good to be true, however my experience is these high ratings are right on. I am very pleased and highly recommend these shafts.
Date published: 2016-12-01
Rated 5 out of 5 by from WORKS AS RECOMMENDED I bought this shaft to replace and lengthen the shafts on my wedges to match my 8 iron. Back surgery left me not as flexible as before and these shafts work great on my gap, sand and lob wedges. Plus they are a good value. Thanks for the service and the product.
Date published: 2017-02-22
Rated 5 out of 5 by from Stable and. Consistent I assembled these into a set of TE forged irons. I had the need to reduce vibration due to elbow problems. I love these shafts. They feel very stable which I had not found in some other graphite shafts I tested. I also spine and flow my shafts and every single shaft had the graphics perfectly aligned. The only minor gripe I have is the paint is easily scratched. Ball flight is high but not too high. Just right for me as i am a low ball hitter. These are great shafts.
Date published: 2013-02-28
Rated 5 out of 5 by from Great replacement shaft for my 7 Iron I bought the shaft about 1 month ago to replace the broken shaft in my Taylor Made 7 iron. After calling Golf Works for a little assistance I was able to install the shaft myself and it is a perfect replacement I can't tell any difference from the original shaft.
Date published: 2016-07-19
Rated 5 out of 5 by from Putter grip, nice. I purchased a Golf Pride putter grip, nice looking grip, very fast shipping. a great transaction.
Date published: 2015-08-31
  • y_2017, m_9, d_24, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_TT201201, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What tip diameter do I need for taylormade M2 graphic irons?? what do I need for cobra utility tip diameter??

Asked by: scott
The Taylor Made M2 irons use a .370" tip size shaft. The Cobra Utility iron uses a .355" taper tip shaft. https://www.golfworks.com/oem-shaft-replacement-guide/a/376/ https://www.golfworks.com/images/art/Cobra.pdf https://www.golfworks.com/images/art/TaylorMade.pdf
Answered by: JimY
Date published: 2017-08-28

do graffalloy pro custom graphite shafts work on ping gmax irons

Asked by: pj1
No, the Grafalloy ProCustom iron shafts will not fit the Ping G Max irons. The Ping G Max irons use a .355" taper tip shaft.
Answered by: JimY
Date published: 2017-08-17

Can these shafts be used for hybrids? I.e. Adams Speedline Hybrids?

Asked by: hecgolf
The ProCustom iron shafts (TT201201) can be used for hybrids with a .370 hosel bore. They should work in the Adams hybrids.
Answered by: GW2002
Date published: 2017-06-07

I have Wilson staff F5 irons with Dynamic Golf XP shafts will the Grafalloy Pro Custom Graphite Iron Shafts fir these irons. please advise.

Asked by: Dadwholuvsgolf
No the Grafalloy ProCustom shafts will not fit the Wilson Staff F5 Tour irons. The F5 Tour irons use a .355" taper tip shaft and the ProCustom shafts are only available in a .370" parallel tip which is to large to fit. You might look at the Xcaliber (AS0028). It is a very good inexpensive .355" taper tip shaft that will fit the F5 Tour irons. https://www.golfworks.com/axe-xcaliber-taper-tip-graphite-iron-shafts/p/AS0028/
Answered by: JimY
Date published: 2017-03-14

I want to install Grafalloy Pro Graphite Shafts senior flex in my Adams Idea A12 of iron heads. The depth inside the hosel is one half inch, will they work?

Asked by: JDP
The Adams A12 Pro or the Adams A12 OS iron heads have more than a 1/2 " bore depth. The depth of the hosels should be at a minimum 1.25". Generally, you do not want the iron shaft to to be installed in bore depths of less than 1.25". Check the hosel bore of the head you are referencing to be sure there is not an obstruction (old epoxy, tip weight). Again, the bore deph should be at least 1.25".
Answered by: GW2002
Date published: 2017-03-06

Can I put these shafts on my titles ap 2 irons, I have Nippon 1050 shafts on them now and not getting the distance that I think I should have, could be my age 66

Asked by: Tom
The Grafalloy ProCustom iron shafts will not fit the AP2 Titleist irons. The Titleist irons use a .355" taper tip shaft and the ProCustom is only available in a .370" parallel tip, which is to large to fit the Titleist irons. You might look at the Xcaliber Irons (AS0028). They are a very good inexpensive shaft that will fit your AP2 irons. https://www.golfworks.com/axe-xcaliber-taper-tip-graphite-iron-shafts/p/AS0028/
Answered by: JimY
Date published: 2017-03-07

Can these graphite iron shafts in L/A flex be used @ 37 in length as they come std in 43 in ?

Asked by: Hutch
Yes they can be used at 37". You will need to trim both the tip end per the instructions and butt cut them to your finished club length.
Answered by: JimY
Date published: 2017-03-06

What's your a pinion on these shafts for wedges? 

Asked by: RickyP8
The Grafalloy ProCustom is an iron shaft not a wedge specific shaft. It certainly can be used in wedges if your wedges use a.370" parallel tip size shaft and if it's specifications fit the players needs it can work well. It is a very good inexpensive graphite shaft.
Answered by: JimY
Date published: 2017-03-03
  • y_2017, m_9, d_24, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_28
  • loc_en_US, sid_TT201201, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks