Grafalloy ProLaunch Blue 65

Grafalloy ProLaunch Blue 65

65X Flex - 335 tip (64g) 5B2H
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Grafalloy ProLaunch Blue 65

The Grafalloy Prolaunch Blue graphite wood shaft is the first graphite shaft designed and engineered through the use of a launch monitor - available in .335" and .350" tip diameters.

Prolaunch Blue 65 Series
  • Incorporates patent-pending Dynamic Torsional Stability for added control
  • Shaft design decreases the likelihood of hooks or slices
  • Increases launch angle for more distance

Trimming Instructions

Not Found.

looking for tp shaft, graffloy prolaunch blue 65 grams stiff for jetspeed taylormade. I am 6ft tall, the length says 46 inches on this shaft?

Asked by: Kirby
To install the ProLaunch Blue 65 shaft into the Jet Speed driver you would need to use the BB9065 shaft adaptor.
Answered by: JimY
Date published: 2017-09-05

Tipping instruction for this shaft

Asked by: Lee
This shaft follows trim code W2. Scroll down to the last page and follow W2. For a driver you would not tip trim anything.
Answered by: JimY
Date published: 2017-01-27

I just bought a new Callaway Rx XR pro 16 men's driver speeder evolution 'll stiff shaft is this shaft to stuff I keep going left no control I did have a r flex in my last driver swing speed between 80 to 90 sometimes better

Asked by: TG golf
With a swingspeed in the 80 to 90 mph range an R flex would be a better choice then the S flex. The Grafalloy ProLaunch Blue 65 R flex (TT0107) is a good shaft that could work well.
Answered by: JimY
Date published: 2016-12-12

I have both the R9 13* and 17* heads had the Pro Lauch Red in the 17* and was hitting bombs Put in the 13* and was hitting nuclear mid flight bombs!!  Now looking to put the blue maybe in the 4 wood or maybe 3. I have a swing speed of 115.. can I get this

Asked by: Pitbull
The ProLaunch Blue 65 X flex could work well. This is the previous model and the TT0107 is the current model. The shafts are the same as the old one with new color and graphics.
Answered by: JimY
Date published: 2016-12-05

Do You have this model in a 65-R flex?

Asked by: Yogi
This is an older model of the ProLaunch Blue 65 that has been discontinued and we are sold out of the R flex. The TT0107 ProLaunch Blue 65 is the same shaft as the old shaft with a new color and graphics.
Answered by: JimY
Date published: 2017-02-10

do you have the 65 S- 46 inches in stock

Asked by: hammer head
No we do not have an S flex available in this older model ProLaunch Blue. We do have the S flex available in the TT0107 ProLaunch Blue. This is the same shaft as the older model with new color and graphics.
Answered by: JimY
Date published: 2016-09-20

Have a Taylormade m2 driver with stock TM s shaft. Tried both s and x flex and can't get a consistent flight. Head is 10.5 degree. Swing speed is avg 104-106. Can u recommend me affordable shaft! Looking at the grafalloy brand!

Asked by: Ferg
If you are looking for a higher ball flight the ProLaunch Blue (TT0106) or the ProLaunch Blue Supercharged (TT0109), which has a higher balance point, are both designed for a higher ball flight. If you are looking for a lower ball flight the the ProLaunch Red (TT0105) or ProLaunch Red Supercharged (TT0110). All of these are good shafts and could possibly help you.
Answered by: JimY
Date published: 2016-06-09

I have a 65s what are the cutting instructions for a driver shaft?

Asked by: Dale
Tip trimming would be 0" for the driver.
Answered by: JimY
Date published: 2016-04-25
  • y_2017, m_10, d_20, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_en_US, sid_TT202207, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks