Grafalloy ProLaunch Red Graphite Iron Shaft

Grafalloy ProLaunch Red Graphite Iron Shaft


R Flex - 355 tip (37.5) - 3B1H
$39.99
In Stock
S Flex - 355 tip (37.5) - 4C1H
$39.99
In Stock
S Flex - 355 tip (38) - 4C1H
$39.99
In Stock
S Flex - 355 tip (38.5) - 4C1H
$39.99
In Stock
S Flex - 355 tip (39) - 4C1H
$39.99
In Stock
S Flex - 355 tip (40) - 4C1H
$39.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

We Also Recommend

Grafalloy ProLaunch Red Graphite Iron Shaft

The Grafalloy Prolaunch Red graphite wood shaft promotes a lower ball flight than the original ProLaunch with all the same performance characteristics.

Features:
  • .355" and .370" tip diameters available
  • .355" varied lengths; .370" available in 40in
  • Features Micro-Mesh tip technology
  • Ultimate combination of power and tour-caliber trajectory built upon the unequaled performance benefits of Prolite 35 graphite shaft

Trimming Instructions

Not Found.

It looks like the prolaunch red grafalloy shaft is no longer available. what is the best replacement?

Asked by: pete
We only have a few lengths of the TT0022 Pro Launch Red .355 taper tip iron shafts remaining. They wee discontinued several years ago. They were a 87-88 gram shaft with a high bend point and firm tip, which means they were a lower trajectory shaft. The AeroTech SteelFiber 80CW is a .355 taper tip shaft that weights 85 grams and is a mid trajectory shaft. That is the most similar in specification that we currently have.
Answered by: GW2002
Date published: 2017-05-05

do they make a senior flex in this shaft

Asked by: raymond2344
No Grafalloy never made a senior flex in the ProLaunch Red iron shafts. These shafts were discontinued a few years ago and what we have listed is all we have left.
Answered by: JimY
Date published: 2017-04-24

I have a Nike convert 2.0 hybrid on the kuro kage black 70g but i want to fit the prolaunch red hy series that is actually on a Adams hybrid 2 head...I want to know if it's possible to fit it on the Nike head (hybrid 4) if yes how do I trim it. Thks

Asked by: Felixal
The Prolaunch red hybrid shaft should fit the Nike head. Both required a .370 tip hybrid shaft. As far as the trim, unless there was a difference in head weight, or in the length you were going to play, it is difficult to be specific on any trim adjustment you might make. If the Nike head was significantly heavier, like 7 grams or more, you could trim a little from the tip to maintain the same flex feel with the heavier head weight. This would affect the playing length and assuming the clubs were the same length to begin with, anything you trim from the tip would make the playing length shorter.
Answered by: GW2002
Date published: 2017-03-21

I have a set of Nike VR-S Covert Irons: with Dynalite 90 Steel shafts, R,S /95/ .370"/ .600"/. I would like to have them switched to graphite shafts but I have no idea what I am looking for. Can you recommend a few different shafts.

Asked by: Chuckster
I would look at some shafts like the Kuro Kage Black 2nd Gen (MR0046). It is a mid trajectory shaft that could work well with the VR-S Covert Irons. Another very good shaft would be the Xcaliber (AS0023) which is a mid high trajectory shaft. The Dynalite 90 shaft is a mid high to high trajectory shaft. Other shafts like the Grafalloy ProCustom (TT202201) and Graphite Design G-Tech (GD0012) are also very good shafts that could work well. You might want to use our Maltby MPF Shaft Fitting program to help determine which shaft playing characteristics could best fit for you and see what shafts come up for you. http://www.golfworks.com/mpf-shaft-fitting-worksheet/a/496/
Answered by: JimY
Date published: 2017-01-05

what shaft trimming code should be used for the grafalloy prelaunch axis iron shafts?

Asked by: wade
You would follow trim code IR3 for the ProLaunch Blue Axis iron shafts. http://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2016-11-30

What is he weight in grams for a 36 in. wedge shaft Reg. flex.

Asked by: RGR
They were listed as 87 grams for the R flex.
Answered by: JimY
Date published: 2016-07-13

Hello I would like to put new shafts on Ping eye 2 ber irons , I have 2-lw I want to reshaft the 2-9 irons in a senior flex what can fit these irons and my game

Asked by: Gino
For the Ping Eye 2 BeCu irons you will need a .355" taper tip shaft. In steel with a .355" taper tip and Senior flex we have the Nippon N.S. Pro 8950GH (NP0005) A flex and the Nippon N.S. Pro Zelos 7 (NP0014) A flex. In graphite shafts we have the Aerotech SteelFiber 70CW (AT0020I) in A flex. None of these shafts are available in a 2 iron shaft. The sets start with a 3 iron shaft. You would have to use a 3 iron shaft in the 2 iron as well. http://www.golfworks.ca/nippon-pro-ns-pro-8950gh-steel-iron-shafts/p/NP0005/ http://www.golfworks.ca/nippon-zelos-7-355-taper-tip-iron-shafts/p/NP0014/ http://www.golfworks.ca/aerotech-steelfiber-70-cw-graphite-iron-shafts-355/p/AT0020I/
Answered by: JimY
Date published: 2016-07-07

is this compatible with Ping G20 irons? thanks.

Asked by: dan
This ProLaunch Red iron shaft will fit the Ping G20 but this is a high bend point firm tip shaft for a lower ball flight. The stock graphite shaft for the G20 would be more of a mid to mid/low bend point shaft for a mid to mid/high ball flight along the lines of this Xcaliber shaft. (AS0028) http://www.golfworks.com/axe-xcaliber-taper-tip-graphite-iron-shafts/p/AS0028/
Answered by: JimY
Date published: 2016-06-27
  • y_2017, m_5, d_25, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_TT0022, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks