Grafalloy ProLite 35 HL Graphite Wood Shaft

Grafalloy ProLite 35 HL Graphite Wood Shaft


A Flex - 335 tip (61g) 2D3M
$29.99
In Stock
R Flex - 335 tip (66g) 3D3M
$29.99
In Stock
S Flex - 335 tip (66g) 4B3M
$29.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Grafalloy ProLite 35 HL Graphite Wood Shaft

The Grafalloy Prolite 35 HL graphite wood shaft is the winningest lightweight shaft on the PGA Tour.

  • .335" tip diameter
  • Low kick point gives golfers the benefit of higher launch angles to maximize distance without sacrificing control and accuracy.

Trimming Instructions

Grafalloy Prolite 35 HL Golf Shaft Specifications

Grafalloy ProLite 35 HL Graphite Wood Shaft is rated 4.9 out of 5 by 16.
Rated 5 out of 5 by from This Changes Everything (for the better) I have an average 103 MPH driver swing speed, moderate tempo and shallow attack angle. I had been using Proforce 65 Gold's but the Graphalloy Prolite 35 HL is just what I needed in my fairway woods (3,5,7.) The ball lauches higher(without ballooning)and carries about 10 yards farther. Directional accuracy is better than with the Proforce 65 shafts. I just can not flex these Proforce shafts properly as swing speed is decreasing. I love the feel of these Prolite shafts and this translates into confidenece. I could not be more pleased with these shafts after the first few weeks of use.
Date published: 2013-10-12
Rated 5 out of 5 by from This Changes Everything (for the better) I have an average 103 MPH driver swing speed, moderate tempo and shallow attack angle. I had been using Proforce 65 Gold's but the Graphalloy Prolite 35 HL is just what I needed in my fairway woods (3,5,7.) The ball lauches higher(without ballooning)and carries about 10 yards farther. Directional accuracy is better than with the Proforce 65 shafts. I just can not flex these Proforce shafts properly as swing speed is decreasing. I love the feel of these Prolite shafts and this translates into confidenece. I could not be more pleased with these shafts after the first few weeks of use.
Date published: 2013-10-12
Rated 5 out of 5 by from Great shaft I got this shaft and put it into a '09 Burner head and am really diggin' it. The shaft I replaced was the stock TM regular flex which was just too whippy for my 105 MPH swing speed. I feel like I have much better control of the head and club face with this shaft and really like the feedback. I don't notice the shaft launches the ball any higher. Just regular trajectory for me.
Date published: 2011-12-24
Rated 5 out of 5 by from Great Shaft for Driver. I installed the A shaft for my driver looking for higher ball flight and more distance. It is working great. I guess a little more flex and torque is your friend as you get older. Hitting medium-high with a slight draw and picking up lost yardage. Glad I made the purchase.
Date published: 2016-09-21
Rated 5 out of 5 by from Great shaft I got this shaft and put it into a '09 Burner head and am really diggin' it. The shaft I replaced was the stock TM regular flex which was just too whippy for my 105 MPH swing speed. I feel like I have much better control of the head and club face with this shaft and really like the feedback. I don't notice the shaft launches the ball any higher. Just regular trajectory for me.
Date published: 2011-12-24
Rated 5 out of 5 by from Superb I am normally a low ball hitter. So I was looking for a shaft that will get the ball up. This shaft got the ball up to a perfect hight that sent it very deep for me. I had it assembled by Golfworks with the Maltby KE4 SSF1 driver head. Together, the flight of the ball is presicely straight. Absolutely fantastic.
Date published: 2009-07-27
Rated 5 out of 5 by from Superb I am normally a low ball hitter. So I was looking for a shaft that will get the ball up. This shaft got the ball up to a perfect hight that sent it very deep for me. I had it assembled by Golfworks with the Maltby KE4 SSF1 driver head. Together, the flight of the ball is presicely straight. Absolutely fantastic.
Date published: 2009-07-27
Rated 5 out of 5 by from Always Great Company To Deal With This review is about golf works more than the shaft I purchased. I've known the strand for many years. However I have known the golf works for longer than that. They are a quality organization and I always enjoy their Products and service.
Date published: 2016-08-26
  • y_2017, m_11, d_22, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_16
  • loc_en_US, sid_TT0057, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

will this work for a replacement shaft on caraway razr x black 10.5 driver?

Asked by: eastman
The Razr X Black driver used a .350" tip diameter shaft. You can use the ProLite 35 HL shaft as a replacement but you will have to shim the shaft to make it fit correctly into this driver. You can use the Universal Plastic Shim (BB9018) for this assembly. https://www.golfworks.com/universal-shim-with-ferrule-335/p/BB9018/
Answered by: JimY
Date published: 2017-07-17

I need a 3 wood shaft. Do u have one?

Asked by: Phil
The ProLite 35 HL shaft can be installed into a 3 wood. You will need to follow the recommended trimming instructions for installing this shaft into a 3 wood. You would need to trim 1/2" from the tip of the shaft before installing the shaft into a 3 wood.
Answered by: JimY
Date published: 2017-06-28

can this shaft be used in a 3 wood? or only in drivers?

Asked by: Phil
Yes the ProLite 35 HL can be used in a 3 wood. You would tip trim 1/2" from the tip end of the shaft, install it into the club and butt cut it to your finished length.
Answered by: JimY
Date published: 2017-06-27

65 Disable vet love playing golf and Iam playing R flex Wilson staff 10 looking to get a new shaftprolite 35 what would i need.

Asked by: FLO
There should be no problem putting the ProLite 35 HL into your Wilson Staff driver. Without knowing the specific model Wilson Staff driver you have I do not know if you need a shaft adaptor.
Answered by: JimY
Date published: 2017-05-23

I have a Taylormade m1 rescue3. I want to replace the stock shaft with a grafaloy A shaft, is it possible for to put an m1 tip at the stock length for the m1 rescue 3?

Asked by: Ron513
No. The Grafalloy ProLite 35 HL shaft is a .335" tip size wood shaft and the M1 Rescue 3 uses a .370" tip size shaft. The shaft adaptors for the M1 woods will not fit the Rescue.
Answered by: JimY
Date published: 2017-04-24

I have Cobra s3 head can up put the Cobra tip on? Do u have Senior flex or Lite flex

Asked by: benhogan7
No, with the S3 being an older model Cobra we no longer have a shaft adaptor that will work with this club. These days you would have to have the existing shaft adaptor reshafted with the new shaft. In the ProLite 35 HL shaft the senior flex is the A flex.
Answered by: JimY
Date published: 2017-04-12

What's the difference L hand shaft, r hand shaft

Asked by: Andy
In shaft Puring you need to indicate right or left hand so that when the shaft is Pured it will be marked correctly. It will come with a mark on the shaft for proper installation so that for either a right hand or left hand player the stiff side of the shaft will be facing the target. You can see more about SST Puring at this link. http://sstpure.com/
Answered by: JimY
Date published: 2017-04-10

What does the term "Torque" mean with regard to shaft specifications?

Asked by: senortools1
In a golf shaft Torque is a measurement of the shafts resistance to twisting. The higher the torque number the less it resists twisting, or the more it will twist, and the lower the torque number, the more it resists twisting or the less it twists. Higher torque will make a shaft feel more flexible and lower torque will make it feel stiffer.
Answered by: JimY
Date published: 2017-04-12
  • y_2017, m_11, d_22, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_20
  • loc_en_US, sid_TT0057, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks