Graftech Lite Graphite Iron Shafts

Graftech Lite Graphite Iron Shafts


L/A Flex - 370 tip (73g) 1B2M/2B2M
$11.99
In Stock
R/S Flex - 370 tip (73g) 3B2M/4B2M
$11.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Graftech Lite Graphite Iron Shafts

The Graftech Lite graphite iron shaft is an excellent alternative in both cost and quality to steel shafts.

Features:
  • .370" tip diameter
  • 100% graphite filament wound golf shaft
  • Combination flex provides multiple tip trim options

Trimming Instructions

Graftech Lite Graphite Iron Shafts is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from GREAT SHAFT !!! Great shaft and great value--works very well in component hybrids also.Very good shaft if you like to work the ball--nice feel.
Date published: 2014-10-18
Rated 5 out of 5 by from Graftech Shafts I have used this shaft in about 4 or 5 different sets of irons and have found it to be a great shaft--NO ISSUES--Excellent value
Date published: 2012-05-30
Rated 5 out of 5 by from Great performance and value I was looking for a mid Bend lower flighted shaft when I discovered this one excellent performance and a wonderful price senior Flex hits longer than regular Flex of other brands for me
Date published: 2017-09-07
Rated 5 out of 5 by from Graftech Shafts I have used this shaft in about 4 or 5 different sets of irons and have found it to be a great shaft--NO ISSUES--Excellent value
Date published: 2012-05-30
Rated 5 out of 5 by from perfect shaft used in a Caiman hybrid head Brilliant!!!!!!!!!
Date published: 2017-05-04
  • y_2017, m_11, d_24, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_GW1006, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Are work on taylormade blade iron

Asked by: Hip
Not likely. Most Taylor Made blade irons use a .355" taper tip shaft design. You can look to see if your Taylor Made irons use a .355" or .370" tip size shaft at this link on our web site. https://www.golfworks.com/images/art/TaylorMade.pdf
Answered by: JimY
Date published: 2017-10-23

To achieve in between flexes hard step or soft step,the code says .25” not .50”cuts for tip trimming 

Asked by: Lenny
The Graptech Lite is an R/S combination flex shaft so you could either add 1/2" to the recommended trimming for the R flex or subtract 1/2" from the recommended trimming instructions and you will end up with the same flex. 1/2" is equal to a half a flex with these shafts.
Answered by: JimY
Date published: 2017-10-10

fits on new M1 IRONS?

Asked by: jbmuña
Yes the Graftech Lite iron shafts will fit the new M1 irons.
Answered by: JimY
Date published: 2017-10-09

I have ping eye2 irons and would like to put a senior graphite shaft in the 1 iron. Online info says the tip is .355. But caliper measures .370 OD. Which is correct for shaft ordering?

Asked by: bassman52
All Ping Eye 2 irons were .355" tip size shafts from the factory. A .355" taper tip shaft will measure .370" where the shaft exits the top of the hosel. They taper out that quickly. A .355" taper tip shaft only measures .355" at the very tip of the shaft. It is possible that someone rebored this head to accept a .370" tip size shaft at some time.
Answered by: JimY
Date published: 2017-06-19

I'm looking to reshaft my mizuno 850 jpx irons with senior flex shafts. They have fujikura orochi graphite 70g reg shafts. Don't know tip or butt diameter or if parallel or taper tip. Can't find any specs on the internet. Can you recommend suitable shafts

Asked by: Don
We offer an OEM Shaft Replacement Guide on our website that includes the shaft tip and butt diameters - Here is the current Mizuno guide: https://www.golfworks.com/images/art/Mizuno.pdf The JPX 850 iron heads have a .355" tapered hosel. Unfortunately, there are not a lot of A flex graphite options but here are the two that we carry: https://www.golfworks.com/aerotech-steelfiber-70-cw-graphite-iron-shafts-355/p/AT0020IE/ https://www.golfworks.com/paderson-kinetixx-ts-i-355-graphite-iron-shafts/p/PK0105/
Answered by: Admin
Date published: 2017-05-03

Can I use this shaft with Calloway Diablo Edge irons with a bore through shaft?

Asked by: Donncha
Yes this shaft will fit the Diablo Edge bore through irons. I would recommend subtracting 1" from the recommended tip trimming instructions to maintain the flex of these shafts because they are being installed into a bore through iron design.
Answered by: JimY
Date published: 2017-04-10

Are the tips of these shafts compatible with Calloway X iron heads?  Do you include trimming instructions with the shafts?

Asked by: Dickb
Yes these will work with the Callaway X Series irons. Yes we include trimming instructions with the shafts and they are also at this link on our web site. https://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2017-04-03

What is the maximum length I can get for a Graftech Lite graphite shaft?

Asked by: Dan
The Graftech Lite iron shafts are 42" long raw length. That is the maximum length.
Answered by: JimY
Date published: 2017-03-07
  • y_2017, m_11, d_24, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_16
  • loc_en_US, sid_GW1006, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks