Graphite Design G-Tech Graphite Wood Shafts

Graphite Design G-Tech Graphite Wood Shafts

L/A Flex - 335 tip (69g) 1/2D3M
In Stock
R/S Flex - 335 tip (74g) 3/4B2M
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Graphite Design G-Tech Graphite Wood Shafts

The Graphite Design G-Tech graphite wood shaft has all the performance characteristics that today's golfer desires.

  • .335" tip diameter
  • Quality the world's best club makers have trusted for years
  • A distinguished look unique from the competition - Graphite Design engineering applied for golfers of all skill levels

Trimming Instructions

Graphite Design G-Tech Graphite Wood Shafts is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Have everything I need Customer loves the shaft, results are good. Service was speedy and the product lived up to its reputation.
Date published: 2015-06-16
Rated 5 out of 5 by from Great price and performs well. This is the first shaft I've had to replace. Didn't want to spend a lot and am pleased so far with the results. Played several rounds and no loss in clubs performance.
Date published: 2016-08-13
Rated 5 out of 5 by from Graphite shafts Every customer is more than satisfied with the G-tech shaft
Date published: 2016-07-01
  • y_2017, m_3, d_21, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_GD0011, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

do put the tips on for cobra adjustable shafts (3-4)

Asked by: CHUCK
Yes we can install the Cobra shaft adaptor on to the shaft. The cost for installing the shaft adaptor is $10.00.
Answered by: JimY
Date published: 2017-03-07

Would this be a good choice to leave at 47" playing length with a swing speed of 105? I want to try the heavier weight shaft also. Do you have a Cobra F-6 tip adapter? Thanks

Asked by: Big Dog
When you get to driver lengths at 47" you have to be willing to do some experimenting to see whether or not it will work for you. This shaft is an R/S combination flex shaft that would play more flexible then the R flex at 47". It would play more like a Senior flex at 47". We do still have some of the Aerotech Claymore LD shafts at 50" raw length that are designed to be used with longer length drivers. We do have the BB9079 shaft adapter for the Cobra F6 driver.
Answered by: JimY
Date published: 2016-12-22

I am replacing my graphite shafts in my irons, what is the correct length I need to cut them .i always heard graphite is 1/2 inch to 1 inch longer than steel ? 4 -pw and 50,54,58 wedges using GD Gtech shafts

Asked by: Rick3109
Really that depends on what lengths fit you the best and also what club manufactures clubs do you have. Some companies like Ping make their irons the same length with both steel and graphite shafts. Other make graphite shafts 1/2" longer then with steel shafts. Here is a link to our standard length chart. We make ours 1/2" longer with graphite shafts then steel shafts.
Answered by: JimY
Date published: 2016-12-08

What shaft would you recommend to replace a Yonex boron LTB600 shaft?

Asked by: Dennis
With all your individual questions asking which shaft compares best to the Yonex Boron LTB600 shaft this Project X (TT0115) would be the closest. The Yonex shaft was in the mid 80 to low 90 gram weight range. It was designed for a mid low to low trajectory. The GD0036 Graphite Design G Series 83 gram could be a good choice as well.
Answered by: JimY
Date published: 2016-10-10

Just wondering if i could get more  distance with a heavy shaft, my swing speed is 120. I feel as if the club never catches up to my body..plz help. Would a 75 gram shaft do the trick. ..Ty.

Asked by: Golfer Glen
With your swingspeed and if you have a quick tempo the heavier weight shaft can help you time and pace the shaft a little better. Your swingspeed also puts you into an X flex shaft. The G-Tech might not be the best choice for you. In Graphite Design the YS7+ in an X flex could be a good choice.
Answered by: JimY
Date published: 2016-03-22

I'm 15 been playing about 2 years and play for my high school. I play or practice 3-4 days a week, swing speed is in the low 80's, drive 185-200 and I am using a Taylor Made Burner 9.5 what would be a good shaft choice for me?

Asked by: wolfman13
The Graphite Design G-Tech could be a good choice. Another good shaft could be the Kuro Kage Black (MR0031). It is a little more expensive but a very good shaft.
Answered by: JimY
Date published: 2017-01-27

what it is the right shaft for a king cobra titanium 5 wood oversize head

Asked by: picolo
The original King Cobra titanium oversize wood heads used a .370" tip diameter wood shaft. There are no .370" tip diameter wood shafts available these days. You would have to shim the .335" tip diameter to fit this hosel bore. We use this Bushing Ferrule Adaptor for this installation. The outside diameter of stem on the Bushing ferrule adaptor has to be carefully sanded down from .400" to .370" to properly fit inside the Cobra hosel. The .335" shaft will fit correctly inside this adaptor.
Answered by: JimY
Date published: 2016-05-05

I have a swing speed off 103 but i get to much height is there a shaft with a high kick piont that you can recommend 

Asked by: Daza
  • y_2017, m_3, d_20, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_8
  • loc_en_US, sid_GD0011, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks