Graphite Design Tour AD MT Graphite Wood Shaft

Graphite Design Tour AD MT Graphite Wood Shaft

50 S Flex, 46" .335" (56.5gm) - 4B2M -
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Graphite Design Tour AD MT Graphite Wood Shaft

The Tour AD MT design is based on the very popular Tour AD DI model and utilizes the same Toray Company’s Nanomaterial or “DI Technology” in the tip section of the shaft. The Tour AD MT features a stiffer mid-section and slightly softer tip than the Tour AD DI. This design feature will produce optimal launch and spin characteristics in today’s low spin drivers. The new Tour AD MT provides a player with Maximum energy Transfer resulting in superior Accuracy and Distance.

Trimming Instructions

Graphite Design Tour AD MT Shaft Specifications

Graphite Design Tour AD MT Graphite Wood Shaft is rated 3.3 out of 5 by 3.
Rated 5 out of 5 by from Solid Shaft! Went to a local club fitter. There was so many shafts to choose from. I was fitted with Trackman and they recommended the GD DI-6 or the MT-6. I love the Porche looking yellow and went with that. HUGE difference from the stock shaft! Picked up about 15 to 20 yards on my drives! After a few rounds with some buddies and saw that I was out driving them, they now all have Graphic Design driver shafts!
Date published: 2015-06-30
Rated 1 out of 5 by from Over rated I'm an avid golfer w/ 30+ years, single digit handicap. Wanted 5+ yards from my Titleist Driver w/ Phenom shaft so purchased the GD MT-6 at $380.00, took to the range and was totaly disgusted, it was actually SHORTER in distance and worse in consistancy. My FIRST and LAST High Dollar Golf Shaft!
Date published: 2014-05-23
Rated 4 out of 5 by from Love my new Tour AD MT 5s shafts I hit two large Buckets today with the Taylormade M2 and I was amazed at the accuracy and good roll out to 275 yds . My first few were on the toe but I corrected that quite easily. It seemed like I could not hook the ball with this driver, which I did easily with my old r15 and the two other woods #3and 5 were very easy to hit off the turf, perfect balanced feel to them.
Date published: 2016-07-30
  • y_2017, m_3, d_21, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_GD0037, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Will an MT-5 Regular flex work as a 3-wood shaft. I'm trying to get a mid flight.

Asked by: john
Yes you would follow the trimming instructions for installing this shaft into a 3 wood, which for this shaft is a 1/2" tip trim for a 3 wood. It follows trim code W2 at this link from our web site. Scroll down to the last page.
Answered by: JimY
Date published: 2017-02-23

Want to install a tour AD MT 6s in a M2, It is my understanding Taylormade recommends tip trimming this set up 1". Can you confirm this?

Asked by: Par34
Anytime that we have talked to Taylor Made about making trimming instructions adjustments because of a shaft adapter they have told us they do not make any adjustments because of the shaft adapter. In looking at this shaft on Graphite Designs web site it recommends 0" tip trimming for a standard bore driver. The M2 is a standard bore driver. Graphite Design has made some shafts that were designed to be there listed flex in a bore through, such as the YS 6 & 7+ and in the case of those shafts you would need to trim 1" when installing into a standard bore. This is not the case with the Tour AD MT shaft.
Answered by: JimY
Date published: 2017-01-06

Does Graphite Design make a Senior Shaft for woods?

Asked by: Rocco
Yes Graphite Design makes a Senior flex. In the Tour AD shafts they use R2 to denote Senior flex.
Answered by: JimY
Date published: 2016-07-08

I have titleist 915 D3 drive this shaft ready to use it?

Asked by: navy
This shaft could be installed into the 915 D3 driver. It you are installing the shaft into the existing adaptor the shaft tip would have to be sanded and epoxied in and the shaft would have to be cut for the finished length of the driver. If you want us to install it into a new adaptor for the Titleist driver we can do that. You would need to order the shaft and the adaptor. We charge $10.00 to install the adaptor on the shaft. If you need us to cut the shaft to the finished length for the driver we can do that as well. We can also install the grip and you would need to order the grip as well.
Answered by: JimY
Date published: 2015-12-07

Are you able to tip this shaft to fit into a Ping G30?

Asked by: SuperDave
The Ping G30 uses a .335" tip diameter shaft which is what this shafts tip diameter is. For a driver there would be no recommended tip trimming for installation but if you would like some additional tip trimming done there is enough parallal tip length to do that.
Answered by: JimY
Date published: 2015-07-30

I'm ordering this shaft for a Taylor Made r-15. Any special preperation required?

Asked by: DanD
The Taylor Made R-15 does use a .350" tip diameter shaft. The R-15 TP uses a .335". You would need to shim this .335" shaft to fit the .350" adaptor for the R-15 or purchase the the R-15 TP adaptor and install it onto this shaft. The R-15 TP adaptor will fit the R-15 head. Right now we are backordered on the R-15 TP adaptors until mid August. Our SHIM15 would work well for shimming the .335" shaft into the .350" adaptor.
Answered by: JimY
Date published: 2017-01-27
  • y_2017, m_3, d_20, h_14CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_GD0037, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks