Graphite Shaft Extensions

Graphite Shaft Extensions


GSE - Graphite Shaft Extender .600
$1.99
In Stock
USGE - Ultralite Graphite Shaft Extender .600
$1.99
In Stock
Shaft Extension Adhesive - 30 ml. Syringe
$6.99
In Stock

Graphite Shaft Extensions

The GolfWorks offers graphite extensions for standard or ultralite shafts. These 3" extensions are made of injection-molded graphite for strength and durability. Choose the extender that fits your shaft. Can be sanded to fit most graphite shafts.

Graphite Shaft Extensions is rated 5.0 out of 5 by 10.
Rated 5 out of 5 by from Terrific fit! Needed to lengthen a short shaft and this product Worked like a champ----easy to install!
Date published: 2015-09-10
Rated 5 out of 5 by from Great product and easy to install. I use these often with the used clubs I purchased.
Date published: 2016-12-10
Rated 5 out of 5 by from Fits many shafts I always keep some of these around the shop. They need to be sanded to fit many different shafts, but when a customer wants it now... you don't need to wait for something to be shipped. There is no doubt buying the exact size is much easier. I just don't see any reason to keep that much inventory. If sanded correctly, there is plenty of thickness in this to hold up to two inches of extention.
Date published: 2016-11-23
Rated 5 out of 5 by from Aldila RIP Phenom Aldila RIP Phenom R flex is .600 I think? Any chance you could confirm this for me? Wanting to tip my shaft to stiffen it a little. Thank you!
Date published: 2016-03-15
Rated 5 out of 5 by from Excellent Product. Needed to add 1/2 inch to my Ping Hybrid. Worked perfectly. Fit solid. Thumbs up.
Date published: 2017-03-30
Rated 5 out of 5 by from Extensions The price was great service was great to will buy from again thanks manny mejia
Date published: 2016-07-23
Rated 5 out of 5 by from great price I bought these to lengthen my clubs and they were great. so easy to use
Date published: 2016-07-31
Rated 5 out of 5 by from Best equipment supplier ever! Products are the best; service excellent; prices fair
Date published: 2015-06-25
  • y_2018, m_1, d_21, h_10
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_10
  • loc_en_US, sid_GSE, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

which of these has the largest diameter of the end that goes into the shaft ?

Asked by: mike
The GSE has a diameter of .535" and the USGE has a diameter .480". These are the diameters that wold go into the shaft you are extending.
Answered by: GW2002
Date published: 2018-01-15

Looking to extend a kuro kage tini 70 x in my driver and a fujikura pro 70 in my 3w. Will these extensions work?

Asked by: Nickn
The Kuro Kage TiNi 70 X flex would use the GW4000 Green (.5225") code extension. We do not stock the Fujikura Pro 70 wood shaft so I do not know which extension it would take for sure. To get the correct extension size you need to measure the inside diameter of the shaft at the butt end of the shaft. Match that measurement to the GW4000 extension that is the same or the closest. I see the Pro 70 was used by Taylor Made and may have been made exclusively for Taylor Made. I do not know what the butt diameter of this shaft would be. If it is a .600" or .605" butt diameter it could likely also use the GW4000 Green based on the shaft weight.
Answered by: JimY
Date published: 2018-01-05

I have ping I25 irons with stock Ping TFC 189 graphite shafts...what extenders do I need to order for the set?

Asked by: matt
To know the correct graphite extension size you need to measure the inside diameter of the shaft at the butt end of the shaft and match that size to the size of the GW4000 or GSE extension size. We do not have this measurement for the Ping TFC 189 graphite iron shafts. Depending on which shaft flex you have the shaft weights are listed from 70 to 86 grams from the SR to S flex. The shaft weight will effect the ID measurement and they would used different extensions. If you have the R flex you would likely need the GSE or GW4000 Red extension based on the weight and butt diameter. This is just an educated guess based from other shafts in that weight range and shaft butt diameter that we have measured.
Answered by: JimY
Date published: 2018-01-02

I want to extend my Aldila VS Proto-T 75 R graphite shafts on Titleist irons. What size do I need to order? Thanks.

Asked by: DMC
To get the correct size graphite extension you will need to measure the inside diameter of the shaft at the butt end of the shaft and then match that measurement to the correct extension size (GW4000). We do not have this measurement from the Aldila VS-Proto T 75 graphite iron shafts. https://www.golfworks.com/premium-graphite-shaft-extensions/p/GW4000/
Answered by: JimY
Date published: 2017-12-27

Will the "regular" (.580/ graphite iron) extensions be available again? ETA?

Asked by: SEAgolfer
The GSE extension, which is the one that says "Regular" are in stock now.
Answered by: JimY
Date published: 2017-12-18

how many inches can they add

Asked by: jfire44
The graphite extensions are 3" long.
Answered by: JimY
Date published: 2017-12-14

I RESEIVEDSHAFT EXTENSIONS NO.GW4000.THEY ARE TOOLARGE FOR MY SHAFTS CAN i RETURN THEM FOR A SMALLER SIZE? GOLFBUDDY

Asked by: GOLFBUDDY
Yes, you will need to call Customer Service at 1-800-848-8358 and they can help you with this return.
Answered by: JimY
Date published: 2017-11-16

want to extend some cobra max irons what is the proper fit for these clubs

Asked by: ron
To get the proper graphite shaft extension you will have to measure the inside diameter of the shaft in your Cobra Max irons at the butt end of the shaft. You match that measurement to the correct size GW4000 extension. We do not have the inside diameter measurements for the Cobra shafts. You can also purchase the GW4000G to measure for the correct size extension. https://www.golfworks.com/premium-extension-gauge/p/GW4000G/ https://www.golfworks.com/premium-graphite-shaft-extensions/p/GW4000/
Answered by: JimY
Date published: 2017-11-15
  • y_2018, m_1, d_21, h_10CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_127
  • loc_en_US, sid_GSE, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks