Guerin Tour Spec Black Series Blade Putter

Guerin Tour Spec Black Series Blade Putter

Guerin TS Black Series Blade Putter - 34" -
In Stock
Guerin TS Black Series Blade Putter - 35" -
In Stock

Guerin Tour Spec Black Series Blade Putter

Master Milling

Designer Guerin Rife is introducing a new level of precision never before seen on a putter. He calls it “Master Milling.” This new proprietary machining process is so complete that the raw milled putter head does not require any grinding or polishing in the finishing process. Each putter is 100% CNC milled from a forging of the highest quality S18C mild carbon steel that produces a pure yet soft vibration to the hands.

One look at a Guerin putter, its intricate master milling, and the incredible attention to detail, you instantly know that you are holding something very special in your hands.

Tour Specified Weighting – Each putter is precision milled to a tour standard specified swing weight to accommodate the shaft length. Virtually every manufacturer produces putters with the same head weight then simply offers that head with different length shafts. While that may be convenient and cost effective for the manufacturer the different shaft lengths create very different swing weights. This means the shorter putters will be too light and the longer putters too heavy. Tour Spec solves that problem by milling the heads to a weight that compliments the shaft length.

The Wavy Grooves – The technical name for our face grooves is “VSE” which stands for variable surface engaging. The wavy pattern of the grooves is an improvement over straight grooves because there is more groove touching the ball (more groove “engaging” the surface). Also this wavy up and down pattern better conforms to the uneven dimpled surface of a golf ball. This provides a 50% straighter roll on off-center hits. And grooves grip and lift the ball at impact producing an immediate forward roll that doesn’t skip and skid like standard putters. Who better to improve on putter groove technology other than the man that invented them, Guerin Rife.

The “RockerSole” – Golfers position their hands differently due to one of their eyes being stronger than the other. 85% of golfers are right eye dominant. This means that they will position their hands under their right eye at address thinking the shaft is at 90 degrees when in fact it is leaning back away from the ball one or two degrees. This causes the back edge of the putter to engage the ground and forces the toe to turn in, or “hook”. This causes the golfer to constantly adjust the putter head while trying to set up to the target line. The RockerSole allows the putter to sit square to the target line regardless of hand position. The putter face always stays square.

About Guerin Rife:

Guerin Rife has been designing putters for 20 years starting with the very first cavity mallet which he patented in the early 90’s. Best known for creating the famous TwoBar putter, he has designed over 40 putter models used to win over 100 tournaments worldwide on all professional tours. He is also the inventor of face groove technology and founded the Rife Putter Company in 2000.

Mr. Rife has now introduced his first super-premium line of putters under his first name Guerin Putters.

His new Guerin line is manufactured in very limited quantities and will maintain the highest standards for custom milled putters. While other companies make one putter for PGA Tour players and sell a cheaper mass produced putter to the golf consumer, anyone owning a Guerin Design putter will have the very same putter used by the best players in the world to earn their living.

Guerin Tour Spec Putters

Guerin Tour Spec Black Series Blade Putter is rated 5.0 out of 5 by 2.
Rated 5 out of 5 by from WOW.....Sweetest putter ....Period! I have played Scotty Cameron, Yes, Bobby Grace, Bettinardi, etc. and these Guerin Selects are by far the best feeling & most accurate putter I have ever played. With the new WAVY face lines the ball just rolls of the face and off center strikes are very forgiving. Wish I had one of these 10 years ago. This one is in my bag forever!
Date published: 2014-10-06
Rated 5 out of 5 by from Best Putter, incredible feel, sound and roll Purchased this putter 2 months ago, any of my friends that have put their hands on it, want it. Beautifully milled and balanced. The grip is amazing, I have even swapped out a few of my older putters to a Guerin Grip. Stack this up to any of the other high end makers.
Date published: 2014-08-29
  • y_2017, m_11, d_19, h_1
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_2
  • loc_en_US, sid_GR2010A, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

can i get this putter bent to 67 degrees and 2 degrees of loft direct through you? do you have the 370 gram head?

Asked by: scott
You would need to contact our Customer Service Department and they will help you with this order. Yes we can adjust the lie to 67 degrees, the loft to 2 degrees and there is a 370 gram head weight head for this model. You can contact Customer Service at 1-800-848-8358 or by email at
Answered by: JimY
Date published: 2016-04-06

Could you put a white dot or line on the top of the putter for an extra alignment aid for me ?

Asked by: Patch 53
We could put an alignment line on the top. You could request this when you place your order. It might be best to call in your order and Customer Service will help you and be able to tell you the cost. 1-800-848-8358
Answered by: JimY
Date published: 2015-10-20

What is lie angle 

Asked by: Jjcameron67
The lie angle is 71 degrees.
Answered by: JimY
Date published: 2015-09-04

Is tje 370 gram head 33 inch versiom available? 

Asked by: Cam75
We do not have them set up at 33" but we certainly can do one for you that way. If you order on line put a note in the Notes Box that you would like it assembled to 33" with a 370 gram weight head. If you call in the order just tell them you would like it assembled to these specification and they will write it up that way.
Answered by: JimY
Date published: 2015-11-06

Can this potter be made to 36 inches long?

Asked by: Dormie
Yes, we can customize any of the Guerin putters to whatever length you require.
Answered by: GW2002
Date published: 2015-04-22
  • y_2017, m_11, d_19, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_5
  • loc_en_US, sid_GR2010A, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks