High Density Tungsten Powder

High Density Tungsten Powder


High Density Tungsten Powder - 1/4 lb.
$22.99
In Stock

High Density Tungsten Powder

A safe, economical alternative to lead powder, The GolfWorks tungsten powder is now available in std. density which is similar to that of lead powder and also in 99% pure high density Tungsten Powder which is over 30% heavier than the highest density lead powder and due to the powdery textures ability for compression, can add more weight in less space.

High Density Tungsten Powder is rated 5.0 out of 5 by 7.
Rated 5 out of 5 by from Tungsten Powder Excellent stuff. Higher weight per volume than lead and safer too. Easy to work with when you pour down the shaft using a funnel and the grip saver tool. Comes with a nifty measuring spoon as well to make it easy. I swing weighted my set of Beryllium Copper Ping Eye 2's from C8 to D2 . This quarter pound container only got me through 4 clubs. Get the larger size if you intend to do your whole set.
Date published: 2015-10-02
Rated 5 out of 5 by from Just what you need This product is just what you think it is and it works flawlessly. It will not tack as much room as one might think, it is very heavy for the room it requires, perfect....Thanks.
Date published: 2016-09-25
Rated 5 out of 5 by from Great product, a must for swingweighting Great tungsten tip weights, pliable, and can cut the stem to lighter weights if needed. I would buy more, but the price of tungsten is expensive. Thanks!
Date published: 2016-11-22
Rated 5 out of 5 by from Works great. This is much better than lead powder or weights. Easy to use. There is enough in the jar for many sets of clubs.
Date published: 2015-09-26
Rated 5 out of 5 by from Great Product! I love this tungsten powder product, because I can more weight with so little amount.
Date published: 2015-06-07
Rated 5 out of 5 by from stuff works Works well a little bit goes a long way. Became full when opening the first time.
Date published: 2015-07-08
Rated 5 out of 5 by from Must have This is a must-have for swing weighting golf clubs
Date published: 2016-03-15
  • y_2017, m_10, d_15, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_HDTP, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Without knowing other methods before, I simply added tungsten powder to the epoxy mix during club head assembly.  Will the powder weaken the epoxy strength and cause shaft breakage ?   Do I need to remove the club head for re-assembly? 

Asked by: Daniel M
If you added to much Tungsten powder with the epoxy it could possibly effect the strength of the epoxy bond. Most clubmaker's put the powder down the inside of the shaft and then secure it in place using a cork. https://www.golfworks.com/swingweight-shaft-corks/p/CI/ https://www.golfworks.com/clubmaker-48-heating-ram-rod/p/GM1510/
Answered by: JimY
Date published: 2017-08-17

The corks are too wide for a graphite shaft. Is there another means to keep the powder secure at the tip end of the shaft?

Asked by: gcpt
We do not have any smaller corks or anything else to secure the powder into the shaft. When I have had to use this method in the past I would use a utility blade and cut the corks down to a smaller size to fit down into the graphite shaft and put a little epoxy on the cork to help it go down into the shaft a little easier.
Answered by: JimY
Date published: 2017-09-18

This comes with a small spoon to measure with. How much does one spoonful weigh in grams?

Asked by: Kpt
Thank you. Was that 2g a heaping spoonful, or one that's is planed off on top?
Answered by: KPT
Date published: 2017-06-12

How much does this item weigh? Thanks.

Asked by: Paul Burkhardt
Read the label jimmy....it's 1/4 lb. 
Answered by: Eagle
Date published: 2017-02-16

How many grams equal 1 Swingweight?

Asked by: TJ Honus
Approximately 2 grams of tungsten powder will equate to 1 swingweight point depending one where it is inserted in the shaft.
Answered by: Admin
Date published: 2016-07-29

What do you do to keep the powder from moving when the club head is up in the bag?

Asked by: Craiger
If you are putting powder down inside the shaft we hold it in place with a cork that if forced down inside the shaft on top of the powder. http://www.golfworks.com/swingweight-shaft-corks/p/CI/ http://www.golfworks.com/the-golfworks-44-1-2-ram-rod/p/RR/ http://www.golfworks.com/heavy-duty-44-1-2-ram-rod/p/RR7/
Answered by: JimY
Date published: 2016-07-18

When pouring tungsten powder down the shaft to adjust swing weight, is the change in CG enough to change the MPF significantly?

Asked by: CHS
It depends on how much weight you are adding. Weight added inside the shaft that extends above the top of the hosel begins to significantly change the clubs CG. Weight that stays below the top of hosel will not effect CG that much assuming a normal length hosel.
Answered by: JimY
Date published: 2016-06-20

Can you tell me the particle size. It is usually given in micrometers.

Asked by: DavidL
Our vendor tells me the particle size is approximately 5 to 7.5 micrometers.
Answered by: JimY
Date published: 2016-02-03
  • y_2017, m_10, d_15, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_HDTP, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks