Hosel Honing Wire Brush

Hosel Honing Wire Brush

Bit for Irons
In Stock
Bit for Woods
In Stock

Hosel Honing Wire Brush

The easiest way to clean out hosels. For use with all drills. Cleans out hosels quickly and easily and prepares them for re-assembly. We recommend that the hosel be cleaned out using a cotton swab dampened with solvent after use.

Hosel Honing Drill Bits for Woods and Irons is rated 4.7 out of 5 by 13.
Rated 5 out of 5 by from Reshafting made easy!!! As a novice club builder, I was concerned about fully cleaning the side walls and deep into the hosel, so I tried these years ago and have never looked back. Attaches easily to any drill, so the speed and depth can be controlled for unmatched hosel cleaning. Really scratches up the side walls so that you feel confident about the epoxy bond for any of your reshafting jobs.
Date published: 2015-09-24
Rated 5 out of 5 by from Essential Club Building Tool. I bought two of these hosel honing brushes for reshafting jobs. I recently pulled shafts from a set of irons and used a brush to remove epoxy residue. It does a great job of cleaning the inside of the hosel to prepare for reshafting. I don't know about durability yet since I have only done the one job but the brush held up well to a fair amount of use. Recommended.
Date published: 2016-06-13
Rated 4 out of 5 by from Nice Have used these for a couple years. They work well at getting old adhesive out after pulling shafts. These things don't last "forever" so I try to keep a couple new ones on hand. Very nice tool.
Date published: 2016-08-06
Rated 4 out of 5 by from Hosel Honing Wire Brush Does exactly what is described and with good results. My only recommendation is to put wire bristles at the tip of the tool to get at the bottom of the hosel with better results.
Date published: 2015-12-05
Rated 5 out of 5 by from Works Great! Just finished an MOI build on a set of STi Irons - used the hosel brush to clean out the hosels - worked great and saved time having to deal with the sandpaper strips.
Date published: 2016-07-25
Rated 5 out of 5 by from Great items It was a pleasure doing business with you one of my items was broke, called GW and a replacement was sent out ASAP had it the next day excellent!
Date published: 2015-08-14
Rated 5 out of 5 by from great tool... It works perfect for what I need to do in cleaning out pulled heads.
Date published: 2017-01-04
Rated 5 out of 5 by from Hosel brush It worked great until I forced too many "Gs" on it, and I snapped it. I'm known for breaking stuff. Good brush.
Date published: 2017-03-11
  • y_2017, m_6, d_21, h_3
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_13
  • loc_en_US, sid_GW1060, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What are the exact O.D of the two brushes?  Are the brushes stainless steel or steel?

Asked by: Insidetheleather
The iron Brush measures approximately .420" and the Wood Brush approximately .340". They are stainless steel.
Answered by: JimY
Date published: 2017-06-07

Which brush is wider the iron or woods one.

Asked by: Jimbo
The iron brush wold be the wider one. Designed for .355-.370 hosel bores, where the wood brush is designed to work in .335-.350 hosel bores.
Answered by: GW2002
Date published: 2017-03-31

will the wood bit work for irons since it's smaller in diameter and still fit in? i currently see the iron bit as backordered.

Asked by: andy15
Yes this wood bit will still work just fine in an iron.
Answered by: JimY
Date published: 2017-02-09

What is the difference in the brush for irons and the brush for woods? What are the respective diameters?

Asked by: Mike
The brush for the Woods is sized for a .335" hosel bore and the irons for a .355" or .370" hosel bore iron.
Answered by: JimY
Date published: 2017-01-22

Will this product clean out pieces of old shat that broke off.

Asked by: David
No these brushes will not clean out pieces of broken steel shafts. They can help clean out pieces of broken graphite shafts. If you have a broken steel shaft you will need to use a Broken Steel Shaft Extractor first to remove the shaft then use the brush to clean out any remaining epoxy. http://www.golfworks.com/true-temper-belly-long-putter-shafts/p/SKP/ http://www.golfworks.com/fast-extract-universal-handle/p/GW1108/
Answered by: JimY
Date published: 2016-08-01

Are the bristles stainless steel, carbon steel, etc?

Asked by: Insidetheleather
Stainless Steel.
Answered by: JimY
Date published: 2017-01-13

Can you use this product to clean out the epoxy inside a taper tip steel shaft?

Asked by: mjr
No these will not fit inside the tip of a steel shaft. I personally use a drill bit to clean out epoxy from inside the tip of a steel shaft.
Answered by: JimY
Date published: 2017-01-13

When will the bit for Irons be shipped out if backordered?

Asked by: Ricky
We have them in stock here in the US so I would think Canada should have them shortly. To be sure it would be best to contact GolfWorks Canada and they will be able to help you.
Answered by: JimY
Date published: 2017-01-13
  • y_2017, m_6, d_17, h_12CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_12
  • loc_en_US, sid_GW1060, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks