KBS Hybrid Steel Hybrid Shafts

KBS Hybrid Steel Hybrid Shafts


R Flex - 370 tip (100g) 3B2H
$29.95
In Stock
S Flex - 370 tip (105g) 4B1H
$29.95
In Stock
X Flex - 370 tip (110g) 5C1H
$29.95
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

KBS Hybrid Steel Hybrid Shafts

KBS Steel Hybrid Shafts are ideal for today's high performing hybrid club heads.

Features:
  • .370" tip diameter
  • Features a gradual stepless taper starting at the anchor location (between the hands) and continuing to the tip just above the hosel

Trimming Instructions

KBS Trimming Instructions

KBS Hybrid Steel Hybrid Shafts is rated 5.0 out of 5 by 3.
Rated 5 out of 5 by from Very Good Shaft Very smooth shaft Says it is low launch but this is the opposite mid to high and lands soft only downfall was wish there were more in between flexs like the .370 tour steel shafts basically more tip trimming information For the extra cash this is a good shaft though, but you need better tip trimming info.
Date published: 2011-03-21
Rated 5 out of 5 by from Very Good Shaft Very smooth shaft Says it is low launch but this is the opposite mid to high and lands soft only downfall was wish there were more in between flexs like the .370 tour steel shafts basically more tip trimming information For the extra cash this is a good shaft though, but you need better tip trimming info.
Date published: 2011-03-21
Rated 5 out of 5 by from Great Graphite Alternative Reshafted my Adams 9031 hybrids with these and am quite pleased. As a previous poster stated, smooth and soft landings. I play regular in graphite, and tip-trimmed these one club softer than KBS recommendations. Couldn't be happier. Nice looking, too.
Date published: 2016-11-29
  • y_2017, m_10, d_17, h_20
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_3
  • loc_en_US, sid_FS0020, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Hi  I have Adams idea pro blacks 9031 3h (20*) and 4 (23*). What would I tip trim for it to play stiff and should I have the playing length 0.5" shorter than it was with the graphite shaft? Thanks!

Asked by: mjroma
For a 20 degree hybrid KBS recommends tip trimming 1.5" and for the 23 degree you would tip trim 2". It is pretty normal that if you are changing shafts from graphite to steel you would need to shorten the clubs by 1/2" to maintain a similar swingweight. I always say if I am not sure I will initially cut them longer because it is easier to make them shorter then it is to make them longer if I do not like them.
Answered by: JimY
Date published: 2017-09-18

1. RESHAFT 3 HYBRIDS- a. ADAM IDEATECH V3 16 DEG, 42" b. X2 HOT 19 DEG,40.5" c. X2 HOT 22 DEG, 39.75".. 2. I WANT TO CHANGE OVER TO STIFF FLEX. SUGGEST BETWEEN MALTBY MPF OR KBS HYB OR UST MAMIYA OR ALDILA RIP OR NVS OR PROTO OR NV.

Asked by: UPENDRA
It would help us to make a more specific recommendation for you if you told us what you want this shaft to do for you. Are you looking for a higher, mid or lower trajectory etc. At the links for each of these shafts if you scroll down the page you will see the specifications for each shaft listed for making comparisons.
Answered by: JimY
Date published: 2017-08-21

Can this be used in ping g30 hybrid

Asked by: Player
No, the Ping G30 hybrid uses a .355" taper tip shaft and the KBS Hybrid steel shaft is only available in a .370" tip size. You could use a KBS .355" taper tip iron shaft in the Ping G30 hybrid.
Answered by: JimY
Date published: 2017-08-14

Can this be put in a Ping i25 26 degree hybrid and if so what should the length be?

Asked by: Inquisitive Amateur
No, the KBS Steel Hybrid shaft will not fit the Ping i25 hybrid. Ping uses .355" taper tip shafts in their hybrids. We do not stock any .355" taper tip hybrid shafts. You would have to use a .355" taper tip iron shaft for this hybrid. In a .355" taper tip shaft you would purchase the 5 iron shaft for this hybrid. The finished length would be in the 38.50" to 38.75" range.
Answered by: JimY
Date published: 2017-07-31

I just received this shaft stiff flex. No information about tip trimming. Cant find any codes

Asked by: Brad
You follow trim code IR32. Here is the link for the trimming instructions. IR32 will be on the second page. https://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2017-07-18

what lenght would I cut the shaft to fit into a callaway FT hybrid  4h ....26 degree

Asked by: TTT
Callaway listed the FT Hybrid 4h as 39.75" with a graphite shaft and generally they would make a steel shaft 1/2" shorter. So 39.25" should work with the KBS Hybrid Steel shaft.
Answered by: JimY
Date published: 2017-06-27

Would this shaft fit the Taylormade M2 hybrid?

Asked by: Ricardo
Yes the KBS Steel Hybrid shaft will fit the M2 hybrid.
Answered by: JimY
Date published: 2017-03-09

Will this shaft fit into a Titleist 915 hybrid ?

Asked by: Donald
Yes the KBS steel hybrid shaft will fit the Titleist 915 Hybrid.
Answered by: JimY
Date published: 2017-03-06
  • y_2017, m_10, d_17, h_20CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_17
  • loc_en_US, sid_FS0020, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks