KBS Tour Chrome .355" Wedge Shaft

KBS Tour Chrome .355" Wedge Shaft

Chrome, R Flex - 37.0" - 355" tip (110g) 3B2H -
In Stock
Chrome, S Flex - 37.0" - 355" tip (120g) 4B1H -
In Stock
Chrome, X Flex - 37.0" - 355" tip (130g) 5C1H -
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

We Also Recommend

KBS Tour Chrome .355" Wedge Shaft

  • Designed to produce additional backspin and control on wedge shots.
  • Durable chrome finish
  • Step pattern and wall thickness maximizes energy transfer for better feel and distance control.
  • .355" Taper Only

Trimming Instructions

KBS Trimming Instructions

KBS Tour Wedge Shaft Specifications

KBS Tour Chrome Wedge Shaft is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from quality feel just installed the 130g into my 48 vokey (gap) wedge...and yes, its every bit as good as it sounds :)
Date published: 2014-09-06
Rated 5 out of 5 by from This is a great wedge shaft. I would recommend it I bought this shaft and other iron shafts in the past and glad I did its,has been a great shaft.
Date published: 2016-11-16
Rated 5 out of 5 by from Very good shaft Put these in play in my wedges. A little lighter than the old shafts with consistent flight
Date published: 2017-07-13
Rated 5 out of 5 by from Best golf shafts!!! Great shafts!! I put them in new every year I get my new wedges!!!
Date published: 2017-02-26
  • y_2018, m_1, d_20, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_FS0034, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Recently installed the KBS $-Taper (130g-X) shaft in my irons and wanted to get advice on which KBS shaft to go with in my wedges. I hit full and partial shots with my 52/56 degree wedges. My 60 degree is my all-around wedge, greenside, and bunker wedge.

Asked by: Nittanypsu24
You might use the KBS Tour and drop to the S flex for a little more feel especially in the 60 degree wedge. The Tour Chrome is designed to have the same feel as the KBS Tour. If you are looking for a lower more penetrating ball flight the KBS 610 Wedge (FS0040) works well. The Hi Rev 2.0 Wedge is designed for more spin and would be a little more similar to the KBS Tour.
Answered by: JimY
Date published: 2017-12-11

Hello isn't the KBS tour chrome wedge shaft the same has the KBS Tour iron shaft. Thank you

Asked by: oneputt
The Tour Chrome wedge shaft has a 5.5" tip to first step measurement and the KBS Tour iron wedge shaft has a 6" tip to first step measurement. The Tour Chrome Wedge should play a little stiffer then the stock KBS Tour wedge shaft.
Answered by: JimY
Date published: 2017-10-30

I want to reshaft by Vokey SM6 sand and lob wedge. My Iron shafts are KBS tour 110 4.5 Reg flex and my gap wedge is 4.7. Suggestions?

Asked by: walleyedr
The Tour Chrome Wedge (FS0034) in the R flex matches in weight and playing characteristics and should match up well in flex and will work in the Vokey SM6 wedges.
Answered by: JimY
Date published: 2017-06-14

I have a Top Flite Tour Wedge (black finish from Dicks Sporting Goods) and I'm looking to put this KBS in it, but I don't know what size shaft would fit it. Are you all able to get this info?

Asked by: Josh27
The Top Flite wedges are a .370" parallel hosel bore. If you are wanting to install a .355" taper tip KBS shaft our SHIMT (.355" - .370") shim works very well for this assembly.
Answered by: JimY
Date published: 2017-06-14

 Please help me with the specifications to replace the KBS steel shaft in my Taylormade EF 58° wedge stiff flex Please Tip or Butt?

Asked by: Greg B
The Taylor Made EF wedges use a .355" taper tip shaft and the KBS Tour Wedge shaft that is stock is a .600" butt diameter. You can scroll down the page to the specification box at this link to see the shaft specifications. http://www.golfworks.com/kbs-tour-chrome-wedge-shaft/p/FS0034/
Answered by: JimY
Date published: 2017-06-14

how come there are no wedge shafts in .370 tip diameter there are many wedges that are not .355 and the wedges you have are all .370 also

Asked by: trajab59
A good question, and it really falls more to the manufacturers of the shafts choosing to make wedge offerings in a .355. It is no problem to use a .355 in a .370 hosel ( I do in my wedges). I used the SHIMT shim made to use on a .355 tip shaft installed into a .370 hosel. The reason most of the wedge shafts are .355 is that the .355 will work in both a .355 and a .370. A .370 will only work in a .370, unless you drill out the head.
Answered by: GW2002
Date published: 2016-03-18

Looking at new shafts for my wedges which are standard. My Irons which I have been fitted to are 1 inch long 1 degree upright. Any suggestions on length and lie adjustments. 2nd kid coming soon, money is tight.

Asked by: TBONE
If your wedges are currently a standard lie angle making them 1" longer would make them play like they are 2 degrees more upright. If you make the wedges 1" longer you will also make the play 6 swingweights heavier which can also make the shafts play a little more flexible which can also effect how the lie angle plays. They may not play quite like 2 degrees upright. I would get the lengths set up first and see how your directional control is before I make any lie adjustments. The KBS Tour Chrome wedges shafts could work well.
Answered by: JimY
Date published: 2016-03-10

My Taylormade wedge had a .370, yet all of your steel shafts are .355. Do you have any recommendations?

Asked by: DavidDDS
You can Shim the .355" tip diameter shaft to fit the .370" hosel bore. Our SHIMT is designed for this purpose and works very well. http://www.golfworks.com/product.asp_Q_pn_E_SHIM
Answered by: JimY
Date published: 2017-06-14
  • y_2018, m_1, d_20, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_10
  • loc_en_US, sid_FS0034, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks