KBS Tour .355" Steel Iron Shafts

KBS Tour .355" Steel Iron Shafts


R Flex - #2 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #3 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #4 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #5 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #6 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #7 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #8 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #9,W - 355 tip 3B2H
$26.95
In Stock
R+ Flex - #2 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #3 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #4 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #5 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #6 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #7 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #8 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #9,W - 355 tip 3.5B2H
$26.95
In Stock
S Flex - #2 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #3 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #4 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #5 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #6 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #7 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #8 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #9,W - 355 tip 4B1H
$26.95
In Stock
S+ Flex - #2 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #3 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #4 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #5 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #6 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #7 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #8 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #9,W - 355 tip 4.5B1H
$26.95
In Stock
X Flex - #2 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #3 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #4 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #5 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #6 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #7 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #8 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #9,W - 355 tip 5C1H
$26.95
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

KBS Tour .355" Steel Iron Shafts

The KBS Tour Taper Tip steel iron shaft was designed with moment of inertia analysis to increase stability from grip to club head to enhance the results of well executed swings.

Features:
  • .355" tip diameter
  • Proportional mass and radius reduction during step progression increases overall performance
  • Available in half inch increments 41.5" - 37.5"

Trimming Instructions

KBS Trimming Instructions

Not Found.

Would like to order these shafts 4-PW for Titleist AP2 710s precut to +1/2 inch. Is the make and model of my irons enough information for my order details for you to cut these to my desired length?

Asked by: ap2710
Yes we can do this for you and knowing the make and model is the information we need.
Answered by: JimY
Date published: 2017-05-15

If theKBS Shaft is taper tipped, does that mean there is no requirement to trim the tips? It is my understanding that I would install the coorespondign shaft into the correct head and trim to length. I am replacing PXi 6.0 with KBS Tour R+ from the PW-5

Asked by: Cal
That is right. You never tip trim a taper tip shaft. You install the corresponding shafts and butt cut to your finished length.
Answered by: JimY
Date published: 2017-04-18

I m thinking to buy AP1 716 iron and thinking of KBS shaft. My handicap is around 7. My current 8 iron with KBS tour can go 145 yrds. Any tips for the shaft.

Asked by: Zaw
If you are comfortable with the KBS Tour they could also work with the AP1 716 irons. The KBS Tour 105 (FS0041) could be a lighter weight choice and is being used by some of the manufactures. The feedback on this shaft has been very good.
Answered by: JimY
Date published: 2017-04-10

i have the taylormade psi irons. Which tip will i need in order for those to fit? Thanks

Asked by: sd1010
The PSi Taylor Made irons use a .370" parallel tip shaft or the FS0019 KBS Tour shafts. The PSi Tour irons use a .355" taper tip shaft.
Answered by: JimY
Date published: 2017-04-03

please confirm that the .355 tapered shaft (KBS Tour) will fit into Titleist AP2 710 heads - thanks

Asked by: Gary
Yes the Titleist AP2 710 irons use a .355" taper tip shaft.
Answered by: JimY
Date published: 2017-03-01

I use 5.5 rifles in my ping eye 3 OS. Will these work?

Asked by: Peter Malone
Yes the KBS Tour .355" taper tip shaft (FS0018) will fit the Ping Eye 3 OS irons. Ping irons use a .355" taper tip shaft.
Answered by: JimY
Date published: 2017-02-13

what would be a better shaft for me, I am 78 years old and golf 3 time a week,, regular shaft or senior shaft.

Asked by: Robert
Just based on the information you provided, I would recommend the A flex. Flex is generally based on clubhead speed and tempo, but without knowing your speed, we can only guess what flex might work best.
Answered by: GW2002
Date published: 2017-02-13

Im playing Ap2's with DG300S. I'm 57 and I hit an 8 iron about 135, and am looking for a more boring flight, narrower dispersion and of course more distance!. What would you suggest?

Asked by: Birdie
In the KBS shafts I would tell you to look at shafts like the C-Taper (FS0026) and Tour V (FS0036). The C-Taper is the KBS shaft that is designed to produce the lowest trajectory. The Tour V is a lighter weight shaft that they say is designed with a more stable tip section for tighter shot dispersion. It is designed to produce a mid trajectory. At these links if you scroll down the page you will see the shaft descriptions and specifications. https://www.golfworks.com/kbs-tour-c-taper-steel-iron-shafts/p/FS0026/ https://www.golfworks.com/kbs-tour-v-steel-iron-shafts/p/FS0036/
Answered by: JimY
Date published: 2017-02-09
  • y_2017, m_5, d_23, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_34
  • loc_en_US, sid_FS0018, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks