KBS Tour .355" Steel Iron Shafts

KBS Tour .355" Steel Iron Shafts


R Flex - #2 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #3 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #4 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #5 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #6 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #7 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #8 Iron - 355 tip 3B2H
$26.95
In Stock
R Flex - #9,W - 355 tip 3B2H
$26.95
In Stock
R+ Flex - #2 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #3 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #4 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #5 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #6 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #7 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #8 Iron - 355 tip 3.5B2H
$26.95
In Stock
R+ Flex - #9,W - 355 tip 3.5B2H
$26.95
In Stock
S Flex - #2 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #3 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #4 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #5 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #6 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #7 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #8 Iron - 355 tip 4B1H
$26.95
In Stock
S Flex - #9,W - 355 tip 4B1H
$26.95
In Stock
S+ Flex - #2 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #3 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #4 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #5 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #6 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #7 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #8 Iron - 355 tip 4.5B1H
$26.95
In Stock
S+ Flex - #9,W - 355 tip 4.5B1H
$26.95
In Stock
X Flex - #2 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #3 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #4 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #5 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #6 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #7 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #8 Iron - 355 tip 5C1H
$26.95
In Stock
X Flex - #9,W - 355 tip 5C1H
$26.95
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

KBS Tour .355" Steel Iron Shafts

The KBS Tour Taper Tip steel iron shaft was designed with moment of inertia analysis to increase stability from grip to club head to enhance the results of well executed swings.

Features:
  • .355" tip diameter
  • Proportional mass and radius reduction during step progression increases overall performance
  • Available in half inch increments 41.5" - 37.5"

Trimming Instructions

KBS Trimming Instructions

KBS Tour Taper Tip Steel Iron Shafts is rated 4.9 out of 5 by 12.
Rated 5 out of 5 by from Ping like a surgeon I visited Tampa Golf in search on new clubs and have since spent countless hours hitting club after club. After picking the Ping i10 irons, shafts became the next item to pick. With my swing speed being 105+, the Ping offerings fell short of my needs. "Snap" mocked up a 6 iron with the KBS Tour X-Flex shaft and it was a match made in heaven. With this shaft, not only can you hear and FEEL impact, the shot consistency was amazing. The problem with most X-Flex shafts is the extreme rigid feel they have at impact, but not the KBS. I actually had to have him check to make sure it was not a mislabeled shaft as it felt so smooth and fluid from start to finish in my swing. Needless to say, performance on these went unmatched with my fitting experience! Great work KBS!!!!
Date published: 2009-04-23
Rated 5 out of 5 by from KBS TOUR SHAFT I put KBS tour stiff .355 tapered shafts in Titleist AP2's and absolutly love them! I play to a 3 handicap from a course here with a Donald Ross designed greens that plays up to 7,000 yards. I play in individual stroke play tournaments against some of the best players in the area. The shot dispersion is very tight with these shafts, there seems to be a type of correction in the shaft that keeps the ball flight on its INTENTIONAL path if it strays on slight mis-hits or slight adjustments in swing path or club alignment at impact. The distance seems to hold much better on mis-hits to, there is something very new and unique about this shaft design. The shafts seem to do what you want them to do, usualy a good shot produced a good result, but with these shafts a good shot can turn into an excellent shot. The ball comes of the shaft very penetrating and stays up with no ballooning and has good spin on landing. The best way to put it is this shaft feels like your playing
Date published: 2009-07-12
Rated 5 out of 5 by from Ping like a surgeon I visited Tampa Golf in search on new clubs and have since spent countless hours hitting club after club. After picking the Ping i10 irons, shafts became the next item to pick. With my swing speed being 105+, the Ping offerings fell short of my needs. "Snap" mocked up a 6 iron with the KBS Tour X-Flex shaft and it was a match made in heaven. With this shaft, not only can you hear and FEEL impact, the shot consistency was amazing. The problem with most X-Flex shafts is the extreme rigid feel they have at impact, but not the KBS. I actually had to have him check to make sure it was not a mislabeled shaft as it felt so smooth and fluid from start to finish in my swing. Needless to say, performance on these went unmatched with my fitting experience! Great work KBS!!!!
Date published: 2009-04-23
Rated 5 out of 5 by from KBS TOUR SHAFT I put KBS tour stiff .355 tapered shafts in Titleist AP2's and absolutly love them! I play to a 3 handicap from a course here with a Donald Ross designed greens that plays up to 7,000 yards. I play in individual stroke play tournaments against some of the best players in the area. The shot dispersion is very tight with these shafts, there seems to be a type of correction in the shaft that keeps the ball flight on its INTENTIONAL path if it strays on slight mis-hits or slight adjustments in swing path or club alignment at impact. The distance seems to hold much better on mis-hits to, there is something very new and unique about this shaft design. The shafts seem to do what you want them to do, usualy a good shot produced a good result, but with these shafts a good shot can turn into an excellent shot. The ball comes of the shaft very penetrating and stays up with no ballooning and has good spin on landing. The best way to put it is this shaft feels like your playing
Date published: 2009-07-12
Rated 5 out of 5 by from Reliable Shaft for a Smooth Swing This was a replacement for a damaged shaft, and they have performed so well that I used the same shaft in the replacement process...I do experiment a great deal, but this shaft is hard to beat for feel and consistent performance...
Date published: 2015-11-12
Rated 5 out of 5 by from Smooth and high Made a switch to the Tour X from the C Taper X in my 712 mb's. Great feel with this shaft, even in wedges. Much higher ball flight in comparison to C Tapers. Getting the ball in the air is almost too easy, even with long irons.
Date published: 2016-09-15
Rated 5 out of 5 by from Feel Great! I have played DY Gold for 30 years. My new KBS shafts feel great. I bought the 125g tour s+. They apex aboutthree foot higher with my long irons and the muffled feeling vibration feels really nice off my blades.
Date published: 2015-10-30
Rated 5 out of 5 by from Great shaft Very consistent. Great service from golfworks on delivering on time. If you have a ss of 85 - 90mph works great if you soft step once.
Date published: 2016-07-11
  • y_2017, m_5, d_24, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_FS0018, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Would like to order these shafts 4-PW for Titleist AP2 710s precut to +1/2 inch. Is the make and model of my irons enough information for my order details for you to cut these to my desired length?

Asked by: ap2710
Yes we can do this for you and knowing the make and model is the information we need.
Answered by: JimY
Date published: 2017-05-15

If theKBS Shaft is taper tipped, does that mean there is no requirement to trim the tips? It is my understanding that I would install the coorespondign shaft into the correct head and trim to length. I am replacing PXi 6.0 with KBS Tour R+ from the PW-5

Asked by: Cal
That is right. You never tip trim a taper tip shaft. You install the corresponding shafts and butt cut to your finished length.
Answered by: JimY
Date published: 2017-04-18

I m thinking to buy AP1 716 iron and thinking of KBS shaft. My handicap is around 7. My current 8 iron with KBS tour can go 145 yrds. Any tips for the shaft.

Asked by: Zaw
If you are comfortable with the KBS Tour they could also work with the AP1 716 irons. The KBS Tour 105 (FS0041) could be a lighter weight choice and is being used by some of the manufactures. The feedback on this shaft has been very good.
Answered by: JimY
Date published: 2017-04-10

i have the taylormade psi irons. Which tip will i need in order for those to fit? Thanks

Asked by: sd1010
The PSi Taylor Made irons use a .370" parallel tip shaft or the FS0019 KBS Tour shafts. The PSi Tour irons use a .355" taper tip shaft.
Answered by: JimY
Date published: 2017-04-03

please confirm that the .355 tapered shaft (KBS Tour) will fit into Titleist AP2 710 heads - thanks

Asked by: Gary
Yes the Titleist AP2 710 irons use a .355" taper tip shaft.
Answered by: JimY
Date published: 2017-03-01

I use 5.5 rifles in my ping eye 3 OS. Will these work?

Asked by: Peter Malone
Yes the KBS Tour .355" taper tip shaft (FS0018) will fit the Ping Eye 3 OS irons. Ping irons use a .355" taper tip shaft.
Answered by: JimY
Date published: 2017-02-13

what would be a better shaft for me, I am 78 years old and golf 3 time a week,, regular shaft or senior shaft.

Asked by: Robert
Just based on the information you provided, I would recommend the A flex. Flex is generally based on clubhead speed and tempo, but without knowing your speed, we can only guess what flex might work best.
Answered by: GW2002
Date published: 2017-02-13

Im playing Ap2's with DG300S. I'm 57 and I hit an 8 iron about 135, and am looking for a more boring flight, narrower dispersion and of course more distance!. What would you suggest?

Asked by: Birdie
In the KBS shafts I would tell you to look at shafts like the C-Taper (FS0026) and Tour V (FS0036). The C-Taper is the KBS shaft that is designed to produce the lowest trajectory. The Tour V is a lighter weight shaft that they say is designed with a more stable tip section for tighter shot dispersion. It is designed to produce a mid trajectory. At these links if you scroll down the page you will see the shaft descriptions and specifications. https://www.golfworks.com/kbs-tour-c-taper-steel-iron-shafts/p/FS0026/ https://www.golfworks.com/kbs-tour-v-steel-iron-shafts/p/FS0036/
Answered by: JimY
Date published: 2017-02-09
  • y_2017, m_5, d_25, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_34
  • loc_en_US, sid_FS0018, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks