KE4 ST-H Hybrids

KE4 ST-H Hybrids

KE4 ST-H #3 Hybrid - 20 Degree -
In Stock
KE4 ST-H #4 Hybrid - 24 Degree -
In Stock

KE4 ST-H Hybrids

Maltby ST-H Hybrid Views

  • Features a VFT face design for improved ball speed, even on off-center hits.
  • Broad crown design appeals to players that prefer higher lofted fairway woods over traditional hybrids.
  • Unique universal lie sole design keeps the face square to the target at setup regardless of club length or hand position.
  • Shallower face height (1.37") helps get the ball airborne.
  • Adjustable sole weight positioned to optimize the cg location and allows for customization to accommodate almost any playing length or shaft weight.
  • Hybrid comes with 6 gram weight installed installed. Additional weights available.
  • Hybrid alternative to hard to hit long irons providing more consistency in trajectory, distance and dispersion.
  • H3 replaces a traditional #5 wood/ #2 or #3 irons, H4 replaces #7 wood/ #4 or #5 iron.
  • Recommended head cover - MA0236
  • Quick Ship Club Paks available (PMA0253, PMA0253RA)
  • Product Code = MA0253
  • Available Spring 2014

KE4 ST-H Hybrids is rated 4.9 out of 5 by 9.
Rated 5 out of 5 by from Malby fan I just assembled the 24* with a stiff AXE xlaiber tour hybrid shaft last Friday. After playing 2 rounds this weekend my first impression is WOW. Not only does this head look incredible and unique it works very well from the tee, rough and fairway. The shape is unlike any hybrid I have seen before, looking like a cross between a small fairway wood head and a traditional hybrid. The ball gets up quickly and just soars. I cut the shaft at 39 inches and put a 10 gram weight in the head, sw came out at d3. Just perfect for me to fill the gap between my 5 iron and 5 wood. The head ,if anything may be too hot as it seems to go almost 5 wood distance. I may need to choke it down for those 190 to 200 yard shots. Great design on this one!
Date published: 2014-05-28
Rated 5 out of 5 by from Point and shoot I built the 20* towards the end Of Last season for a senior golfer who's a very good buddy of mine.Hes a decent player but struggles With Longer irons. Last year he played 3 round with This in the Bag And the results in the few chances he had to hit it were hit and Miss. Will this year he's decided to use it more Situations and it's been absolutely point and shoot. Ball fight with Apollo lightweight steel Shaft is high and dead straight. Hes Hit Many greens from 170 ish with this club and can get a little extra or Take a little Off when needed. I will soon be ordering the 24* to fill in the gap between my 5 iron and 18* degree hybrid. Hopefully he'll want the 24 as he'll Cover the cost of mine. Haha. Great club highly recommend.
Date published: 2016-04-03
Rated 5 out of 5 by from great club I've played this hybrid set a few times and am not disappointed. I was told these were great by a pro friend of mine. Worth every penny. Easiest club I've ever hit off the grass. Only wish there was a whole set, 2 through 9 would be nice! Thanks Ralph!
Date published: 2014-09-01
Rated 5 out of 5 by from Creating A Club I'm not so much interested in the performance as I am the creation of a fine golf club. With input from the crew at Golf Works, I purchased the correct shaft, grip and glue packets. The glue set up as advertised, a simple procedure. Following the instructions, grip, shaft and club head were prepared and assembled in minimum time. Having the correct items on hand, such as a mixing plate, make cleanup a whiz. The club head itself is well designed and looks fantastic.
Date published: 2016-03-25
Rated 5 out of 5 by from Very Impressed ! Call me old school but some of us are still "Feel" players. I bought the #3-20 degree head and just matched it with a Maltby MPF Graphite Hybrid Shaft in Regular Flex and this may well be the finest hybrid I've ever hit. Ball screams off the face! Nice shallow face allows for quick, soaring flight off any surface. I just can't say enough about this but it's truly amazing ... thank you.
Date published: 2014-06-14
Rated 5 out of 5 by from They're sweet! I was lucky to get to try a prototype of the H3, shafted with a UST m6 reg. 41", d1-2 sw. Incredibly easy to hit. High trajectory but it goes. I had an Adams xdt19*, and this gives me an extra 5 yds. I've used it for a few rounds and have hit some shots I never could have pulled off with the Adams, or even the ke4tour hybrid I also had.
Date published: 2014-04-14
Rated 5 out of 5 by from Easy hitters! Nice high trajectory and straight. Hardly an sideways ball movement. First time I used it on the course produced and eagle, so these left a sweet first impression!
Date published: 2015-06-30
Rated 4 out of 5 by from Great clubs I have the KE4 four and five hybrids and they are my two go to clubs. I have been asked many times who made these clubs. I would recommend them to anyone.
Date published: 2016-07-03
  • y_2017, m_3, d_20, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_MA0253, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Hi there, Could you please tell me the volume (in cc's) of each of these heads? Thanks

Asked by: Geoff
The volumes are 110cc on both the H3 & H4.
Answered by: JimY
Date published: 2017-01-25

I am thinking of purchasing a 3 wood and fairway metals. Can I get your company to assemble them?

Asked by: carl
Yes we can assemble these clubs for you. We do offer some Club Pak where we include the head shaft and grip and do the assembly for free if any of these fit you needs.
Answered by: JimY
Date published: 2016-10-17

What tip trim would you do on the Xcaliber Hybrid regular flex shafts for use the KE4-ST 20 and 24 hybrids?

Asked by: blyall
For the 20 degree it would be a 1" tip trim and for the 24 degree it would be a 1.5" tip trim.
Answered by: JimY
Date published: 2016-10-17

Do you have a 7 hybrid in the 33 or 34 degree range?

Asked by: Jack
No we do not offer a hybrid in the 33 to 34 degree range. The highest lofted hybrid we offer is our LTech (MA0242) H5, which has 28 degrees.
Answered by: JimY
Date published: 2016-07-20

What are the recommended playing lengths of these two Hybrids?  3 & 4?

Asked by: Cliff
40.5" for the 3 and 40" for the 4 with griphite shafts.
Answered by: JimY
Date published: 2016-05-11

What's the approx. weight of these heads with the stock weight installed?

Asked by: Troy
If you scroll down the page at this link you will see the black specification box with all the head weights listed. The listed weights are with the 6 gram weight installed into the clubhead. We do work to a +/- 3 gram weight tolerance from the foundry will all of our clubhead weights. 3H = 232 grams 4H = 236 grams 5H = 242 grams
Answered by: JimY
Date published: 2016-03-29

Why aren't KE4 ST-H Packs Hybrids offered with a steel shaft ? Same question for the Trouble Out HL packs ? Which steel shaft would you recommend ?

Asked by: Chucky5
The basic reason is that 99 % of all hybrids sold come with graphite shafts. There is only 1 steel hybrid specific shaft available, the KBS Tour hybrid steel shaft (FS0020). You can use parallel tip iron shafts in hybrids, which dramatically increases the options. The only recommendation we could make is that if you are going to with steel, you may want to go with a steel shaft that matches what you are using in your irons.
Answered by: GW2002
Date published: 2017-01-27

can you send to the UK

Asked by: Agoo
Yes we do ship to the UK.
Answered by: JimY
Date published: 2015-12-29
  • y_2017, m_3, d_20, h_17CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_25
  • loc_en_US, sid_MA0253, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks