Maltby DBM Forged Iron Heads

Maltby DBM Forged Iron Heads


Maltby DBM True Forged Irons - #3 iron
$32.99
In Stock
Maltby DBM True Forged Irons - #4 iron
$32.99
In Stock
Maltby DBM True Forged Irons - #5 iron
$32.99
In Stock
Maltby DBM True Forged Irons - #6 iron
$32.99
In Stock
Maltby DBM True Forged Irons - #7 iron
$32.99
In Stock
Maltby DBM True Forged Irons - #8 iron
$32.99
In Stock
Maltby DBM True Forged Irons - #9 iron
$32.99
In Stock
Maltby DBM True Forged Irons - #PW
$32.99
In Stock
Maltby DBM True Forged Irons - #GW
$32.99
In Stock

Maltby DBM Forged Iron Heads

Maltby DBM Forged Iron Views

The Maltby DMB irons are the next generation of our proven classic 5 step true forged iron design. The lofts have been increased by 1 degree to a achieve a more modern loft progression along with improved finish durability and CNC groove dimensions. The DBM (Diamonized Black Metal) finish is a chemically implanted finish that is 2x more wear resistant, 3x more corrosion (rusting) resistant and 3x more scratch resistant than nickel chrome finishes. In addition to the added surface protection, the DMB finish is chemically implanted so there is no finish layer thickness added to the exterior finish as with nickel chrome finishes. Because the grooves are machined into forged iron heads prior to finishing, the DBM finish actually increases the productivity of the grooves vs. chrome finishes by eliminating this outer finish layer. The DBM irons also feature precision milled micro grooves to improve the consistency of spin from all turf conditions.

  • "DBM" Diamonized Black Metal finish is a chemically implanted finish that is more wear resistant, corrosion resistant and scratch resistant than any carbon steel finish currently available.
  • DBM finish increases surface hardness without affecting the feel and actually enhances the adjustability aspects of the 1035 carbon steel.
  • Five-step true forging process provides unparalleled quality and playability.
  • 1035 Carbon Steel provides a soft, solid feel and allows for easy adjustability.
  • Traditional blade profile appeals to better players and traditionalist while maintaining a high playability.
  • Cavity back design concentrates weight around the perimeter and low, yielding a very forgiving “players” club.
  • Blended leading and trailing edges of the sole will not snag.
  • Available #3 - PW, GW
  • Conforms to the rules of golf
  • RH only
  • Recommended ferrule – 74PI
  • Product Code = MA0225

Maltby DBM Forged Iron Clubhead Specifications

Maltby DBM Forged Iron Heads is rated 4.9 out of 5 by 41.
Rated 5 out of 5 by from DBM Forged I bought this in a 7 Iron because I was looking to experiment with forged irons. I love the way they look and feel! I first tried it with a prolaunch senior flex 65g, a reshafted Ping shaft(103g), a 95g graphite but the one that worked the best for me was the Graftech 65g Reg Flex because of the mid point shaft flex and stiffer tip. The Graftech 65 doesn't hurt my wrists since I have arthritis and doesn't balloon the ball. I installed a Win-Dritac grip and trimmed the final shaft length same as my Ping Eye 2- for a final swing weight of C6. My Ping Eyes 2's were stock at C-8. I also play Mizuno 800 HD with my DBM Forged in my bag both awesome.
Date published: 2013-11-08
Rated 5 out of 5 by from Very surprised I am a scratch golfer but I enjoy piddling around and trying new equipment. Bought a gap wedge in the DBMs just to give a try. Shafted it with the KBS C Taiper 130x and to say the least after a couple of sessions with it I ordered the rest of the set. I have gone through more clubs than most people I know but I can say without hesitation these irons are the best I've played. My distance control is simply incredible with these irons. Not to mention that I blacked them out and they look is awesome. The finish is very durable also. After probably 30 rounds and a lot of practice the finish is hardly worn at all
Date published: 2017-01-20
Rated 5 out of 5 by from Fantastic feel I have been playing the Srixon Z745 all season as my first pairing of the DBM with the AXE 110 left me with mediocre results. After some shaft tinkering and settling on the DBM heads and the AXE Tour X 95 S shafts I have kicked the Srixon's to the curb. First off the feel on contact is buttery soft almost as if you missed the ball entirely. The ball has a highish, soaring type of flight. They get up quickly and a very forgiving. Distance control is excellent and I lost no yardage from the 745s. Should have tinkered with the shafts much sooner. Absolutely love these heads.
Date published: 2015-11-05
Rated 5 out of 5 by from Very Nice! I bought these heads a couple of weeks ago and installed my favorite shafts(Project X Flighted 5.5). After a few rounds I believe I have found my gamer clubs in the DBM's. Great clubs, smooth when hit in the sweet spot and just the amount of spin I like on approach shots. I have found them easy to hit and the feed back is very telling on good strikes and bad. Any strike of the face will give good distance. The heads look much nicer in person than the photos. I would strongly recommend these to others looking for a forged cavity back iron.
Date published: 2015-04-14
Rated 5 out of 5 by from DBM Forged I bought this in a 7 Iron because I was looking to experiment with forged irons. I love the way they look and feel! I first tried it with a prolaunch senior flex 65g, a reshafted Ping shaft(103g), a 95g graphite but the one that worked the best for me was the Graftech 65g Reg Flex because of the mid point shaft flex and stiffer tip. The Graftech 65 doesn't hurt my wrists since I have arthritis and doesn't balloon the ball. I installed a Win-Dritac grip and trimmed the final shaft length same as my Ping Eye 2- for a final swing weight of C6. My Ping Eyes 2's were stock at C-8. I also play Mizuno 800 HD with my DBM Forged in my bag both awesome.
Date published: 2013-11-08
Rated 4 out of 5 by from Maltby Fan I have played maltby irons for over 10 years. The MO5's and the TE's most recently. While these are very much alike compared to the TE's, there is a major difference in feel. The DBM's feel much harder. Whether this is because of the finish or some other variable, I'm not quite sure. Whowever the durability and looks of the diamondized finish are outstanding. After playing them for probably 20 rounds I am trying to dial in my distance control with these irons. Overall another quality iron with outstanding eye appeal.
Date published: 2013-07-18
Rated 5 out of 5 by from Forged DBM Irons Bought these about 4 months ago, the looks and performance has been outstanding; so much so I sold my I20's previously bagged and dropped my handicap from 7 to 4 will these heads (matched with KBS tour shafts). They feel and perform like you would expect any fine forging to perform; plus that slightest cavity back is a benefit. The DBM is an outstanding process, it is embedded, not a dipped or coated process so it wears beautifully - and the micro grooves work. A possible improvement would be to move a small amount of material increasing perimeter weighting a fraction.
Date published: 2015-10-30
Rated 5 out of 5 by from Great Heads I have been playing the MTF the last couple seasons and really loved the way they played and especially loved the way they felt. After seeing pics of the new DBM, I decided to try the 6 iron as a demo before getting the complete set. The heads are much better looking in person than the pics. I played the 6 iron for a couple rounds and have liked it enough that I now have the 5-pw set. I've been very impressed with the micro grooves so far as they do seem to spin the ball as much as the MTF (pre rule change grooves). The DBM finish seems very durable so far as well, but it's really too early to tell for sure. I do think that the DBM sound/feel a touch clickier than the MTF - it might be the harder finish that has changed the sound a touch to make them feel a bit firmer. Regardless,they still feel great and still have the overall soft sound and feel of forged heads. So far I'm happy and impressed. Guys at my course like the looks of them as well as I've gotten a cou
Date published: 2013-07-06
  • y_2017, m_10, d_21, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_41
  • loc_en_US, sid_MA0225, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

pls about this order: 21047219098225US make the loft according this sheet: P=1°strong,9=2°strong,8=2°strong,7=2°strong,6=2°strong,5=1°strong,4=1°strong. manytks but during order I cant find any specs box.

Asked by: frank
I have passed along this information but it would be best for you to contact our International Trade Accounts Manager, Donna Ours, at dours@golfworks.com with this information. At this link if you scroll down the page you will see the black specification box with all the specifications for these irons. https://www.golfworks.com/maltby-dbm-forged-iron-heads/p/MA0225/
Answered by: JimY
Date published: 2017-10-18

can you adjust the loft without buying your shaft? how i can put the loft specs while ordering?

Asked by: frank
Yes we can adjust the lofts up to 2 degrees. You can put the loft specifications in the Special Instruction box at Checkout. Keep in mind we will only adjust 2 degrees from our listed specifications.
Answered by: JimY
Date published: 2017-10-16

What is the tip diameter for these irons? Also how much can the loft be bent safely?

Asked by: Ray Macko
The DBM irons have a Universal Hosel bore and will accept either .355" taper tip or .370" parallel tip shafts. They can be adjusted for loft and lie up to 2 degrees.
Answered by: JimY
Date published: 2017-10-10

are these heads .355 taper tip or .370 parallel. I have a set of TE Forged chrome that are .370. can you explain if different and why?

Asked by: chris
Both the TE Forged (MA0099) and the DBM (MA0225) irons have a Universal Hosel Bore design that will accept both a .355" taper tip or a .370" parallel tip size shafts. To create the Universal Hosel Bore design there is a smaller diameter hole in the bottom center of the hosel bore. The .355" taper tip shaft tip will fit into this hole. .355" taper tip shafts taper out to approximately .370" where the shaft exits the top of the hosel so it stays centered at the top of the hosel. Epoxy will fill the space around the tip of the shaft. The hosel bore size is initially bored for a .370" parallel tip and then the smaller hole at the bottom is added for the .355" taper tip shaft to fit.
Answered by: JimY
Date published: 2017-10-09

Been playing ping orange. Can these irons be made with similar flat lie

Asked by: Donald
We can adjust the DBM Forged irons up to 2 degrees for lie angle. The orgnge is 2 degrees flat so yes we can do that.
Answered by: JimY
Date published: 2017-10-10

I see the 5-iron is backordered on these and the TE irons. Any idea when these will be in stock?

Asked by: JG_Golf
We are showing the DBM and TE Forged 5 irons are due in the week of October 16th.
Answered by: JimY
Date published: 2017-10-02

Are these on the conforming list for the USGA?

Asked by: Kip
Yes the DBM irons are conforming and listed in the USGA's groove data base. http://www.usga.org/InfoClubsDB/ResultDisplay.aspx?clubtype=Iron&Manf=The%20Golfworks&Prod=All
Answered by: JimY
Date published: 2017-10-02

before waiting the availability for #5 iron dbm its possible buy a set with this specs: all irons longer 1/2 inch and 1° lie upright; loft: p=45_9=40,5_8=36_7=31,5_6=27,5_5=23,5_4=21 all with pxlz 5.0?

Asked by: franl
There is not problem making them 1/2" longer and 1 degree upright but we limit loft adjustments to 2 degrees and some of the lofts you are requesting are more then 2 degree from our listed specifications.
Answered by: JimY
Date published: 2017-09-29
  • y_2017, m_10, d_21, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_111
  • loc_en_US, sid_MA0225, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks