The GolfWorks Enhanced Graphite Shaft Extractor

The GolfWorks Enhanced Graphite Shaft Extractor


The GolfWorks Enhanced Graphite Shaft Extractor
$199.99
In Stock
Broken Graphite Shaft Extractor
$9.99
In Stock
Ratchet Box Wrench
$4.99
In Stock

The GolfWorks Enhanced Graphite Shaft Extractor

We've taken our most popular Graphite Shaft Extractor and made it better! The Enhanced Graphite Shaft Extractor is designed with an internal load sensing spring and indicator. To use, place the club into the device and tighten as you would any screw-type extractor. Tighten until the indicator shows the spring is loaded. Then apply heat. The pressure exerted by the spring is enough to cause the head to slide off once the epoxy breaks down from the heat, but not so much spring pressure that the head shoots off! Your hands remain free, as you don't have to feed pressure while the head starts to move. Improves efficiency and reduces the damage to shafts and heads.

Please Note: Additional shipping charges required due to weight.
Maltby Design Enhanced Graphite Shaft Extractor is rated 4.7 out of 5 by 19.
Rated 5 out of 5 by from Great tool for extracting graphite shafts. I've been removing graphite shafts using a vice, shaft clamp, and a shaft pry bar for years, standing with my feet on the vice mount, applying heat, and prying on the bar. A very physical effort and not a great batting average on saving the shafts. It's really hard to do a completely straight push with a pry bar. I bought a used drive with a Project X Tour S graphite shaft that I really wanted to save and try in another driver, so I ordered the shaft extractor to be sure I could remove it and future graphite shafts. The instructions were easy to follow and I set it up, applied heat with my hot air gun, and when the epoxy broke, the spring pushed the head off. I was very pleased and no damage to the shaft. I would recommend this tool to anyone who wants to pull graphite shafts and reuse them.
Date published: 2015-10-03
Rated 5 out of 5 by from Solid piece of Kit. I bought this specifically to remove shaft adapters without destroying them. At about $25 each they add considerably to a reshaft and are very sensitive to heat. This does the job. I have the adapter removal kit (basically a washer and bolt) that can pull on the adapter instead of pushing it. That works as long as you are patient and use just enough heat. I still like to use my vice and pry bar for most head removals because I am a dinosaur and have been doing it that way since 1990...;-) This is a solid piece of equipment and not flimsy in any way. If I could change something it would be to allow the channel in the bottom to take a standard size piece of wood..
Date published: 2016-09-30
Rated 5 out of 5 by from Simply great! This thing is heavy duty, very well built. The spring loading feature is great - no worries about using too much heat. I was a little skeptical initially thinking the price was a little high but once I received it and put it to use I realized it is worth every single penny! Great tool and great value!
Date published: 2012-12-16
Rated 5 out of 5 by from Excellent Tool Just received this vise on Friday. Mounted it next to my radial arm saw where I cut shafts with a masonry blade (giant Dremel tool). Read the directions for use, and within 30 minutes, I removed two shafts from drivers, thereby, saving me just over $100 in shafts. This is so simple to use. Perfect addition to any hobbyist's (me) or clubmaker's shop.
Date published: 2011-05-03
Rated 5 out of 5 by from saft extracter enhanced This is the best extractor on the market absoultely perfect for the job. Fast and easy to use. No problem for the work needed done. I Strongly recommend this extractor for any level of golf repair.
Date published: 2009-04-09
Rated 5 out of 5 by from Easy to use Bought this for something to fiddle with...very easy to use...I've removed a few graphite shafts and a couple tip adapters...a must have if you are a do it yourself golf nut.
Date published: 2015-07-25
Rated 1 out of 5 by from Does not include Pads There are no pads included in the box and no indication they must be purchased separately. In fact, the web page does not even include links for pads. I ordered the shaft extractor and paid for 2nd day shipping because I needed it this weekend. Now, I have a $200 hunk of useless steel because it cannot be used without the pads - the shaft slips.
Date published: 2016-05-07
Rated 5 out of 5 by from Works perfectly! Bought this together with OEM Adaptor Saver Kit and have extracted a few adaptor from shafts I wanted to align. It was so much easier then i thought it would be. Easy, quick and still one hand tree. If you plan to do shaft extractions work, buy this one and save yourself time and avoid problems.
Date published: 2015-12-15
  • y_2017, m_3, d_24, h_14
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_19
  • loc_en_US, sid_GW1009, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

will this unit handle 335 to 370 tip sizes in steel and graphite?

Asked by: derf902
Yes this will work with .335", .350", .355" and .370" and sizes larger then .370".
Answered by: JimY
Date published: 2017-03-11

When is this going to be available ?

Asked by: Timmy
It would be best for you to contact GolfWorks Canada directly. We have these in stock here in the US and ship to GolfWorks Canada on a regular basis. http://www.golfworks.com/maltby-ltech-hybrid-pak/p/PMA0242/
Answered by: JimY
Date published: 2017-01-16

Is the ratchet box wrench included or must it be purchased separately?

Asked by: hicksm72
The ratchet box wrench is included with the purchase.
Answered by: JimY
Date published: 2016-12-12

hi, what is the "pad" for as i read it in one of the Q and A, Must purchase it with item for it to be use to extract shaft??

Asked by: knaaccounts
The "Pads", which do come installed on the machine when you purchase it, protect and hold the shaft when you clamp it into the shaft puller. If by chance they become damaged we do sell replacement pads (FASRP).
Answered by: JimY
Date published: 2017-03-14

Sir i wanted to know what is the dead weight of this machine

Asked by: Harry Kang
GW1009 weights 14 lbs.
Answered by: JimY
Date published: 2017-01-27

I am looking for a 3 or 4 way graphite shaft extractor 

Asked by: Redsumm71
I am not sure what you mean by a 3 or 4 way shaft extractor? If you mean does it adapt to 3 or 4 different shaft sizes all of our extractors will handle the different size shafts.
Answered by: JimY
Date published: 2016-05-02

Just bought one of these.  Curious to where I get replacement parts for the part that grips the shaft

Asked by: Yama
You will find the replacement pads available at this link. The order code for the replacement pads is FASRP. The replacement pads will fit the GW1009, MA2007 and FASTE graphite shaft extractors. http://www.golfworks.com/maltby-graphite-shaft-extractor/p/MA2007/
Answered by: JimY
Date published: 2016-05-02

Can this be used to remove steel shafts from a set of irons?

Asked by: Dana
Yes, any graphite shaft puller can be used to remove steel shafts from any type of head but it is not necessary. You can use a TSL or a STSL in a vise to remove steel shafts. http://www.golfworks.com/lock-tight-shaft-clamp/p/TSL/ Instructions for removing steel shafts can be found here: http://www.golfworks.com/images/art/2008ReshaftSteel.pdf
Answered by: Admin
Date published: 2016-04-28
  • y_2017, m_3, d_25, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_23
  • loc_en_US, sid_GW1009, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks