Maltby KE4 Forged Irons

Maltby KE4 Forged Irons


KE4 Forged - #4 Iron Head
$29.99
In Stock
KE4 Forged - #5 Iron Head
$29.99
In Stock
KE4 Forged - #7 Iron Head
$29.99
In Stock
KE4 Forged - #8 Iron Head
$29.99
In Stock
KE4 Forged - #9 Iron Head
$29.99
In Stock
KE4 Forged - #PW Iron Head
$29.99
In Stock
KE4 Forged - #GW Iron Head
$29.99
In Stock
KE4 Forged Complete Set (4-PW,GW)
$209.99
In Stock

We Also Recommend

Maltby KE4 Forged Irons

KE4 Forged Iron Views

Finally a forged iron design targeted at mid to lower handicap players that allows for weight adjustments to made directly to the club head to accommodate numerous shaft weight and length build specs. The KE4 Forged irons come with a factory installed 6 gram weight but can accept all of the KE4 Weight Adjustable System weights for unmatched adjustability and custom fitting options.

Form Forged from 1030C Carbon Steel, the Maltby KE4 Forged irons are a Super Game Improvement “blade” iron head design featuring MG (Micro-Groove) technology. MG groove technology places more grooves on the face than a traditional iron groove layout, improving spin rate consistency.

The cavity of the KE4 Forged iron features a double under-cut flange to optimize weight distribution for improved feel and playability. A “Tour” ground leading edge, front to back sole camber and optimal sole/bounce angles for each club helps to prevent digging through the impact zone.

  • Form Forged from 1030C Carbon Steel.
  • MG groove technology.
  • Super Game Improvement playability in a “blade” profile.
  • Double under-cut cavity.
  • KE4 Weight Adjustable System accepts 2, 4, 6, 8, 10, 12 and 14 gram screw weights.
  • .370” hosel diameter.
  • Product Code = MA0218

Not Found.

hello , have you in stock the KE4 FORGED N°8 , I need iron head n° 5,6,8,9 and PW thank you , best regard

Asked by: A GOLFEUR
When I check inventory it shows we have 1 #8 iron in stock. These heads are being discontinued and being sold as sets only except for the few remaining pieces we have left. The individual 8 iron is not going to show up on the web site so it would be best to contact Customer Service with an order.
Answered by: JimY
Date published: 2015-09-01

MA0218s...my new Maltby irons were destroyed in a car accident I need 7-PW,GW but I dont see 8 listed in the in stock items are the 8 heads no longer available?  

Asked by: DudeWheresMyCode
You might want to give Customer Service a call and possibly we can track down an 8 iron head for you and get you the 7,9,PW & GW. We will be getting more KE4 Forged heads in stock to balance out our remaining stock but they will then be put into sets and sold as sets only and then be discontinued when they are sold out.
Answered by: JimY
Date published: 2015-02-24

Can these heads work with a 355 shaft tip?

Asked by: Steveb
Yes, you can install a .355" taper tip shaft into any .370" hosel if you use our SHIM T shims. These are brass shims that fill the void created with the smaller .355" shaft tip. http://www.golfworks.com/product.asp?pn=SHIM
Answered by: Admin
Date published: 2015-02-21

Are there any other shaft options for the club pack other than the low end Score shafts.

Asked by: popeye
You can contact customer service and they maybe able to help you with some other shaft options. 1-800-848-8358.
Answered by: JimY
Date published: 2015-01-29

Hi, I am looking to build my own clubs from scratch, currently I use Taylormade Rocketblaze with stiff shafts which I find hard work, I am looking at these KE4's with a Project X 5.0 Flighted shafts as an improver what would your view be on this choice  

Asked by: leaky143
Without knowing more details: If you are finding that the head is "hard work", the KE4 Forged and the Rocket Bladez are fairly similar in playability. The Rocket Bladez are however, much stronger lofted then the KE4 Forged irons. This will make the long to mid irons more difficult to get airborne. If you feel the shaft is the problem, the Project X 5.0 is probably more flexible than a stock "stiff" flex shaft. A softer shaft will almost always feel better.
Answered by: Admin
Date published: 2014-12-15

Do these come in left handed?

Asked by: CarlAmsden
Unfortunately no. The only LH iron set we offer is the KE4 U30. http://www.golfworks.com/product.asp_Q_pn_E_MA0175L_A_cn_E_677
Answered by: Admin
Date published: 2014-12-12

I have a set of Cobra S2 Max clubs. What iron head would you recommend that would be a close match to the Cobra 5 Iron?

Asked by: Clipper
The MPF playability numbers from the KE4 Forged iron (MA0218) match up pretty well to the specifications of the S2 Max. The S2 Max probably has a little more offset then the KE4 Forged. Our KE4 S (MA0254) could also be a good choice and likely has more similar offset measurements. You can find the MPF Playability measurements at this link. http://www.golfworks.com/article.asp?ai=870&eid=IronMPF
Answered by: JimY
Date published: 2014-12-01

I'm making extra long irons. Need to remove about 11 gm per head. I can see that -4 gm obtained switching to the 2 gr plug.  Can these be 'selected by weight' to minimize total grams when ordered? (I can drill hossel and weight back to get -6 gm.)  

Asked by: Bill122
We can hand pick for weight, but the tolerances are relatively small and a hand pick may only yield a 1 or 2 gram savings. We do charge $4.50 for the hand pick charge. I would be cautious drilling the hosel for weight savings, especially if you plan to do any cutom bending for lie or loft. Drilling the hosel deeper than the designed depth can weaken the hosel.
Answered by: GW2002
Date published: 2014-11-19
  • y_2017, m_5, d_23, h_3CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_9
  • loc_en_US, sid_MA0218, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks