Maltby KE4-MP-1 Hybrid Iron Heads

Maltby KE4-MP-1 Hybrid Iron Heads


KE4 MP-1 Hybrid/Iron - #4 Iron -
$31.99
In Stock
KE4 MP-1 Hybrid/Iron - #5 Iron -
$31.99
In Stock
KE4 MP-1 Hybrid/Iron - #6 Iron -
$31.99
In Stock
KE4 MP-1 Hybrid/Iron - #7 Iron -
$31.99
In Stock
KE4 MP-1 Hybrid/Iron - #8 Iron -
$31.99
In Stock
KE4 MP-1 Hybrid/Iron - #9 Iron -
$31.99
In Stock
KE4 MP-1 Hybrid/Iron - #PW Iron -
$31.99
In Stock
KE4 MP-1 Hybrid/Iron - #GW Iron -
$31.99
In Stock

Maltby KE4-MP-1 Hybrid Iron Heads

Maltby KE4 MP-1 Hybrid Iron Views

Modern hybrids have been proven to perform much easier than long and mid irons for the majority of golfing community. Over the past 7 or 8 years golfer have opted to replace their 3 and 4 irons with much easier to hit hybrids. More recently the 5 and 6 irons have been slowly being replaced with higher lofted hybrids and producing consistently better golf shots for all. The KE4 MP-1 Hybrid/Irons takes this trend to higher level. The wide soled hollow MP-1 irons are very turf friendly, true hybrids throughout the entire set. The MP-1 Hybrid/ Irons are precision cast from 431 stainless steel and weight adjustable to accept most custom lengths and shaft weights. The difficult task of filling your bag with mixed-matched hybrids with different offsets and lengths to replace your long and mid irons is over!

  • Hybrid playability throughout the entire set for consistent gapping between clubs.
  • Precision cast from 431 Stainless Steel.
  • Adjustable toe weight optimizes the center of gravity and accepts all of the KE4 screws for unmatched customization options.
  • 6 gram screw weight included with each head.
  • Glare resistant Black PVD finish.
  • Consistent offsets for consistency from club to club.
  • Wide sole design with minimal bounce nearly eliminates fat shots but can still produce shots from tight lie conditions.
  • Available 4-PW,GW RH only.
  • Recommended ferrule 60PI
  • Quick Ship Club Pak available

Maltby KE4 MP-1 Hybrid/Iron Clubhead Specifications

Maltby KE4-MP-1 Hybrid Iron Heads is rated 4.6 out of 5 by 7.
Rated 5 out of 5 by from Exactly what I needed and more. I have played all manor of golf clubs over the past 33 years and Maltby golf has always been a steady and consistent producer of golf equipment. I've been playing blades for the last ten years and decided now I need to enjoy the game more. I opted to shaft the KE4 MP1's with the FST 125 shafts and made them 1/2 longer than standard and installed the 2g weight to compensate for the length, and these are by far the best clubs I have played. Thank you for your continued innovations and I look forward to building my father a set. (clubpaks are a great deal!)
Date published: 2016-12-08
Rated 3 out of 5 by from 2nd review I now have the complete set 4 thru GW with Maltby S Flex MPF shafts. I love the size and shape of these hybrids. Fun factor is off the charts. Off center hits and you're still on or around the green. I get a mid ball flight with the MPF shafts. After approx 4 rounds of golf the PVD coating is starting to come come off to the bare metal. The impact of the golf ball on the face of the club takes the coating to the bare metal. Normal wear and tear of hitting the ground will remove the PVD coating to the bare metal. I take care of my golf clubs so misuse is not whats happening. My opinion concerning PVD coating or any other painted coating, is that it is not a good choice for golf clubs. I would rather have no coating with either a natural tumble finish, or polished metal finish. I'll never purchase another golf club head with PVD coating, or any other painted type of coating.
Date published: 2013-09-24
Rated 5 out of 5 by from Large Iron I purchased the 5 iron head and Maltby MPF graphite iron shaft. Very forgiving head. At address the head appears to be twice the size of any iron head that I've seen. I like that it's designed to look like an iron head rather than a mini wood head. Very good distance. The PVD coating is nice but the sole of the club already has scratches that really stand out against the black PVD. I'm thinking that the PVD on the sole of the club may not last very long. Overall I like the clubs performance.
Date published: 2013-08-23
Rated 5 out of 5 by from Great iron like hybrid! I bought the 4h head and paired it with a KBS Tour steel shaft. I've played several rounds with it and so far I'm finding it better than the wood-like hybrids I've been using. It's easy to hit high and I find the iron shape easier to line up. I can also hit a low shot with this that's impossible with other hybrids. It's pricey, but well worth the $$$ if you want a much more forgiving iron instead of a wood like hybrid.
Date published: 2013-09-18
Rated 5 out of 5 by from great feel I bought the #4 #5 #6 and these are truely easy to hit. I play on a links style course and chip a lot with the #6. My chipping confidence from very tight greenside lies has improved a lot. These are very friendly irons on full shots. My #7 #8 #9 #pw are Maltby DBM Forged irons and they provide great feedback on each shot. same black colour as the others. All in all a good mix assembled by Golfworks for a very reasonable price
Date published: 2014-12-16
Rated 5 out of 5 by from easy to hit from anywhere I have been using 3,4,5,hybrids and I really like the ease of hitting them ,so I started looking for a six iron replacement.I paired this head with a kuro kage black iron shaft and love the results.Mid to high launch and carry and roll are perfect .I'm hitting this combination 165 yards with ease,may have to try the 7 and 8
Date published: 2015-06-02
Rated 4 out of 5 by from Super Forgiving Head This iron is exactly what I want in an iron. Mid iron has a slightly larger head and thicker sole. Short iron is about the right size. Should be super forgiving for high handicapers and beginners. Thank you golfworks for making this head.
Date published: 2014-02-21
  • y_2017, m_2, d_19, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_7
  • loc_en_US, sid_MA0232, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Which shafts would you recommend using in these heads.. shafts for HYBRIDS or IRONS ? Thanks

Asked by: Ranger
The MP-1 Iron, is an iron so the recommendation would be to use iron specific shafts.
Answered by: GW2002
Date published: 2017-02-13

According to one of the above reviews, the black finish tends to come off after a few rounds. Is this still a concern?

Asked by: Tom
Yes the black finish will show wear rather quickly. That is still an issue with this model.
Answered by: JimY
Date published: 2016-12-27

what is loft on gw

Asked by: mkennon
The loft is 50* + or - 1*
Answered by: Brent Dill
Date published: 2016-08-19

Do you have left handed clubs?

Asked by: len
No the KE4 MP-1 irons are not available in left hand.
Answered by: JimY
Date published: 2016-08-08

do they come in left hand?

Asked by: len
No the KE4 MP-1 irons are not available in left hand.
Answered by: JimY
Date published: 2016-08-08

are these usga conforming heads?

Asked by: jfi
The grooves are designed to be USGA Conforming but we have not submitted these to the USGA for testing.
Answered by: JimY
Date published: 2016-06-09

what is the degree of the gw head-martby ke4 mp 1 hybrid?

Asked by: Fred
You can see the lofts and all the specifications for the KE4 MP-1 Irons by scrolling down the page to the black specification box at this link. http://www.golfworks.com/maltby-ke4-mp-1-hybrid-iron-heads/p/MA0232/
Answered by: JimY
Date published: 2016-05-12

I am a 22-25 handicap golfer. Would you recommend this set for me?

Asked by: James78
Yes we would recommend these irons. They could be a very good set for you. We offer this club Pak for these irons that could possibly work for you. http://www.golfworks.com/maltby-ke4-mp-1-hybrid-iron-pak/p/PMA0232/
Answered by: JimY
Date published: 2016-04-21
  • y_2017, m_2, d_19, h_1CST
  • bvseo_bulk, prod_bvqa, vn_bulk_0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_21
  • loc_en_US, sid_MA0232, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks