Maltby KE4 ST-F Fairway Woods

Maltby KE4 ST-F Fairway Woods

KE4 ST-F Fairway Wood - #3 (14 degree) -
In Stock
KE4 ST-F Fairway Wood - #5 (18 degree) -
In Stock
KE4 ST-Fd Deep Fairway Wood - #3 (14 degree) -
In Stock
KE4 ST-Fd Deep Fairway Wood - #5 (18 degree) -
In Stock

Maltby KE4 ST-F Fairway Woods

Maltby KE4 ST-A1 Fairway Views

The Maltby KE4 ST-3d features a deep (1.594") 455 Carpenter Steel face design with weight positioned more forward on the sole to produce a flatter trajectory with less spin. The ST-3d is ideal for golfers that are high ball hitters looking to maximize distance and control off of the tee box or simply desire more carry and roll distance from the fairway. Available in #3 14 degree.

The Maltby KE4 ST-F multi-material fairway woods feature a forged 455 Carpenter Steel high strength steel face and a 17-4 stainless steel body to produce an extremely solid feel at impact and very high initial ball speeds. The shallow 1.275" face height breeds confidence when addressing the golf ball. A very slight hosel offset appeals to all types of players and helps to square the club face at impact and also increases the rearward center of gravity for an improved launch angle. The ST-F fairways woods are weight adjustable to allow for numerous custom shaft and length options. The stock heads comes with a 6 gram weight pre-installed but any of the KE4 weights can be used to adjust swingweight or head feel. In addition, the ST-F fairway woods sole design features a sloped rearward rail design that allows the sole to glide across the turf with minimal ground contact.

  • Multi-material design: 17-4 stainless steel body and 455 Carpenter Steel face, providing extremely solid feel and high ball speeds.
  • Unique rear rail design reduces ground contact, gliding across the turf for more solid contact.
  • Adjustable weight allows for customization and positions weight low and rearward to promote the optimum trajectory and also increasing MOI (Moment of Inertia) for added distance and stability on off center hits.
  • Single screw weighting system allows for a variety of club length and shaft weight options. 2, 4, 6, 8, 10, 12 and 14 gram weights available in both the traditional KE4 3 prong weight screws and the KE4 triangle weight screws.
  • Weight wrenches available - MA0032WT (Triangle) and MA0032W (3 prong)
  • Product Code - MA0228

Maltby KE4 ST-F Fairway Clubhead Specifications

Maltby KE4 ST-F Fairway Woods is rated 4.9 out of 5 by 20.
Rated 5 out of 5 by from KE4 ST-F Fairway 3D I bought the 3 D fairway wood assembled it with Paderson Blue fairway shaft in A flex. The match of these two products is amazing, easy to get the ball in the air distance is much further than any other 3 wood I have ever tried.I am a 12 handicap golfer with a 45 inch driver swing speed of 87 MPH.I do not believe there is any manufacturer anywhere in the golf industry that makes a wood anywhere close to this 3 wood.I am a custom club maker with over 20 years in the golf industry.This 3 wood assembled with the proper shaft for each individual golfer will perform for just about any golfer.I highly recommend this club.
Date published: 2016-01-01
Rated 4 out of 5 by from Performer for sure Bought this head looking for a driver substitute on tight par 4's. Delivery from The Golf Works was exceptional. I installed a Grafalloy Pro Launch Blue stiff shaft. I've had it to the range twice, hitting both off the grass and tee. The performance is very good and the sound at contact is pleasing. My ball flight I would say is somewhere mid trajectory, not bullets but not super high. Carry is in the 240 yard area + or - depending on the quality of the strike. The only negative I can report is the the black sole. Scuffs up pretty quickly. Granted you don't see it when in use but I believe it would be a product improvement if the sole was a metal finish rather than painted.
Date published: 2015-07-08
Rated 5 out of 5 by from Maltby's Got It Right I wanted to make a switch from the Tricept BM3 Forged Adjustable Fairway Woods - which I dearly love for their hot face and great balance, because the bottom runner technology doesn't cut it from the fairway or rough. Great off the tee, but nowhere else are they ideal. Regardless, decided to try these KE4 ST-F Woods and just love how they perform. Fantastic from the FW, ideal from light rough where the lower profile face gets the club head through. Fitted them with the MPF Distance Graphite Wood Shafts, and I hope I never need another FW Wood combination! The interchangeable weights make tuning the club a dream. Nice job, Ralph!
Date published: 2013-07-26
Rated 5 out of 5 by from Awesome I bought the 3d as I am a high ball hitter. Really outstanding club. I had it hand picked at 13 degrees. I paired this with a Grafalloy Prolaunch Red, x flex, PURED. I built it at 43.5 inches. Really amazed at how solid this club is. Incredibly solid feel, very long. I hit one of the best 3 woods off the deck into a par 5 this week to set up an eagle putt, and have hit numerous bombs off the tee. It is easy to work both ways. Tremendous club, can't say enough.
Date published: 2014-08-01
Date published: 2014-05-31
Rated 5 out of 5 by from Wonderful Bought the club pak and added hot melt. As a seasoned fitter/builder I've seen my share of 3 woods and typically it is one of the toughest clubs to get dialed in. No 3 we will be the best both from the fwy and tee. There is a fundamental compromise on one or the other to be optimal. The ST-F is as good as anything I've used off the deck. Accurate, easy, long. Fit the shaft, length, weight proper and it is absolute money. Really nice looking also. The hot melt makes it feel awesome too.
Date published: 2014-05-08
Rated 5 out of 5 by from Pure Awesomesauce This is the first Maltby product I have tried and my first club build and quite frankly I am blown away. If all the other products are as good as this 3 wood than I will have a bag full of Maltby sticks in the near future. The club is extremely easy to hit both off the tee and the turf. I built mine to reach par 5's in two but I'm starting to use it more and more off the tee on short par 4's. The 14* head gets up and launches high but it has a piercing trajectory. I am a high spin player and had ballooning issues with my other 3 wood but not with this club. In terms of feel and sound, it reminds me of the Callaway x hot woods. Seems to be about 10 yards longer than my other 3 wood but that could be due to the better spin numbers and 1/2 inch longer shaft. The footprint of the club is a little bigger than I anticipated but the face is very shallow. To me it looks like a Titleist wood that's been stretched out from front to back. Best 3 wood I've hit to date and I've tried every ma
Date published: 2013-11-25
Rated 5 out of 5 by from Easy to hit. Solid feel. Purchased the 3 wood (ST-F) and had an Excaliber Tour SL regular shaft installed with Golf Pride Tour Wrap grip. The combination is the best 3 wood I have ever hit. Great off the tee and off the fairway. We are in the winter months in SC and the grass is dormant. Can't wait until the ball sits up in the fairway. I should be able to launch the ball even higher and farther. Fantastic head and shaft. Will be building an identical 5 wood at some point. By the way, spend the money and have the shaft pured. It makes a big difference.
Date published: 2015-02-09
  • y_2017, m_3, d_26, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_MA0228, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

If I were to install the Aldila VS Proto 70X to the 3 wood ST-FD Head with a Golf Pride tour wrap grip (regular size) and make total playing length 42.5inches, would the 14 gram weight be enough to achieve d4 swing weight or do I need a tip weigh too?

Asked by: Gus
When I do a swingweight calculation based on these spec's it comes up in the C4 range. Changing the 6 gram stock weight to 14 grams will give you 4 more swingweights or bring it up to C8. The heaviest tip weight we sell is 10 grams (GW0121) which will add 5 swingweights and get you up to D3.
Answered by: JimY
Date published: 2017-03-09

If I were to install the Grafalloy "Blue" 65X to the 3ST-FD Head with a Golf Pride tour wrap grip (regular size) and make total playing length 43.0 inches, what gram weight would you recommend to achieve a D4 swing weight?

Asked by: Gus
My calculations show it would come up to approximately C6 at these specifications. This 3 wood comes with a 6 gram weight installed and can be changed up to a 14 gram weight which would only add 4 swingweights or take the swingweight up to D0. You would still have to use a tip weight or Clubhead Tac (CLHT) in the clubhead to get the swingweight up to D4. It takes 2 grams of weight in the clubhead to increase the swingweight by 1 swingweight.
Answered by: JimY
Date published: 2017-02-21

3d face length - is it also 3.34"? The face is tall enough for a driving club. I hit my Titleist 910fd (light and long) as far as a driver but the face is ¼" shallower. The short distance between shaft and head axis is easier to square up than a 460.

Asked by: Ybnormal
The face height on the 3 deep face is 1.594" and it is the same on the deep face 5 wood. The standard 3 and 5 woods are 1.281". At this link if you scroll down the page to the specification box you can see these measurements.
Answered by: JimY
Date published: 2017-02-06

I have both heads, I've had the stf for a few years and I bought the stf-d recently. I going to put a new SHAFT in the stf head, so I want to know if the hosel bore through to the inside of the head ? I don't remember if I used a hosel plug.

Asked by: lamont
There is a hole at the bottom of the hosel bore that opens up into the clubhead but there should be a plug or disk that covers the hole to keep epoxy from getting into the clubhead when assembling the club. If the plug or disk is missing you will see a ring around the inside edge of the hosel approximately 1.25" down from the top. We do sell replacement metal wood bore plugs (MWHBP) if you need them.
Answered by: JimY
Date published: 2017-01-31

what is the standard length for a 3 wood I am 5ft 11 .I have a 4 wood made by you guys some 20 years ago and it still going strong and is my favourite fairway club. Thanking you in advance for your response

Asked by: Teep
Here is the link for our Standard Length Chart. Nice to hear that 4 wood is still working well.
Answered by: JimY
Date published: 2017-01-24

Looking to purchase two KE4 fairway heads # 3 & #5 deep face model. Please advise if available in Canada? Thanks, Cameron.

Asked by: Cam
Yes you can purchase them through our GolfWorks Canada operation in Ottawa. Here is the link from the GolfWorks Canada web site for these fairway woods. Here is the link for the Contact information for GolfWorks Canada.
Answered by: JimY
Date published: 2016-12-29

are these woods USGA approved?

Asked by: Rob
Yes these conform to the USGA rules. The USGA does not maintain a list for fairway woods or require that fairway woods be sent in for testing.
Answered by: JimY
Date published: 2016-12-15

You don't offer these in a standard 4-wood do you? I don't hit either my 5 or 3 wood much. I've thought about carrying a 4 wood to hit off tee when a driver is too much and the use off fairway.

Asked by: KnoxHorn
We do not offer the ST-F in a 4 wood. We do not have a 4 wood in any of our fairway wood models.
Answered by: JimY
Date published: 2016-12-14
  • y_2017, m_3, d_26, h_15CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_33
  • loc_en_US, sid_MA0228, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks