Maltby KE4 ST-F Fairway Woods

Maltby KE4 ST-F Fairway Woods


KE4 ST-F Fairway Wood - #3 (14 degree) -
$44.99
In Stock
KE4 ST-F Fairway Wood - #5 (18 degree) -
$44.99
In Stock
KE4 ST-Fd Deep Fairway Wood - #3 (14 degree) -
$44.99
In Stock
KE4 ST-Fd Deep Fairway Wood - #5 (18 degree) -
$44.99
In Stock

Maltby KE4 ST-F Fairway Woods

Maltby KE4 ST-A1 Fairway Views

The Maltby KE4 ST-3d features a deep (1.594") 455 Carpenter Steel face design with weight positioned more forward on the sole to produce a flatter trajectory with less spin. The ST-3d is ideal for golfers that are high ball hitters looking to maximize distance and control off of the tee box or simply desire more carry and roll distance from the fairway. Available in #3 14 degree.

The Maltby KE4 ST-F multi-material fairway woods feature a forged 455 Carpenter Steel high strength steel face and a 17-4 stainless steel body to produce an extremely solid feel at impact and very high initial ball speeds. The shallow 1.275" face height breeds confidence when addressing the golf ball. A very slight hosel offset appeals to all types of players and helps to square the club face at impact and also increases the rearward center of gravity for an improved launch angle. The ST-F fairways woods are weight adjustable to allow for numerous custom shaft and length options. The stock heads comes with a 6 gram weight pre-installed but any of the KE4 weights can be used to adjust swingweight or head feel. In addition, the ST-F fairway woods sole design features a sloped rearward rail design that allows the sole to glide across the turf with minimal ground contact.

  • Multi-material design: 17-4 stainless steel body and 455 Carpenter Steel face, providing extremely solid feel and high ball speeds.
  • Unique rear rail design reduces ground contact, gliding across the turf for more solid contact.
  • Adjustable weight allows for customization and positions weight low and rearward to promote the optimum trajectory and also increasing MOI (Moment of Inertia) for added distance and stability on off center hits.
  • Single screw weighting system allows for a variety of club length and shaft weight options. 2, 4, 6, 8, 10, 12 and 14 gram weights available in both the traditional KE4 3 prong weight screws and the KE4 triangle weight screws.
  • Weight wrenches available - MA0032WT (Triangle) and MA0032W (3 prong)
  • Product Code - MA0228

Maltby KE4 ST-F Fairway Clubhead Specifications

Maltby KE4 ST-F Fairway Woods is rated 4.9 out of 5 by 28.
Rated 4 out of 5 by from Performer for sure Bought this head looking for a driver substitute on tight par 4's. Delivery from The Golf Works was exceptional. I installed a Grafalloy Pro Launch Blue stiff shaft. I've had it to the range twice, hitting both off the grass and tee. The performance is very good and the sound at contact is pleasing. My ball flight I would say is somewhere mid trajectory, not bullets but not super high. Carry is in the 240 yard area + or - depending on the quality of the strike. The only negative I can report is the the black sole. Scuffs up pretty quickly. Granted you don't see it when in use but I believe it would be a product improvement if the sole was a metal finish rather than painted.
Date published: 2015-07-08
Rated 5 out of 5 by from KE4 ST-F Fairway 3D I bought the 3 D fairway wood assembled it with Paderson Blue fairway shaft in A flex. The match of these two products is amazing, easy to get the ball in the air distance is much further than any other 3 wood I have ever tried.I am a 12 handicap golfer with a 45 inch driver swing speed of 87 MPH.I do not believe there is any manufacturer anywhere in the golf industry that makes a wood anywhere close to this 3 wood.I am a custom club maker with over 20 years in the golf industry.This 3 wood assembled with the proper shaft for each individual golfer will perform for just about any golfer.I highly recommend this club.
Date published: 2016-01-01
Rated 5 out of 5 by from Maltby's Got It Right I wanted to make a switch from the Tricept BM3 Forged Adjustable Fairway Woods - which I dearly love for their hot face and great balance, because the bottom runner technology doesn't cut it from the fairway or rough. Great off the tee, but nowhere else are they ideal. Regardless, decided to try these KE4 ST-F Woods and just love how they perform. Fantastic from the FW, ideal from light rough where the lower profile face gets the club head through. Fitted them with the MPF Distance Graphite Wood Shafts, and I hope I never need another FW Wood combination! The interchangeable weights make tuning the club a dream. Nice job, Ralph!
Date published: 2013-07-26
Rated 5 out of 5 by from Awesome I bought the 3d as I am a high ball hitter. Really outstanding club. I had it hand picked at 13 degrees. I paired this with a Grafalloy Prolaunch Red, x flex, PURED. I built it at 43.5 inches. Really amazed at how solid this club is. Incredibly solid feel, very long. I hit one of the best 3 woods off the deck into a par 5 this week to set up an eagle putt, and have hit numerous bombs off the tee. It is easy to work both ways. Tremendous club, can't say enough.
Date published: 2014-08-01
Rated 5 out of 5 by from Maltby's Got It Right I wanted to make a switch from the Tricept BM3 Forged Adjustable Fairway Woods - which I dearly love for their hot face and great balance, because the bottom runner technology doesn't cut it from the fairway or rough. Great off the tee, but nowhere else are they ideal. Regardless, decided to try these KE4 ST-F Woods and just love how they perform. Fantastic from the FW, ideal from light rough where the lower profile face gets the club head through. Fitted them with the MPF Distance Graphite Wood Shafts, and I hope I never need another FW Wood combination! The interchangeable weights make tuning the club a dream. Nice job, Ralph!
Date published: 2013-07-26
Rated 5 out of 5 by from KE4 ST-F FAIRWAY I PURCHASED THE 5 WOOD FOR MY DEMO RACK IN MY SHOP.I ASSEMBLED THE CLUB WITH A REGULAR FLEX SHAFT PURE DTX MIDSIZE GRIP. TOOK THE CLUB TO MY DRIVING RANGE AND WAS VERY IMPRESSED. ONE OF THE MOST SOLID HEADS I HAVE TRIED IN A LONG TIME. I WOULD REALLY LIKE TO SEE GOLFWORKS OFFER THE NEWER MODEL IN THE FAIRWAY DESIGN WITH THE DEEPER FACE ONLY KEEP THE WEIGHT SCREW REARWARD LIKE IT IS IN THIS MODEL TO BE ABLE TO FIT MORE GOLFERS. THIS IS A GREAT PRODUCT HIGHLY RECOMMEND THIS TO ANYONE WANTING A GREAT PERFORMING GOLF CLUB.
Date published: 2014-05-31
Rated 5 out of 5 by from Wonderful Bought the club pak and added hot melt. As a seasoned fitter/builder I've seen my share of 3 woods and typically it is one of the toughest clubs to get dialed in. No 3 we will be the best both from the fwy and tee. There is a fundamental compromise on one or the other to be optimal. The ST-F is as good as anything I've used off the deck. Accurate, easy, long. Fit the shaft, length, weight proper and it is absolute money. Really nice looking also. The hot melt makes it feel awesome too.
Date published: 2014-05-08
Rated 5 out of 5 by from Pure Awesomesauce This is the first Maltby product I have tried and my first club build and quite frankly I am blown away. If all the other products are as good as this 3 wood than I will have a bag full of Maltby sticks in the near future. The club is extremely easy to hit both off the tee and the turf. I built mine to reach par 5's in two but I'm starting to use it more and more off the tee on short par 4's. The 14* head gets up and launches high but it has a piercing trajectory. I am a high spin player and had ballooning issues with my other 3 wood but not with this club. In terms of feel and sound, it reminds me of the Callaway x hot woods. Seems to be about 10 yards longer than my other 3 wood but that could be due to the better spin numbers and 1/2 inch longer shaft. The footprint of the club is a little bigger than I anticipated but the face is very shallow. To me it looks like a Titleist wood that's been stretched out from front to back. Best 3 wood I've hit to date and I've tried every ma
Date published: 2013-11-25
  • y_2017, m_9, d_19, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_28
  • loc_en_US, sid_MA0228, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Can this be made in a 12 degree?

Asked by: Ike
No we do not manufacture the ST-F and ST-Fd fairway woods in 12 degree model.
Answered by: JimY
Date published: 2017-08-21

I have a standard shaft, weight 73g stiff at 46". I want to cut the shaft to 43" for 3w length and place in the KE4 ST F head. What swing weight will I be at? My driver swing weight is a D8. Should I order the weight kit and add more to the head? Thanks

Asked by: Luke Gray
My calculations show the swingweight to be in the C6 range with a 50 gram weight grip. The ST F comes with a 6 gram weight installed and changing to the 14 gram weight would bring the swingweight up to approximately D0. You will not get to D8 by just changing the sole weight with these specifications. You will need to use a shaft tip weight or other method to get to that swingweight.
Answered by: JimY
Date published: 2017-07-31

How many CCs on the ST-Fd? Thanks.

Asked by: vbhands
The KE4 ST-FD fairway woods cc measurements are as follows: 3d = 200cc 5d = 190cc 3 = 175cc 5 = 150cc
Answered by: JimY
Date published: 2017-07-31

I am interested Maltby KE4 ST-3d 3-wood - I already have the KE4 ST-2A 9.5 which has been great. I still hit it high. I would like a 3 wood with 13 degrees loft. How would I know if one was available before I order.

Asked by: Richard
In the MA0228 we have both the 3 and 3 deep heads in stock. The 3 deep should help you keep the ball flight a little lower. It has a higher more forward center of gravity to help keep the ball flight lower.
Answered by: JimY
Date published: 2017-07-31

Can this fairway wood be made in a 12 degree

Asked by: IHampton
No we do not manufacture this fairway wood in a 12 degree loft.
Answered by: JimY
Date published: 2017-06-07

do you have a 13 degree fairway wood head ?

Asked by: des
No, we do not offer a 13 degree fairway wood. You could request a hand pick with your order and we can sort to see if we can find a 14 degree that is actually 13 degrees. The manufacturing tolerance is +/- 1 degree from the listed spec of 14 degrees.
Answered by: JimY
Date published: 2017-05-26

I recently purchased a ST-Fd 3wd and 5wd. I really like the clubs but I am getting too much spin ( L to R) from them. I realize it's partially in the swing but if I add heavier weights would this decrease some of the spin?

Asked by: Mike6971
More then anything adding weight will change the feel of the club and it could help you pace and time your swing better and this could then help correct the left to right spin.
Answered by: JimY
Date published: 2017-04-17

Do you make a 17 deg fairway (4 wood)

Asked by: Mickey
No we do not make a 17 degree 4 wood in any of or fairway wood models.
Answered by: JimY
Date published: 2017-04-12
  • y_2017, m_9, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_46
  • loc_en_US, sid_MA0228, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks