Maltby KE4 Tour HDI Hybrids

Maltby KE4 Tour HDI Hybrids

KE4 Tour HDI Hybrid - H2 (19 degree) -
In Stock
KE4 Tour HDI Hybrid - H3 (21 degree) -
In Stock

Maltby KE4 Tour HDI Hybrids

Maltby KE4 Tour HDI Driving Iron Views

The Maltby KE4 Tour HDI hybrid design is probably closer to what a real hybrid should be vs. hybrid designs that are more influenced by metal wood shapes. With a low and deep center of gravity, a progressive wide sole design, adjustable head weighting and a very thin high strength forged MS300 face material. The HDI hybrid design is perfect for dialing in the exact distances and trajectories required by any type of player. Whether your looking for maximum distance or simply trying to replace those hard to hit long irons, you owe it to yourself to try one of these amazingly easy to hit KE4 Tour HDI hybrids. The KE4 Tour HDI hybrid also features a DBM (Diamonized Black Metal) finish that is chemically implanted and more wear, corrosion and scratch resistant than typical PVD finishes.

    KE4 Tour HDI Features

  • Hollow construction design with AST (Advanced Shell Technology) to insure mass and dimensional stability.
  • A very thin 1.85mm forged MS300 high strength steel face produces a high COR for increased ball speeds.
  • Design profile morphs more from a tradition iron design shape with added playability features above and beyond those only found in modern hybrid design shapes.
  • High MOI (moment of inertia) and progressive sole widths for added forgiveness.
  • Weight adjustable using any of our KE4 weight screws for endless shaft length and weight options.
  • Black DBM finish for the highest possible finish durability.
  • Available in 1H (17), 2H(19) and 3H(21).
  • Product Code - MA0231
  • Note: The HDI Hybrids Cannot be Adjusted for Loft and Lie

Not Found.

Would this particular club be better at standard length or trimmed to the proper length based on the players height?

Asked by: Oliver
We would always tell you to trim it to a length that best fits the player that is using it.
Answered by: JimY
Date published: 2017-02-02

If the weight is removed, is there access to the open cavity of the club head to add hot melt?

Asked by: Bcarp1423
Yes, if you remove the weight you can add hot melt in the hollow cavity.
Answered by: Brent Dill
Date published: 2016-08-24

Could the 2h be bent to 17* and a lie of 58*? I need that to fit my set and make it a 2 iron since my 3 iron is 20* and lie of 59*.

Asked by: smmaddalena
No the original HDI Hybrid iron (MA0231) is not adjustable for loft and lie. Do to the black coating if we try to adjust them they will break.
Answered by: JimY
Date published: 2016-06-27

What shaft lengths are recommended on these heads?   More like an iron or more like a hybrid/wood?

Asked by: DST
Lengths are based on head weights, ans to some degree shaft weights. Based on the head weights and assuming an 80 gram shaft and a 50 gram grip, recommended lengths would be 40.75 for the 1, 40.25 for the 2, 39.75 for the 3, 39.25 for the 4, 38.75 for the 5. At these lengths with these component weights, swing weights would be in the D1-D2 range. Length recommendations could vary depending on the shaft weight. Also, the length that is correct for you should be based on your abilities, stature, strength, etc.
Answered by: GW2002
Date published: 2016-05-20

Do you carry a 1 iron,  [ How much $$ ]  How do i order one ??

Asked by: Jon
We do carry a 1 HDI hybrid Iron. It is 17*. i will attach a link below to see the club and several options of paks for it.
Answered by: Brent Dill
Date published: 2016-05-05

Does this KE4 Tour HDI include the graphite shaft and head, as shown in the picture?

Asked by: Cliff
The Code MA0231 is for the clubhead only. We do offer club Paks for this product that include the head, shaft and grip that you can see at these links.
Answered by: JimY
Date published: 2015-11-17
  • y_2017, m_5, d_23, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_6
  • loc_en_US, sid_MA0231, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks