Maltby KE4  Tour HDI Hybrids

Maltby KE4 Tour HDI Hybrids


KE4 Tour HDI Hybrid - H4 (23 degree) -
$34.99
In Stock
KE4 Tour HDI Hybrid - H5 (25 degree) -
$34.99
In Stock

Maltby KE4 Tour HDI Hybrids

Maltby KE4 Tour HDI Hybrid Views

The new and improved Maltby KE4 Tour HDI hybrid design is probably closer to what a real hybrid should be vs. hybrid designs that are more influenced by metal wood shapes. With a low and deep center of gravity, a progressive wide sole design, adjustable head weighting and a very thin high strength forged MS300 face material (with the added bonus of being able to adjust loft and lie), the HDI hybrid design is perfect for dialing in the exact distances and trajectories required by any type of player. Whether your looking for maximum distance or simply trying to replace those hard to hit long irons, you owe it to yourself to try one of these amazingly easy to hit KE4 Tour HDI hybrids. The KE4 Tour HDI hybrid also features a DBM (Diamonized Black Metal) finish that is chemically implanted and more wear, corrosion and scratch resistant than typical black PVD finishes.

New and improved for 2014, the KE4 Tour HDI hybrids feature additional loft options, deeper etched scoring lines, a slightly longer hosel for increased bend-ability, triangle screw weights and improved cosmetics.

    KE4 Tour HDI Features

  • Hollow construction design with AST (Advanced Shell Technology) to insure mass and dimensional stability.
  • A very thin 1.85mm forged MS300 high strength steel face produces a high COR for increased ball speeds.
  • Body is precision cast from 1020C Carbon Steel.
  • Loft and lie adjustable (+/- 1 degree)
  • Design profile morphs more from a tradition iron design shape with added playability features above and beyond those only found in modern hybrid design shapes.
  • High MOI (moment of inertia) and progressive sole widths for added forgiveness.
  • Weight adjustable using any of our KE4 weight screws for endless shaft length and weight options.
  • Black DBM finish for the highest possible finish durability.
  • Available in 1H (17), 2H(19), 3H(21), 4H(23) and 5H(25).
  • Product Code - MA0238
  • Available Spring 2014

Maltby KE4 Tour HDI Hybrids is rated 4.8 out of 5 by 12.
Rated 5 out of 5 by from Finally switched to a 3 iron hybrid I finally replaced the 3 iron that I had recently had trouble getting a consistent distance with. I bought one of these heads and fitted it with a DG X100 shaft to match my irons. Absolutely a great move to go to this club. I'll likely buy the 4 iron as well. Very easy to hit. Ball goes high off the club face with the 220 yds I'm used to out of a 3 iron.
Date published: 2014-06-06
Rated 5 out of 5 by from Probably the best HDI ever - Better than Ping G It's a shame these are being discontinued, they're an absolutely phenomenal club. Great as a driving iron or off the fairway - Works well with an iron shaft or a hybrid shaft, steel or graphite and the flight is sooooo good. Put a 3 HDI against the ping G crossover - no contest. Flew 5 yards farther, landed nice and soft, and for the price difference, it's just a no-brainer. Wish they would bring these back, at least in the 1 and 2 only. After building the last one i had, guys have seen it and are clamoring for them as driving irons.
Date published: 2017-02-21
Rated 5 out of 5 by from great club i picked up a 17* head with a Xcaliber hybrid shaft ! half inch tip trim , played a round with it yesterday hits straight and long !!!!!!!!!! great job guys thanks . wayne from Par-done golf
Date published: 2014-09-24
Rated 5 out of 5 by from Don't eliminate this Beautiful design! I recently sold my Titleist AP2'S and had Golf Works fit me for a set of the DBM forged irons which perform much better than my AP2's. I too, needed either a 5 wood or hybrid and went with this KE4 tour hdi 2H. It rockets off the Face! I was told today that I purchased 1 of the last heads available. Golf Works, keep making a few of these heads! There is people like me that love it and will be promoting this beautiful club to friends I play with!
Date published: 2016-09-27
Rated 5 out of 5 by from Finally switched to a 3 iron hybrid I finally replaced the 3 iron that I had recently had trouble getting a consistent distance with. I bought one of these heads and fitted it with a DG X100 shaft to match my irons. Absolutely a great move to go to this club. I'll likely buy the 4 iron as well. Very easy to hit. Ball goes high off the club face with the 220 yds I'm used to out of a 3 iron.
Date published: 2014-06-06
Rated 5 out of 5 by from Great Clib I needed a club that I could use to find fairways on tight holes. I picked up the Tour HDI 3 Hybrid, and I couldn't be happier. I hit the club fairly long, but more importantly my miss hits are not penalized nearly as much as other clubs I have used. I will suggest this club to anybody for an easy to hit, straight club. Highly recommended.
Date published: 2015-07-16
Rated 5 out of 5 by from Easy to hit I bought a 4-iron head to replace my Maltby TE forged 4-iron. Similar length and trajectory, but so much easier to hit. Excellent product.
Date published: 2016-04-27
Rated 5 out of 5 by from Easy to hit long iron. This is the easiest long iron that I have ever used. I bought the 1 iron, but may get the 3 and 5.
Date published: 2016-03-06
  • y_2017, m_9, d_25, h_19
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_12
  • loc_en_US, sid_MA0238, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Do you ever have the One Hybrid available - 17 degree loft with 59 degree lie angle in the Maltby KE4 Tour HDI??

Asked by: Bmer310
No, we have discontinued the Tour HDI Hybrid irons and have sold out of the 17 degree #1.
Answered by: JimY
Date published: 2017-08-28

Is the Maltby KE Tour HDI Hybrids also available in a left handed version? I'm looking for such a club like these.

Asked by: MP2804
No, we never made the KE4 Tour HDI Hybrid irons in left hand. The right hand model is being discontinued.
Answered by: JimY
Date published: 2017-07-31

What is the recommended ferrule for these clubs?

Asked by: Golfnut48
The 60PI .500" length .370 Black is the most common ferrule used for this hybrid. If you prefer a shorter ferrule, you can use the 59PI, which is .250" in length.
Answered by: GW2002
Date published: 2017-05-22

Why are these being discontinued.  It seems like a lot of people really like them.  I prefer irons over woods, and think this would be great in the bag

Asked by: Derek
We discontinued these because they did not sell well. We had good feedback from them but they just did not sell well enough for us.
Answered by: JimY
Date published: 2017-04-07

Please recommend a few options in a quality regular flex graphite shaft in black, grey, or silver that would pair well with the KE4 HDI hybrid irons.

Asked by: Joe
The Kuro Kage Black 2nd Gen hybrid shaft we offer in this Club Pak for this club matches up well and could work well. http://www.golfworks.com/maltby-ke4-tour-hdi-hyrbid-pak-mrc-kuro-kage-black-2nd-gen/p/PMA0238HBP/ The new UST IROD Hybrid (US0098) could also be a good choice. http://www.golfworks.com/ust-mamiya-irod-75-85-graphite-hybrid-shafts/p/US0098/ The Aldila Rogue Black Hybrid 85 (AL0049) http://www.golfworks.com/aldila-rogue-black-graphite-hybrid-shafts/p/AL0049/ The Xcaliber Pro Hybrid (AS0047) http://www.golfworks.com/axe-xcaliber-pro-hybrid-graphite-shafts/p/AS0047/ Any of these shafts could match well with the HDI Hybrid. It just depends on which one might best fit the specifications you need.
Answered by: JimY
Date published: 2016-10-10

Does the screw come out and powder go in

Asked by: Alan
the screw is a weight to fine tune your swingweight. These are offered in 2,4,6,8,10,12 and 14 grams. A 6 gram screw comes pre installed in the club.
Answered by: Brent Dill
Date published: 2016-08-19

Hi Jim, is it just the 17 degree (1H) that's being discontinued or is the whole line being refreshed for next year?

Asked by: housefamous
They are all marked as discontinued and at this time I have not been told if they will be refreshed for next year.
Answered by: JimY
Date published: 2016-06-27

Is the 17* head still available?

Asked by: DrRon
The 1H is sold out and these are being discontinued.
Answered by: JimY
Date published: 2016-06-20
  • y_2017, m_9, d_25, h_19CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_19
  • loc_en_US, sid_MA0238, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks