Maltby MMB-17 Forged Iron Heads

Maltby MMB-17 Forged Iron Heads

MMB-17 Forged Iron Head - #3 Iron
In Stock
MMB-17 Forged Iron Head - #4 Iron
In Stock
MMB-17 Forged Iron Head - #5 Iron
In Stock
MMB-17 Forged Iron Head - #6 Iron
In Stock
MMB-17 Forged Iron Head - #7 Iron
In Stock
MMB-17 Forged Iron Head - #8 Iron
In Stock
MMB-17 Forged Iron Head - #9 Iron
In Stock
MMB-17 Forged Iron Head - Pitching Wedge
In Stock
MMB-17 Forged Iron Head - Gap Wedge
In Stock

Maltby MMB-17 Forged Iron Heads

MMB-17 Forged Iron Views

  • Satin chrome anti glare finish.
  • Progressively designed “Blade” optimizes shot trajectories from the long irons to the short irons
  • “Weight relief pocket” and inverted muscle design in 3 thru 7 iron allow for correct c.g. location to maximize playability
  • Tungsten toe weighting in the long irons (3,4,5) further improves stability and forgiveness
  • Traditionally designed short irons (8 thru PW,GW) provide the “controlled” trajectories preferred by better players
  • Offset and top line designed to appeal to purists wanting a traditional, solid appearance at address
  • MG (multi-groove) U-Groove Technology improves consistency in trajectory and spin.
  • Manufactured from 8620 Carbon Steel for soft feel and adjustability
  • Conforms to the rules of golf
  • Recommended ferrule – 74PI
  • Product Code = MA0226

Maltby MMB-17 Forged Iron Heads is rated 4.9 out of 5 by 22.
Rated 4 out of 5 by from Great Clubs I have had two sets of Maltby MMB's. I had the original MMB's that were stolen along with my car and got the MMB-17's as the replacement set. I originally played a Honma PP 727 muscle back blade. The play-ability with these clubs is awesome. I can work the ball, well as much as balls allow you to these days. Additionally, they perform well in all conditions and are extremely forgiving with off center shots. Because they perform so well you don't get the same shocking feedback you would with traditional blades, but that is why you bought these right? My only complaint is the top line is double the size of my pp-727's and are also bigger than my old MMB's (still have the 5 iron, wasn't in the bag when stolen). If it came with a smaller top-line they would be a 10, right now I give them an 8.75 for that reason alone.
Date published: 2015-12-06
Rated 5 out of 5 by from Great golf head I bought a 6 iron head as a test to see if the club would be a good fit for my swing and game. I assembled the club with True Temper Dynamic Gold S300 shafts and did a 16 gram butt counter weight to bring the swing weight down. The first hit was amazing. Straight and on line. I didn't feel the ball leave the club face. I went to a fitting a week later and honed my specs for building the rest of the set. I think I sold the golftec fitter on the clubs. I am in the process of ordering the rest of the club heads to fill out my new set. Can't wait to get them built and use them on my round of golf.
Date published: 2016-11-12
Rated 5 out of 5 by from A True Value Proposition! After getting spoiled by the classic lines and great feel of a major brand forged MB blade I purchased for grins to practice with, I started a search to find something more forgiving and more affordable that shared those classic lines and great feel. The MMB-17 fits that bill to a 'T'! It's a beautiful club, great looking at address, and surprisingly forgiving for a blade design. And that feel on a flush strike! Butter! These irons make me wonder why people pay 3x more for the 'brand names'!
Date published: 2016-10-20
Rated 4 out of 5 by from Great clubs but maybe a slight adjustment Great clubs, have had these fitted with KBS Tour and they are great. If I ever where to advice a change to this clubhead it would be to make the top line the same as the TE`s and the same with the offset. That would make it look even more like a real players club and probably still keep most of it MPF points..? A great iron for most golfers
Date published: 2013-06-23
Rated 5 out of 5 by from Excellent product Heads feel great, nice soft feeling at impact. I'm able to work the ball both ways consistently and they are nice and forgiving. The weight relief in the long irons helps get the ball up in the air nicely. Even on off center hits, I dont feel like I'm losing a tremendous amount of distance. Awesome clubs!
Date published: 2015-01-20
Rated 5 out of 5 by from Great Irons Great Iron. Got them with the TT Dynamic Gold shaft in 7-GW paired with 4-6 TE irons. Top lines are little different, but swing weight, lofts and feel matches perfectly. Was looking for a progressive set and built my own. Soft feel, consistent yardages - great clubs - very, very happy.
Date published: 2015-03-03
Rated 5 out of 5 by from Very live I had to wait for these but I am glad I did. Initially I did not like them, but after getting the lie set correctly I am hitting them straight and consistently getting 5-10 extra yards throughout the set. Mis-hits do not penalize me any more than my previous clubs, and a hit in the center of the face feels effortless. I love the clean lines of this club.
Date published: 2013-07-31
Rated 5 out of 5 by from Awesome clubs I normally do not write reviews. I bought these on a whim after having major shoulder surgery. I hit them yesterday for the first time and was amazed. I haven't played in 5 months and pulled out the 3 iron on the first tee and git it 250 right down the middle. My distance is the same and the forgiveness is perfect for this type of iron. I may buy another set of heads for when they discontinue these irons! I am a 5 handicap and I compare these Mizuno.
Date published: 2016-10-15
  • y_2018, m_1, d_17, h_9
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_22
  • loc_en_US, sid_MA0226, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What is the hosel/tip size? are these legal/approved?

Asked by: Rob
The MMB-17 irons are a .370" hosel bore and yes the grooves are USGA conforming.
Answered by: JimY
Date published: 2017-12-11

Will these mmb 17 irons be going into 2018 , will there be a new set of blades ?

Asked by: Tony p
Yes the MMB-17 irons will continue into 2018. At this time we have no new blade designs in the works for 2018.
Answered by: JimY
Date published: 2017-11-01

What the hosel diameter for this head?

Asked by: Manny
The MMB-17 irons are a .370" hosel diameter.
Answered by: JimY
Date published: 2017-12-18

Do these heads also come in left hand and if so there is no option to pick what hand you want

Asked by: JR23
No we do not manufacture the MMB-17 iron in a left hand model.
Answered by: JimY
Date published: 2017-09-18

I am interested in buying these to replace (or create a mixed set with) my TE forged irons.  Can you estimate swingweight if they are built at men's standard length (37.75" 5-iron), with FST 90 shafts and a 50 gram grip?  Thanks.

Asked by: JKfromBL
When I calculate this swingweight it comes up in the C7 swingweight range.
Answered by: JimY
Date published: 2017-09-05

I am interested in putting DG AMT R300 shafts in these iron heads. What would be the swingweight with standard men's length with 50 gram grips?

Asked by: Jason
At our standard length, 37.75" on a 5 iron with a 50 gram grip it comes in in the C8 to C9 swingweight range with the DG AMT R300.
Answered by: JimY
Date published: 2017-08-23

I want a heavy iron head

Asked by: Chaz
How heavy? We run most of our iron head weights the same and some of them do have adjustable weights that allow you to add more weight. If you can tell me how heavy you want your iron head weights to be I can give you a more definite answer.
Answered by: JimY
Date published: 2017-06-05


Asked by: Fred
.355" taper tip shaft would have to be shimmed to properly fit the MMB-17 iron heads. Our SHIMT (.355" - .370")shim works well for this installation.
Answered by: JimY
Date published: 2017-05-08
  • y_2018, m_1, d_18, h_9CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_99
  • loc_en_US, sid_MA0226, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks