Maltby MMB-17 Forged Iron Heads

Maltby MMB-17 Forged Iron Heads


MMB-17 Forged Iron Head - #3 Iron
$32.99
In Stock
MMB-17 Forged Iron Head - #4 Iron
$32.99
In Stock
MMB-17 Forged Iron Head - #5 Iron
$32.99
In Stock
MMB-17 Forged Iron Head - #6 Iron
$32.99
In Stock
MMB-17 Forged Iron Head - #7 Iron
$32.99
In Stock
MMB-17 Forged Iron Head - #8 Iron
$32.99
In Stock
MMB-17 Forged Iron Head - #9 Iron
$32.99
In Stock
MMB-17 Forged Iron Head - Pitching Wedge
$32.99
In Stock
MMB-17 Forged Iron Head - Gap Wedge
$32.99
In Stock

Maltby MMB-17 Forged Iron Heads

MMB-17 Forged Iron Views

  • Satin chrome anti glare finish.
  • Progressively designed “Blade” optimizes shot trajectories from the long irons to the short irons
  • “Weight relief pocket” and inverted muscle design in 3 thru 7 iron allow for correct c.g. location to maximize playability
  • Tungsten toe weighting in the long irons (3,4,5) further improves stability and forgiveness
  • Traditionally designed short irons (8 thru PW,GW) provide the “controlled” trajectories preferred by better players
  • Offset and top line designed to appeal to purists wanting a traditional, solid appearance at address
  • MG (multi-groove) U-Groove Technology improves consistency in trajectory and spin.
  • Manufactured from 8620 Carbon Steel for soft feel and adjustability
  • Conforms to the rules of golf
  • Recommended ferrule – 74PI
  • Product Code = MA0226

Maltby MMB-17 Forged Iron Heads is rated 4.9 out of 5 by 20.
Rated 4 out of 5 by from Great Clubs I have had two sets of Maltby MMB's. I had the original MMB's that were stolen along with my car and got the MMB-17's as the replacement set. I originally played a Honma PP 727 muscle back blade. The play-ability with these clubs is awesome. I can work the ball, well as much as balls allow you to these days. Additionally, they perform well in all conditions and are extremely forgiving with off center shots. Because they perform so well you don't get the same shocking feedback you would with traditional blades, but that is why you bought these right? My only complaint is the top line is double the size of my pp-727's and are also bigger than my old MMB's (still have the 5 iron, wasn't in the bag when stolen). If it came with a smaller top-line they would be a 10, right now I give them an 8.75 for that reason alone.
Date published: 2015-12-06
Rated 5 out of 5 by from Great golf head I bought a 6 iron head as a test to see if the club would be a good fit for my swing and game. I assembled the club with True Temper Dynamic Gold S300 shafts and did a 16 gram butt counter weight to bring the swing weight down. The first hit was amazing. Straight and on line. I didn't feel the ball leave the club face. I went to a fitting a week later and honed my specs for building the rest of the set. I think I sold the golftec fitter on the clubs. I am in the process of ordering the rest of the club heads to fill out my new set. Can't wait to get them built and use them on my round of golf.
Date published: 2016-11-12
Rated 4 out of 5 by from Great clubs but maybe a slight adjustment Great clubs, have had these fitted with KBS Tour and they are great. If I ever where to advice a change to this clubhead it would be to make the top line the same as the TE`s and the same with the offset. That would make it look even more like a real players club and probably still keep most of it MPF points..? A great iron for most golfers
Date published: 2013-06-23
Rated 5 out of 5 by from Very live I had to wait for these but I am glad I did. Initially I did not like them, but after getting the lie set correctly I am hitting them straight and consistently getting 5-10 extra yards throughout the set. Mis-hits do not penalize me any more than my previous clubs, and a hit in the center of the face feels effortless. I love the clean lines of this club.
Date published: 2013-07-31
Rated 5 out of 5 by from Excellent product Heads feel great, nice soft feeling at impact. I'm able to work the ball both ways consistently and they are nice and forgiving. The weight relief in the long irons helps get the ball up in the air nicely. Even on off center hits, I dont feel like I'm losing a tremendous amount of distance. Awesome clubs!
Date published: 2015-01-20
Rated 5 out of 5 by from Great Irons Great Iron. Got them with the TT Dynamic Gold shaft in 7-GW paired with 4-6 TE irons. Top lines are little different, but swing weight, lofts and feel matches perfectly. Was looking for a progressive set and built my own. Soft feel, consistent yardages - great clubs - very, very happy.
Date published: 2015-03-03
Rated 5 out of 5 by from A True Value Proposition! After getting spoiled by the classic lines and great feel of a major brand forged MB blade I purchased for grins to practice with, I started a search to find something more forgiving and more affordable that shared those classic lines and great feel. The MMB-17 fits that bill to a 'T'! It's a beautiful club, great looking at address, and surprisingly forgiving for a blade design. And that feel on a flush strike! Butter! These irons make me wonder why people pay 3x more for the 'brand names'!
Date published: 2016-10-20
Rated 5 out of 5 by from Awesome clubs I normally do not write reviews. I bought these on a whim after having major shoulder surgery. I hit them yesterday for the first time and was amazed. I haven't played in 5 months and pulled out the 3 iron on the first tee and git it 250 right down the middle. My distance is the same and the forgiveness is perfect for this type of iron. I may buy another set of heads for when they discontinue these irons! I am a 5 handicap and I compare these Mizuno.
Date published: 2016-10-15
  • y_2017, m_6, d_25, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_20
  • loc_en_US, sid_MA0226, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I want a heavy iron head

Asked by: Chaz
How heavy? We run most of our iron head weights the same and some of them do have adjustable weights that allow you to add more weight. If you can tell me how heavy you want your iron head weights to be I can give you a more definite answer.
Answered by: JimY
Date published: 2017-06-05

WILL THESE HEADS ACCEPT .335 TAPER TIP GRAPHITE SHAFTS?

Asked by: Fred
.355" taper tip shaft would have to be shimmed to properly fit the MMB-17 iron heads. Our SHIMT (.355" - .370")shim works well for this installation. https://www.golfworks.com/the-golfworks-brass-adaptor-shims/p/SHIM/
Answered by: JimY
Date published: 2017-05-08

I just read a comment on one of the reviews for this head, and it stated that production of these is going to stop?  Is there any truth to this?  The comment was from 2 years ago, so maybe there was a rumor or something.

Asked by: Jason
We are continuing with the MMB-17 model. Production is not stopping. We have added a black Diamonized Black Metal finish to offering that is now in stock (sets only). So we have the brushed satin finish option and the black finish option.
Answered by: GW2002
Date published: 2017-05-12

Any updates on delivery of the MMB-Blacks?

Asked by: Beau Tech Golf
They are here. We have to get them checked in and packaged into sets and hopefully will have them available to ship by the end of this week. (April 7th)
Answered by: JimY
Date published: 2017-04-03

I see in your latest catalog that there is an MMB 17 Black Limited Edition. My question is when will they be available via the website and will there be a Dynamic Gold Premium Pack offering?

Asked by: Michael Constantine
The MMB 17 Black irons actually arrived today. They will be entered into stock tomorrow (4-1) or at the latest Monday (4-3). You can order the MMB 17 Black - DG Pak here: https://www.golfworks.com/maltby-mmb-black-iron-pak-true-temper-dynamic-gold/p/PMA0283DG/
Answered by: Admin
Date published: 2017-04-01

What would be the approximate swingweight with these heads paired with project x 6.5 shafts and golf pride multicompound grips in standard size. Thank you

Asked by: Kyrazzy
At Men's standard club length (based on a 38" playing length for a 5 iron), the swing weight should be around D2.
Answered by: GW2002
Date published: 2017-03-17

Can you bend the MMB-17 up 2 to 2.25 degrees for me prior to shipment?

Asked by: Esteban
Yes these can be bent prior to shipping. There is an additional charge of $4.95 per club for this service. We will bend to a maximum of 2 degrees for loft and lie.
Answered by: JimY
Date published: 2017-05-16

I'm building a mmb-17 demo 7iron at standard length with a tour velvet grip and fst125 pro shaft tipped between S & X. Can you estimate the swing weight for me?

Asked by: Kess
My calculations show it should come up in about C8 range. We reference 36.75" for a standard length steel shafted 7 iron. https://www.golfworks.com/images/art/StdLengths.pdf
Answered by: JimY
Date published: 2017-03-21
  • y_2017, m_6, d_27, h_4CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_93
  • loc_en_US, sid_MA0226, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks