Maltby MPF Graphite Hybrid Shaft

Maltby MPF Graphite Hybrid Shaft

A Flex 42" - .370 tip (76g) 2B3M
In Stock
R Flex 42" - .370 tip (78g) 3B2M
In Stock
S Flex 42" - .370 tip (80g) 4B2M
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Maltby MPF Graphite Hybrid Shaft

  • Tip structure and design provide stability and consistency
  • Designed for the mid to low handicap player seeking more distance and control.

Trimming Instructions


Maltby MPF Graphite Hybrid Shaft is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Nice distance and trajectory I re-shafted my old TM Rescue Mid 4-H with the A-Flex Maltby MPF Graphite Hybrid shaft. Ball trajectory is higher, distance is longer, and the softer shaft also has a lighter, more lively feel.
Date published: 2017-10-13
  • y_2018, m_1, d_19, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_MA0250, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I am looking for a regular flex low kick point graphite shaft for a Cleveland Halo Hybrid club. What do you recommend? An in expensive one. Thank You.

Asked by: Jack 1
The UST dhi Hybrid (US0083) is designed for a mid/high trajectory and is a good inexpensive shaft. The Aldila Value Series Hybrid (AL0029) is also designed for a mid/high trajectory and a good inexpensive shaft. Both would work with the Cleveland Halo Hybrids.
Answered by: JimY
Date published: 2017-10-25

1.Purchased this shaft in stiff flex for Adam IdeaTech V3 2 Hybrid(16 degree loft). Do I need to trim it from tip or butt ? i have read that club size is 42.25". Is there any advantage in purchasing a fairway wood of 13 degree loft if i have this Hy.

Asked by: Sabu
Using the MPF Series Hybrid shaft you would cut 0" from the tip end. You would install the shaft and cut from the butt end to your 42.25" finished length. More then likely you would hit a 13 degree fairway wood further then this hybrid. It can vary from one player to the next.
Answered by: JimY
Date published: 2017-09-11

I want to order Maltby MPF Hybrid Shaft in R flex for 5 hybrid (to match my irons) but it shows "backordered". Would I be better off getting S flex and install un-tipped or A-flex tipped extra 1-2" ? I play S flex in my driver and woods and R in irons.

Asked by: Sam
If you take the S flex and tip trim it 1" less then what is recommended it will play closer to the R flex. With the A flex you would have to tip trim 1" more then what is recommended but the A flex also has a higher torque rating and is designed to create a mid/high ball flight compared to the mid ball flight of the R and S flexes. We have the R flex shafts in stock here in the US and ship to GolfWorks Canada on a regular basis. You might want to check with GolfWorks Canada to see when they expect to have these in stock.
Answered by: JimY
Date published: 2017-06-06

Will the MPF Hybrid shaft fit MIZUNO 2016 Fly Hi Hybrids ? second time asking this question, last reply was for "cobra". please see below

Asked by: frogdoc
If it is the JPX Fli Hi then it should used a .370" tip size shaft and the MPF Hybrid shaft will fit.
Answered by: JimY
Date published: 2017-05-11

will Maltby MPF hybrid shafts fit into 2016 Mizuno Fly Hi hybrids ?

Asked by: frogdoc
The Cobra hybrids take a .370 shaft and the MPF H-Series Hybrid shafts are a .370 tip, so they will work.
Answered by: GW2002
Date published: 2017-05-03

Jim, I want you to confirm the "trim code" instructions for a 5 Hybrid using the MPF "S" flex shaft. I read page 69 trim code instructions to specify 1" from tip, and 40" shaft length - am I correct?

Asked by: Les
If you are assembling to a 40" finished length then yes you would want to tip trim 1".
Answered by: JimY
Date published: 2017-04-24

I have an Alpha #6 Hybrid with an Alpha Luxe (60) 360 frequency calibrated Supernano 560 shaft in it, do you know what flex this is? The shaft is too stiff for me, I think I need an A flex what would you suggest as a replacement?

Asked by: jrob
In looking at Alpha Golfs web site I do not see the Luxe (60) hybrid shaft listed. The 60 tells me it is a 60 gram weight shaft. A frequency number of 360 would generally translate into a stiffer shaft. To stay in the 60 gram weight range a shaft like the Xcaliber Tour SL (AS0032) in the A flex could work well.
Answered by: JimY
Date published: 2017-04-17

what shaft do you recommend to replace original shaft from Callaway X series 4 Hybrid

Asked by: dunndone
The X Hybrids had a mid 80 gram .350" tip diameter Callaway graphite shaft. We do not have any .350" tip diameter hybrid shafts. You will have to use a .335" shaft and the BB9002 adapter to for proper installation. The only .335" tip diameter hybrid shaft we offer is the UST ProForce V2 Hybrid (US0013H). It is a mid 70 gram weight shaft with similar playing characteristics.
Answered by: JimY
Date published: 2016-12-22
  • y_2018, m_1, d_19, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_MA0250, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks