Maltby TE Forged Irons

Maltby TE Forged Irons


TE #3 Iron - 22 degree - Universal Bore (RH)
$28.99
In Stock
TE #4 Iron - 24 degree - Universal Bore (RH)
$28.99
In Stock
TE #5 Iron - 27 degree - Universal Bore (RH)
$28.99
In Stock
TE #6 Iron - 31 degree - Universal Bore (RH)
$28.99
In Stock
TE #7 Iron - 35 degree - Universal Bore (RH)
$28.99
In Stock
TE #8 Iron - 39 degree - Universal Bore (RH)
$28.99
In Stock
TE #9 Iron - 43 degree - Universal Bore (RH)
$28.99
In Stock
TE #PW - 47 degree - Universal Bore (RH)
$28.99
In Stock
TE #GW - 51 degree - Universal Bore (RH)
$28.99
In Stock
OR

Buy The Complete Set

Product Name
Price
Qty
TE FORGED IRON SET (RH) - #3-PW
$231.92

Maltby TE Forged Irons

Maltby TE Forged Iron Views New for 2010, the Maltby M-Series Tour Edition Forged Irons replace the popular MTF Forged Irons. The Tour Edition Forged Iron club head has been developed based on customer request for a traditional cavity back design with less graphics. The exceptionally clean look of the M-Series TE irons along with a traditional blade profile appeals to the better players and traditionalist looking for more forgiveness. The TE Forged irons are the result of a tireless five step forging process that starts with a raw billet of 1035 carbon steel and through a series of 5 different forging dies and multiple heat treating process’ creates an incredibly precise finished head requiring very little surface grinding. Typical forged cavity backs only utilize one forging die and have to be hand ground into the final shape and head weight, causing inconsistencies in every clubs specifications from one club to the next. By optimizing the center of gravity position, the Maltby TE Forged irons offer Super Game Improvement playability, combined with the exceptional feel and look of a true forged, players cavity iron.

  • Five-step true forging process provides unparalleled quality and playability.
  • 1035 Carbon Steel provides a soft, solid feel and allows for easy adjustability.
  • Traditional blade profile appeals to better players and traditionalist while maintaining a high playability.
  • Cavity back design concentrates weight around the perimeter and low, yielding a very forgiving “players” club.
  • Mirror, nickel chrome finish enhances feel and enhances the clean, traditional appearance.
  • Blended leading and trailing edges of the sole will not snag.
  • Universal hosel bore diameter allows for .355" and .370" tip shafts
  • Available #3 - PW, GW
  • Conforms to the rules of golf
  • RH only
  • Recommended golf ferrule – 74PI
  • Product Code = MA0099

Maltby TE Forged Iron Clubhead Specifications

Maltby TE Forged Irons is rated 4.9 out of 5 by 75.
Rated 5 out of 5 by from Great clubs! First off, these came with stickers giving the weight to within .1 gram, very cool. Secondly, the catalog and internet do not do these clubs justice. They are beautiful looking heads. I actually thought they were kind of ugly on the internet but wanted them anyway for the constant offset and high playability but once I saw them I was impressed. Finally,I assembled with Rifle 4.5 and tried a rudimentary M.O.I. match. The results have been wonderful and have carried over from the range to the course, actually better performing on the course! Congratulations on a great set; I anticipate buying another set just like it because they are that good!
Date published: 2013-01-28
Rated 4 out of 5 by from Personalized option I have a set of older AP1s (TT steel shafts) and was experimenting with the Maltby irons for my travel set. Bought TE Pitching wedge and a MMB-17 5 iron. I put the same Fujikura graphite shaft on both and tried them out at Top Golf. The TE feels identical to my AP1s, distance about same adjusting for angle and shaft length - is longer and club face angle a little steeper on my AP1 PW. The MMB-17 definitely has a smaller "sweet" spot. However, it doesn't seem to affect my distance dramatically, and I kind of like the feedback/reminder to aim a little on the inside of the club face as I have a tendency to miss hit near the toe.
Date published: 2017-02-10
Rated 5 out of 5 by from Great clubs! First off, these came with stickers giving the weight to within .1 gram, very cool. Secondly, the catalog and internet do not do these clubs justice. They are beautiful looking heads. I actually thought they were kind of ugly on the internet but wanted them anyway for the constant offset and high playability but once I saw them I was impressed. Finally,I assembled with Rifle 4.5 and tried a rudimentary M.O.I. match. The results have been wonderful and have carried over from the range to the course, actually better performing on the course! Congratulations on a great set; I anticipate buying another set just like it because they are that good!
Date published: 2013-01-28
Rated 5 out of 5 by from Great Forged Head For $25 a head you cannot beat the quality, look and feel of these irons. Just a plain and simple forged cavity back with hardly any offset no gimmicks or misleading marketing. They feel great, can be bent however you like and very well made. The also look great! simple and classy. These are superior in quality to most anything the general public can get (non professional club makers). I had a 7iron made up by golfworks (great work by the way) and can't be happier, I will probably get a whole set.
Date published: 2015-01-25
Rated 5 out of 5 by from Perfect club I'm one of those golf fans who has played more clubs than I should have. Mizuno were by far my preference before I met Mr. TE Forged. I had been playing on any given day MP-32/60 combo or MP37. I'm really not consistent enough to play those clubs so I tried the Nike VR Forged. While they are no doubt long they were a bit too chunky in appearance for me and I just couldn't get comfortable with the 7-9 irons in particular. I demoed and loved the newest AP2 as well as the MP54 and JPX Pro. The problem with those three sets is I don't like paying that much for golf clubs. I'd rather spend it on my son or my wife. I am a golf blog junkie who rarely comments but always researches. After hearing much fanfare of the Maltby brand I dug a little deeper into their forged offerings. I bought a set of MMB used, and although I liked them and think they are fantastic clubs in their own right, they were just a little to long in their profile for me. I decided to swap out my 5 and 6 iron MP60 with a TE 5 and 6 to give Maltby another shot since I read the TE is a little more compact in length. Let me tell you that the minute I opened the box containing the 5 and 6 iron I went to the website and ordered the 7-Gap. These clubs ooze classy and beg to be swung the minute you lay eyes on them. The results on the range were immediately what I had felt the first time I pured one of my old mizzys. The funny thing is on the next shot I missed toward the toe considerably and figured for sure the ball would land 40 plus yards short and right of target. To my pleasure and surprise the ball traveled only 15 yards short (6 iron) on a rather poor swing that I know for a fact any other club I own would have had atrocious results. Even the shots which I hit a little thin traveled at the target and had enough steam to put me in a workable situation on my next shot. My other clubs no doubt would have left me with dribblers. I paired the heads with the Score LT shaft which is a perfectly acceptable combo but I do wish I would have gone stiff rather than regular as I'm getting some dispersion to the right. That's my fault however as I mistakenly ordered regular. Anyway, long story short, best club I've owned and at an unbeatable price. I'll never buy another brand/model of irons. Period.
Date published: 2014-10-02
Rated 5 out of 5 by from TE irons remind me of Ben hogan apex Bought these irons with S300 dyn gold shafts after taking a club making class there at golf works. I am a Ben Hogan iron fanatic. These irons have a great look and balanced feel. When you hit the sweet spot the feeling is awesome. Great distance and a much higher playability rating than my Hogans with that same wonderful sweet spot! For your Hogan fans you know exactly what I am talking about. Great job golfworks team on these irons.
Date published: 2012-11-24
Rated 5 out of 5 by from Very forgiving--and beautiful I had been playing with Ping i20s and steel shafts. But I've had some shoulder problems and thought the steel shafts might be part of the problem. So I bought these Maltby TE heads and built them with Arthur Xtreme graphite shafts (also from Golf Works). The shoulder problem is much improved. That's probably due to the graphite shafts. But these heads are great. They are very forgiving--even more than my Pings. Easy to work, with gentle fades or draws (couldn't do that with the Pings!). And the simple lines and no clutter make them some of the nicest looking heads around. I plan on playing these for a long time.
Date published: 2017-01-03
Rated 5 out of 5 by from a hidden gem I paired these with rifle precision shafts with red ferrules and red mcc plus 4 grips. I only played 1 round so far but they are the real deal for me. Easy to hit, my yardage is off a lil bit, but longer due to lighter shafts. I may another set
Date published: 2016-11-03
  • y_2017, m_9, d_18, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_75
  • loc_en_US, sid_MA0099, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Having a lot of trouble removing shaft from this head, .370 tip dia. What heat do you guys recommend to heat it up with? Up to what temp? What type of epoxy do you guys use? I'm no hulk but I had no issues with other clubs baefore

Asked by: Alex
With a steel shaft installed we would use a Propane Torch and it takes approximately 15 to 20 seconds of heating to be able to remove the clubhead from the shaft. They should then come off easily. If you use a heat gun or butane torch it could take 2 minutes of heating to get hot enough to remove the head from the shaft. You can use the heat gun or butane torch. They just take longer. We use the Tour Set Plus Epoxy (TSPE) for assembling these irons in house.
Answered by: JimY
Date published: 2017-09-11

Too flat for me, I'd like to bent the hosels 4 degree, upright. Heads are tolerable? Or too risky?

Asked by: James77july
We limit adjustments to 2 degrees. Even though these are a forged iron there is a chance of cracking the chrome or putting a crease into the clubhead.
Answered by: JimY
Date published: 2017-09-05

Are these club heads designed with an ideal or "standard" playing length in mind? Or does it depend on the shaft? E.g. is the 6 iron designed to be played at 37.5", and lengthening or shortening the shaft will affect how the club is designed?

Asked by: Devon
The optimum playing length is determined by the club manufacture and club manufactures do not use the same finished length for their different model 6 irons. We design our clubhead weights to accommodate different playing lengths and different shaft weights to be able to keep swingweights in a normal range at our standard lengths. You can see our standard lengths at this link. https://www.golfworks.com/images/art/StdLengths.pdf 37.5" would be the most common finished length for a steel shafted 6 iron for most of the manufactures. The 38.5" shaft is the 6 iron shaft and would play true to it's flex at 37.5" finished length and a swingweight in the D2 range. If you put the 38.5" 6 iron shaft into a 5 iron and cut it to a 5 iron length the shaft would play stiffer and if you put this shaft into a 7 iron and cut it for a 7 iron length it would play more flexible. Shafts are made to longer raw lengths to accommodate players who need longer length clubs and to accommodate different clubhead designs with different hosel lengths and bore depths.
Answered by: JimY
Date published: 2017-08-14

are the prices listed on the website for just the heads, or the complete irons. If they are for complete irons, can I order them 1 degree up?

Asked by: ddp5868
The code MA0099 is for the clubheads only. We do offer Club Paks for these irons that include the heads, shaft and grips and we offer free assembly that would include bending them 1 degree upright. You can see the Club Paks for the TE Forged irons listed at this link. https://www.golfworks.com/search.asp?ss=ma0099
Answered by: JimY
Date published: 2017-07-19

Are these bendable for loft and lie, if i want to do it myself?

Asked by: Robj
Yes the TE Forged irons are adjustable for loft and lie up to 2 degrees.
Answered by: JimY
Date published: 2017-07-19

I want to buy maltby cavity back irons left handed. can you recommend

Asked by: Anant
We do not offer the TE Forged irons in a left hand model. Our STiOS (MA0273) is our left hand cavity back model and is a very forgiving design. https://www.golfworks.com/maltby-sti-os-iron-heads-lh/p/MA0273/ https://www.golfworks.com/search.asp?ss=ma0273
Answered by: JimY
Date published: 2017-07-17

Does this club head pair well with the Aldalite graphite A flex shaft?

Asked by: Michael1948
The TE Forged iron head is a Super Game Improvement, cavity back blade profile. Any shaft that fits your game should work well with this head. If you like a more traditional looking head with less offset than most Super Game Improvement head designs, there is no reason it would could not work well with the Aldalite A flex shaft.
Answered by: GW2002
Date published: 2017-07-16

TE heads sweetspot. If I were to draw a vertical line on the club face perpendicular to the grooves to mark the "h cog" sweetspot, what would be the location of that line-from toe and heel. DO all the TE heads have the same sweetspot location?

Asked by: wts
Jim, So by the center of the face I assume you mean the middle of the grove pattern, as looking down at address, the groove pattern is actually more to the heel side than toe side. Unless you are measuring to the far side of the hosel. Thanks
Answered by: wts
Date published: 2017-05-24
  • y_2017, m_9, d_18, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_85
  • loc_en_US, sid_MA0099, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks