Maltby Tour Grind MG Wedges

Maltby Tour Grind MG Wedges


Tour Grind MG Wedge - 52 Degree
$34.99
In Stock
Tour Grind MG Wedge - 56 Degree
$34.99
In Stock
Tour Grind MG Wedge - 60 Degree
$34.99
In Stock

Maltby Tour Grind MG Wedges

Maltby MG Tour Grind Wedges Views

The Maltby MG Tour Grind Wedges were designed for the player that demands creativity around the greens. The sole design of the MG Tour Grind Wedges features a narrow sole with an exaggerated toe and heel Tour Grind making them the most versatile wedges ever designed under the Maltby brand. Micro Grooves (MG) have been CNC milled into the face to consistently increase spin around the greens. The Diamonized Black Metal finish is a very thin chemically implanted coating that is twice as durable as traditional nickel chrome plating and 30 times more durable PVD coatings typically found on modern black wedges. The DMB finish will not “crack” or “peel” when being bent to custom specs yet is so strong it will actually extend the sharpness and overall shape of the precision milled MG grooves vs. any other wedge finish currently available. If you desire a wedge that allows for the ultimate in consistency and creativity, the Maltby MG Tour Grind wedges are the answer!

MG Tour Grind Wedge Product Editorial

  • Form Forged from 1030 Carbon Steel for a soft feel and easy adjustability.
  • Narrow sole width and relieved heel and toe Tour Grind for the ultimate is face angle manipulation.
  • “DBM” Diamonized Black Metal finish is a chemically implanted finish that is more wear resistant, corrosive resistant, and scratch resistant than any current carbon steel finish available.
  • “MG” groove technology (CNC milled) places more grooves on the face than traditional wedges, consistently increases ball spin on less than full shots.
  • Available in 52(8), 56(11) and 60(7) loft and bounce options.
  • Conforms to the rules of golf
  • Recommended ferrule – 70PI
  • Quick Ship Pak available
  • Product Code - MA0233

Maltby Tour Grind Wedge Clubhead Specifications

Maltby Tour Grind MG Wedges is rated 4.4 out of 5 by 36.
Rated 5 out of 5 by from Butta First of all. These are the most beautiful wedges I have ever seen (all manufacturers included). I paired 52, 56 and 60 degree wedges with rifle spinner shafts with sensicore inserts. The feel, even on full swing shots is unmatched by any OEM. At Carl's Golfland, I demoed a vokey sm4, Cleveland 588, and Mizuno MP R-12 along with my Maltby MG Tour. The Maltby performed just as well as the others, but had a better feel. Perhaps due to the sensicore inserts. The grind on these wedges allow the skilled player to perform an arsenal of shots around the green. Simply put, these wedges perform just as well as any major OEM at 1/3 of the price. Put all that together, BUTTA!
Date published: 2013-10-06
Rated 4 out of 5 by from Pretty good wedge at great price Although I have not had the ability to take this wedge to the course, I have had extensive practice sessions with it and can say without a doubt, the finish on this wedge is fantastic. I bought the 60-07 and love the versatility of the grind. I shafted it with the Rifle Spinner shaft and really like the soft feel on half-three quarter shots as well as fuller shots. Spin is very controllable and not over-excessive, which is great for a high spin player like myself. If the wedge performs as good on the course like it does on the short game areas, I will seriously consider the 52 or 56. I would, however, like to know whether the grooves are usga conforming or not, as I plan on playing tournaments with it next year
Date published: 2014-12-16
Rated 5 out of 5 by from Best Set of Wedges I Have Owned! I originally purchased the 56° wedge in order to evaluate performance and the durability of the finish. It didn't take long for me to order the 52° and 60° wedges to complete my set. These are easily the best performing wedges I have ever owned, and I've owned quite a few different sets from the most popular OEM's to components from other reputable manufacturers. Feel/Feedback is excellent and the grinds are perfect. I've had my wedges for several months now and the finish is extremely durable, hardly a scratch. Very attractive design as well. These wedges have instilled much more confidence in my short game, something that I've lacked in my overall game. I would most highly recommend these wedges.
Date published: 2016-06-20
Rated 5 out of 5 by from Great wedges for a great price! I bought these clubs about a month ago and couldn't be more impressed! I used the same set of Maltby irons for 12 years, but have always been a Cleveland wedge loyalist. I was in need of new wedges, and thought I'd give the Tour Grind MG a shot, and I couldn't be happier! Not only did they perform as well, or a little better, than my old Cleveland's, but they were a fraction of the cost! If you're on the fence, give them a shot, with the 30 day playability guarantee you have nothing to lose, but you need it, these are awesome.
Date published: 2015-06-01
Rated 3 out of 5 by from Custom work is not good I purchased a 56 and 60 degree wedge and paid for a loft adjustment so the 56 degree club was at 55. Lies were also adjusted 1 deg flat. When I received the clubs both seemed to give about the same distance. It bothered me enough to go to a local club fitter and have them checked. The 56 degree club was at 57 degrees and the 60 degree came in at 59 degrees. I complained to the company as the club fitter didn't work for free. Their response was to refund me $3.95. No apology. Just a short note "you will be credited". This is not good customer service.
Date published: 2017-09-12
Rated 5 out of 5 by from Great Wedge Probably have played close to 10 rounds with the 60 so far which is my wedge of choice under 90 or so yards. Very much exceeded my expectations. Used a True Temper DGS300 for the shaft - tipped to 8-iron flex. Basically this is the wedge flex used by most companies. Absolutely perfect balance. The grind is the best I've encountered so far. Can lay the blade totally flat, but never feel like it will excessively dig on full shots. Stopping power is great. Works good out of the sand as well. The finish is impeccable with no blemishes showing after quite a few shots. Still can't believe it only cost about $60 to build the club. I've been using Callaway X-Forged for the last 3 years or so and these are without a doubt much better. Are they as good as Vokey's? Not sure, but they meet all of my requirements. I can change the head out once a season and keep the shaft for only $35 and 5 minutes of time if the grooves get worn. Kudos to Maltby for the design.
Date published: 2013-08-15
Rated 5 out of 5 by from Tour Grind Wedge I puchased the 56 and 60 degree wedges with spinner shafts last year and have played about 30 rounds with them. These are great wedges! I have always played Cleveland wedges and thought I would give these a try after liking the TE forged irons. The look and feel are excellent and would highly recommend them to anyone.
Date published: 2014-03-13
Rated 5 out of 5 by from Butta First of all. These are the most beautiful wedges I have ever seen (all manufacturers included). I paired 52, 56 and 60 degree wedges with rifle spinner shafts with sensicore inserts. The feel, even on full swing shots is unmatched by any OEM. At Carl's Golfland, I demoed a vokey sm4, Cleveland 588, and Mizuno MP R-12 along with my Maltby MG Tour. The Maltby performed just as well as the others, but had a better feel. Perhaps due to the sensicore inserts. The grind on these wedges allow the skilled player to perform an arsenal of shots around the green. Simply put, these wedges perform just as well as any major OEM at 1/3 of the price. Put all that together, BUTTA!
Date published: 2013-10-06
  • y_2018, m_1, d_19, h_5
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_36
  • loc_en_US, sid_MA0233, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I know it’s been asked previously, but any chance of knowing when the 60* will be back?  Thanks in advance. 

Asked by: glfr4life
We are still showing right around the end of January for these to be here.
Answered by: JimY
Date published: 2018-01-10

Any idea when the 60 degree wedge will be in stock?

Asked by: RickyP8
We are showing the 60 degree wedge is due in next week. Week of December 18th.
Answered by: JimY
Date published: 2018-01-04

I'm looking for 54°12° bounce would prefer forge steel or tour grind

Asked by: shoelaces
We do not offer the MG Tour Grind wedge (MA0233) in a 54 degree model. We do not offer a 54 degree wedge with 12 degrees bounce. We do have our M-Series+ 9MA0257) Tour 54 degree wedge which is 54 degrees 10 degrees bounce. That would be the closest we have.
Answered by: JimY
Date published: 2017-12-05

My TM Supersteel PW w/Bubbleshaft is 45*. I'm lkg @ these, but what about the large gap from 45* to 52*? What would be better seems a 50*, 55*, & 60*, but you don't offer it. What should I do to keep the gaps consistent? U have a 50* in another wedge?

Asked by: Timothy
We offer a 50 degree wedge in the M-Series + Wedge. It is the Tour 50 (MA0257). Five degree increments in short irons is done by a number of companies these days. In our DBM Forged irons (MA0225) we have a 50 degree Gap Wedge and it is a very good 50 degree wedge.
Answered by: JimY
Date published: 2017-11-22

Maltby Tour Grind MG Wedges are described as being made of both 1025 and 1030 carbon steel...could you please clarify this matter for me

Asked by: sugar shane
They are 1030 Carbon Steel.
Answered by: JimY
Date published: 2017-10-25

compare this 56 wedge to Cleveland cbx 56 wedge

Asked by: Beg
I know the Cleveland CBX wedge is designed to be a more forgiving wedge and our MG Tour Grind is designed more for the skilled player to use on a verity of shots by opening the face etc. The Cleveland wedge is designed more for the less skilled player and would more compare with our M-Series + wedges MA0257 in the Mid Grind.
Answered by: JimY
Date published: 2017-10-17

Will you ever come out with a set of Wedges that can be bent more than 1*. I love these wedges but they do not fit my set and I cant bend the gap and sandwedge enough to fit. Please come out with a set than can be bent 2-3* so we can make them fit.

Asked by: smmaddalena
I will pass along your request. I know we are working on some new wedges but not sure just what the final product will be yet. The black finish is what creates the bending problem with these wedges. It is a hard finish and it penetrates the material making it hard and brittle. It is durable but not malleable.
Answered by: JimY
Date published: 2017-12-25

Would love to see these wedges available in a 46* or 48* as well as a 64*. Primarily the 46* to swap out for the wedge in my normal set. Anh chance of a pak with spinner x shaft?

Asked by: ZayneVos
I will certainly pass along the request for the additional lofts. You would have to call Customer Service at 1-800-848-8358 to see if they can do a Club Pak with the Spinner Wedge + shaft.
Answered by: JimY
Date published: 2017-07-31
  • y_2018, m_1, d_19, h_5CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.6
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_57
  • loc_en_US, sid_MA0233, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks