Mitsubishi Rayon Bassara E Series Wood Shafts

Mitsubishi Rayon Bassara E Series Wood Shafts


45 S Flex - 46", .335" tip (49gm) 4B2S -
$174.99
Backordered
55 L Flex - 46", .335" tip (57gm) 2D2S -
$174.99
In Stock
Pureing 
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Mitsubishi Rayon Bassara E Series Wood Shafts

Based on the original F-Series bend profile, the E-Series utilizes the latest of our premium lightweight materials and is especially designed to perform well with today’s larger and lower-spinning head designs. The new E-Series features a firmer mid and butt-section to increase stability during energy transfer, while offering a slightly more responsive tip-section to deliver maximum feel.

Trimming Instructions

Mitsubishi Rayon Bassara E Series Shaft Specifications

Mitsubishi Rayon Bassara E Series Wood Shafts is rated 5.0 out of 5 by 1.
Rated 5 out of 5 by from Replacement I bought this shaft to replace one that I had broken on my Cleveland Black Big Dog. I bought the entire Black set (SW thru Big Dog) with the same shaft specifications, so the replacement choice was pretty much a given - and a good choice. I really like these shafts.
Date published: 2016-12-02
  • y_2017, m_6, d_17, h_13
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_1
  • loc_en_US, sid_MR0047, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What is the torque and kickpoint on the Bassara E 45 flex-lite shaft on the cleveland 3 wood and 5 wood?

Asked by: Kid
The Bassare E45 shaft was made exclusively for Cleveland and I do not have the exact specifications for this shaft. It would be a low kick point designed for produce a high ball flight and it would be a high torque shaft, likely over 6 degrees. We stocked the Bassara E Next Gen 42 (MR0057) which in the R flex had 6.7 degrees torque.
Answered by: JimY
Date published: 2017-03-27

What is trim code for mitribushi bassara e series hybrid iron shafts

Asked by: Bill
Here is the link from Mitsubishi's web site for the Bassara E Series Hybrid Iron shafts. Scroll down towards the bottom of the page and you will see the Tip Trimming Information. http://www.mrc-golf.com/products/e-series-hybridirons-0
Answered by: JimY
Date published: 2017-03-09

What is weight, length, torque of E45 regular wood shaft?

Asked by: Sammy
Scroll down the page at this link to the specifications box and you can read all the specifications for this shaft. http://www.golfworks.com/kbs-610-tapered-tip-wedge-shaft/p/FS0040/
Answered by: JimY
Date published: 2016-08-18

what is the difference between series 45 and 55?

Asked by: Mikie
The 45 and 55 indicate the weights. The MR0047 Bassera E Series wood shafts are being discontinued so if you see it listed as backorder it will no longer be available. You can see all the specifications for these shafts by scrolling down the page at this link to the specification box. http://www.golfworks.com/mitsubishi-rayon-bassara-e-series-wood-shafts/p/MR0047/
Answered by: JimY
Date published: 2016-05-23

Is the tip trimimg 1 inch for a 3 wood on the Bassara E 55 regular flex?

Asked by: monton
The recommended tip trimming for a 3 wood with the Bassara E 55 is 1/2" on the R flex. You would follow trim code W8 at this link. http://www.golfworks.com/images/art/shaft_trim_inst.pdf
Answered by: JimY
Date published: 2016-05-16

Can the bassara e-series 42, L (43 grams) be used  with a 910 D2 Titleist head?

Asked by: Joturo
Yes the Bassara e-series 42 L can be used with the 910 D2. depending on the skill of your repair technician they may be able to save the adaptor. If they can't you may need to get another or just the ferrule.
Answered by: Brent Dill
Date published: 2017-06-02

Torque of the Bassara E 45x5ct lite driver shaft

Asked by: Hilo boy
The torque is 6.5 degrees. You can read the shaft specifications by scrolling down to the bottom of the page at this link. http://www.golfworks.com/product.asp?pn=MR0047
Answered by: JimY
Date published: 2016-01-04

What is the butt diameter for the Bassara E55 x5ct shaft (Adams Tight Lies)?  Need to know if .600" grip will fit--if not, what size grip?.

Asked by: MikeR
If this is a Bassara shaft that was made specifically for Adams we do not know the butt diameter. An educated guess tells me it is .600" or very close. We stock the Bassara E52 Next Gen wood shaft and the R flex has a butt diameter of .604" and the S flex .606". So I feel comfortable saying your shaft should be close to .600".
Answered by: JimY
Date published: 2015-10-23
  • y_2017, m_6, d_17, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_11
  • loc_en_US, sid_MR0047, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks