Mitsubishi Rayon Kuro Kage Silver Wood Shafts

Mitsubishi Rayon Kuro Kage Silver Wood Shafts

60 R Flex - 46", .335" tip (64gm) 3B2M -
In Stock
60 S Flex - 46", .335" tip (66gm) 4B2M -
In Stock
60 X Flex - 46", .335" tip (68gm) 4B2M -
In Stock
70 S Flex - 46", .335" tip (75gm) 4B1M -
In Stock
70 X Flex - 46", .335" tip (76gm) 5C1M -
In Stock
1-3 $19.50
4+ $17.50
Tip & Butt Trimming
Tip Prepping

Mitsubishi Rayon Kuro Kage Silver Wood Shafts

KURO KAGE™ Silver Wood Series will feature the same High Density Prepreg as the original KURO KAGE™ Black profile, but in a profile that has a stiffer tip and mid section, and a softer butt section. The result is a series of shafts that will deliver extreme stability and lower spin than the original KURO KAGE™ Black profile.

Trimming Instructions

Mitsubishi Rayon Kuro Kage Shaft Specifications

Mitsubishi Rayon Kuro Kage Silver Wood Shafts is rated 5.0 out of 5 by 6.
Rated 5 out of 5 by from Very impressed, especially for mid priced shaft MR's top of the line made in japan shafts are always excellent and do what they say they will. I was a bit leary about buying one of their mid priced, not made in japan shafts but the price was too good. Put the 70+gm X-stiff in Bridgestone j40 430 driver head. The club is a sniper rifle, shaft is solid as a rock but still retains some feel which is impressive. I can take a full rip and not worry about the shaft twisting. Very impressed I hear the new tini one is even better.
Date published: 2015-10-20
Rated 5 out of 5 by from Very stable performance. Have been playing this in my driver (M1) for about a month. Improved trajectory and dispersion pattern. Does not improve my mechanics on "off days" however. Just confirms I suck that day.
Date published: 2016-10-27
Rated 5 out of 5 by from excellant shaft feels great,does what the description says,fast shipping excellent price
Date published: 2015-04-24
Rated 5 out of 5 by from Great shaft I put the shaft on my 14 yr old daughters Taylormade Aero burner and she loves it. It added more distance compare to her cobra driver and more roll. She hits the ball high and we had to tee the ball lower .
Date published: 2015-09-06
Rated 5 out of 5 by from Great shaft and super prompt on delivery I received the shaft 2 weeks ago and it is working great. Would recommend Golf Works to meet your golf needs.
Date published: 2016-11-14
Rated 5 out of 5 by from Great shaft This shaft did pretty well when I had the wrong weight/flex. Changed after a fitting, and now it's great!
Date published: 2017-05-19
  • y_2017, m_11, d_22, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_6
  • loc_en_US, sid_MR0036, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

I need the shaft to be able to fit onto my TaylorMade R15. How would I do that?

Asked by: Nick
You need to also purchase the Taylor Made shaft adapter for the R15 (TM0023) to be installed on the shaft. Then you will be able to install this shaft into the R15 driver. We can install the adapter on this shaft for you and set the shafts up to your given specifications. If you call Customer Service at 1-800-848-8358 they can help you with your order and get all your specifications.
Answered by: JimY
Date published: 2017-11-16

I have a Ping Anser. Swing speed is around 102 at 55 years of age. This is a low spinning head to begin with. Would the stiff vs x-stiff in this shaft have a significant change in the spin? From 46 to 45 inches make a stiff into a stiff + (but not quite x

Asked by: Gary J
The shaft flex change from S to X would not have much if any change on spin. If you are asking about shortening a driver from 46" to 45" It would make the shaft play approximately a half a flex stiffer unless you added back the 6 swingweights that the club gets lighter when shortened from 46" to 45". Then the shaft would remain it's original flex.
Answered by: JimY
Date published: 2017-11-06

Can this be put into a 3 wood?

Asked by: Anthony
Yes the Kuro Kage Silver wood shaft can be installed into a 3 wood. You would follow the recommended trimming instructions for a 3 wood and it will play to it flex for a 3 wood.
Answered by: JimY
Date published: 2017-10-13

I have a set of Ping G30. Driver, 3 & 5 wood, 4 Hybrid, 5-9 irons, 46 50 54 deg wedges.  need a stiff steel shaft.  Swing speed in the 90's.  what do you recommend and cost?

Asked by: Findog
If you are wanting steel shafts for all of these clubs there are only 2 steel wood shafts available We have the True Temper Dynamic Gold (UDGW) and the True Temper Command (TT202101). You could use True Temper Dynamic Gold shafts in all of these clubs. UDGW for the driver, 3 & 5 wood. DGI .355" taper tip iron shafts for the 4 hybrid, 5-9 irons and all the wedges. You would use the S300 flex in all of these shafts. You will see the costs of these shafts at these links.
Answered by: JimY
Date published: 2017-09-05

Can I use this shaft for a fairway wood 16 deg. ?

Asked by: winesnob
Yes, the Kuro Kage Silver can be used for fairway woods. Trimming instructions for a #3 wood would be trim 1/2" from the tip before installation. For a 5 wood, trim 1" from the tip before installation. After installation, trim to final playing length from the butt end.
Answered by: GW2002
Date published: 2017-06-02

I want Kurokage graphite 50 regular shaft with high kick point

Asked by: Bob
You would need the MR0074 Kuro Kage Silver TiNi Dual Core shaft.
Answered by: JimY
Date published: 2017-05-22

I wanted to reshaft my old Ping eye 2 irons. I was hitting a 55 gram regular shaft Kurokage at a demo days and liked it. I know that the ping has a tapered hosel. Can I get these shafts 4 thru wedge and what would the cost be?

Asked by: TomH
The MR0036 is for drivers and fairway woods and will not fit the Ping irons. We do not stock a 55 gram Kuro Kage iron shaft and do not stock a Kuro Kage shaft in a.355" taper tip that would fit the Ping Eye 2 irons.
Answered by: JimY
Date published: 2017-05-22

It is possible to deliver this shaft for Brasil with the adaptor for the M2 Taylor Made driver. And how much it will cost?

Asked by: Rodrigo68
Yes we can deliver to Brasil. For all your shipping information you will need to contact our International Trade Accounts Manager Donn Ours at and she will be glad to help you.
Answered by: JimY
Date published: 2017-05-08
  • y_2017, m_11, d_22, h_2CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_34
  • loc_en_US, sid_MR0036, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks