Odyssey Double Bend Replacement Putter Shafts

Odyssey Double Bend Replacement Putter Shafts


Odyssey - 37in Double Bend - 370 tip (110g)
$8.99
In Stock
Odyssey - 50in Double Bend - 370 tip (171g)
$9.99
In Stock
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Odyssey Double Bend Replacement Putter Shafts

Odyssey Double Bend Replacement steel putter shafts for putters 37" or 50" in length.

Features:
  • .370" tip diameter

Trimming Instructions

Odyssey Replacement Golf Putter Shaft

Odyssey Double Bend Replacement Putter Shafts is rated 5.0 out of 5 by 5.
Rated 5 out of 5 by from Odyssey Two Ball Shaft Needed to re-shaft an Odyssey White Hot Two Ball putter. This is due to my arms being to long for my height. That required a shorter shaft length. Just cutting the original shaft put the grip to far into the taper of the shaft. This solved my problem. They shipped the shaft fast and in a strong box. Would recommend.
Date published: 2016-09-28
Rated 5 out of 5 by from Golfworks was very helpful. Installing the Odyssey double bend shaft is no easy task. Golfworks was very helpful and answered my questions and explained how to install the shaft at the correct angle. Product arrived within a couple of days. Great company with a great staff.
Date published: 2017-03-17
Rated 5 out of 5 by from Putter shaft. Very happy with the product and it serves well in my tree ball Putter head and 5.0 grip
Date published: 2017-02-09
Rated 5 out of 5 by from Customer pleased Excellent quality and alignment was easy .. Customer was pleased
Date published: 2017-10-10
Rated 5 out of 5 by from Original Specs Replacement shaft matches the original bends in my 2-ball putter.
Date published: 2016-01-12
  • y_2017, m_10, d_21, h_22
  • bvseo_bulk, prod_bvrr, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_5
  • loc_en_US, sid_TT204102, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

What is the correct shaft for my Taylor Made Rossa Monza Spider Balero???

Asked by: Marc
I cannot tell for sure by looking at pictures if the post that the shaft installs over is at 90 degrees. If it is 90 degrees then you would need the TT1002P. If the post slants towards the face of the putter then you would actually need the TT204102 Odyssey Replacement putter shaft.
Answered by: JimY
Date published: 2017-10-05

I need a shaft for an Odyssey White Hot XG #5 putter head. Can you recomend the correct shaft for me?

Asked by: Dave
You would need the Odyssey Replacement shaft TT204102 double bend putter shaft for the White Hot XG #5 putter. It is the only shaft we stock that will fit this putter.
Answered by: JimY
Date published: 2017-09-25

I ordered the TT204102 shaft for a wood mallet style putter head I am making. Do you know what the proper bore angle is for this shaft? The putter head is being modeled after an Odyssey White Hot Rossie style putter. Thanks

Asked by: Chris
The Rosie putters are not a 90 degree hosel bore but we do not have a measurement of the angle. They angle the shaft from the face of the putter at the top of the bore towards the back of the putter at the bottom of the bore as well as a little bit of lie angle.
Answered by: JimY
Date published: 2017-09-11

is this for f7 odyssey putter

Asked by: geoge
Yes the TT204102 is the replacement shaft for the Odyssey F7 putter.
Answered by: JimY
Date published: 2017-09-06

Do you have a left hand oddessy double bend replacement shaft?

Asked by: Jon
No we do not stock the Odyssey Replacement double bend shaft in a left hand model. We can special order one for you. You will need to call Customer Service at 1-800-848-8358 and they can help you with the special order.
Answered by: JimY
Date published: 2017-08-24

I have a Taylor Made Spider limited - itsy bitsy. I need a new shaft. What shaft # would be required to be ordered as a replacement. How difficult is it to replace?  I assume that heat will remove the epoxy. 

Asked by: Dande1
For the Taylor Made Spider Limited Itsy Bitsy putter you will actually use the Odyssey Replacement putter shaft (TT204102). Here is a link to instructions from our web site for installing double bend putter shafts. With the Itsy Bitsy Spider putter you would not sand the tip of the shaft but you will lightly sand the post that the shaft installs over the top of. It is important to get these shaft aligned correctly. The pictures on the bottom of page 2 of the instructions are good visuals for alignment. https://www.golfworks.com/images/art/GWDB.pdf
Answered by: JimY
Date published: 2017-08-14

Where do I get a replacement black ferrule/band that are used on Odyssey mallets? I want to reshaft my White Hot XG #7 that I previously cut down for my daughter. She grew out of the 28 inch length and need a 32 inch now.

Asked by: nobwas
I am not aware of anyone who has a replacement ferrule for the Odyssey putters. I am not remembering if it is a collared ferrule but if it is possibly the BB9003 Callaway Ferrule might work. If it is not a collared ferrule the O-ring 68WIR would be the only option we would have.
Answered by: JimY
Date published: 2017-08-08

Will the 37" shaft fit an Odyssey Works Versa #7? One is available for sale for a good price with a broken shaft. Thanks in advance.

Asked by: Tateg
Yes, the TT204102 Odyssey Replacement shaft does fit the Works Versa #7 putter.
Answered by: JimY
Date published: 2017-08-03
  • y_2017, m_10, d_20, h_22CST
  • bvseo_bulk, prod_bvqa, vn_bulk_2.0.3
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_111
  • loc_en_US, sid_TT204102, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks