Odyssey Double Bend Replacement Putter Shafts

Odyssey Double Bend Replacement Putter Shafts


Odyssey - 37in Double Bend - 370 tip (110g)
$8.99
In Stock
Odyssey - 50in Double Bend - 370 tip (171g)
$9.99
In Stock
Tip & Butt Trimming
$4.95
Tip Prepping
$2.95

Odyssey Double Bend Replacement Putter Shafts

Odyssey Double Bend Replacement steel putter shafts for putters 37" or 50" in length.

Features:
  • .370" tip diameter

Trimming Instructions

Odyssey Replacement Golf Putter Shaft

Odyssey Double Bend Replacement Putter Shafts is rated 5.0 out of 5 by 4.
Rated 5 out of 5 by from Odyssey Two Ball Shaft Needed to re-shaft an Odyssey White Hot Two Ball putter. This is due to my arms being to long for my height. That required a shorter shaft length. Just cutting the original shaft put the grip to far into the taper of the shaft. This solved my problem. They shipped the shaft fast and in a strong box. Would recommend.
Date published: 2016-09-28
Rated 5 out of 5 by from Golfworks was very helpful. Installing the Odyssey double bend shaft is no easy task. Golfworks was very helpful and answered my questions and explained how to install the shaft at the correct angle. Product arrived within a couple of days. Great company with a great staff.
Date published: 2017-03-17
Rated 5 out of 5 by from Putter shaft. Very happy with the product and it serves well in my tree ball Putter head and 5.0 grip
Date published: 2017-02-09
Rated 5 out of 5 by from Original Specs Replacement shaft matches the original bends in my 2-ball putter.
Date published: 2016-01-12
  • y_2017, m_6, d_16, h_21
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_4
  • loc_en_US, sid_TT204102, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

will the 37 inch fit a DFX 2 ball putter

Asked by: referee7
Yes the TT204102 37" shaft will fit the DFX 2 ball putter.
Answered by: JimY
Date published: 2017-06-05

Im looking for a 50" double bend for a metal x dart that is left handed could you help me find what I would need to make my metal x dart a 48" length left handed

Asked by: Hadley
We do not have a 50" double bend replacement shaft for the Odyssey Metal X Dart left hand putter. Odyssey putters use a special double bend shaft that is not a 90 degree bore or over post. We do not have a long putter that we would be able to bend for this putter. You will likely have to check with Odyssey to see if they can help you with this putter.
Answered by: JimY
Date published: 2017-06-05

Hi Could you please advise me whether this shaft will be able produce a putter at 80° to the ground when fitted? Many thanks

Asked by: simonjhere
When installed on the putter head the finished putter length will be a little longer then 50" because the shaft tip will be up from the ground. You will need to cut from the grip end to the 50" finished length. The lie will be closer to 79 degrees. Because the Rule of Golf say a lie angle cannot be more upright then 80 degrees most manufactures stay in the 79 degree range to allow for any tolerances that might put them more upright then 80 degrees.
Answered by: JimY
Date published: 2017-05-31

Hi. Can you please confirm that when fitted it will create a 50" putter which can be set at 80° to the ground?

Asked by: simonjhere
When installed on the putter head the finished putter length will be a little longer then 50" because the shaft tip will be up from the ground. You will need to cut from the grip end to the 50" finished length. The lie will be closer to 79 degrees. Because the Rule of Golf say a lie angle cannot be more upright then 80 degrees most manufactures stay in the 79 degree range to allow for any tolerances that might put them more upright then 80 degrees.
Answered by: JimY
Date published: 2017-05-31

Was wondering if this would be the best shaft for the odyssey triball putter head? Looking to get a 38" shaft replacement. 

Asked by: Chase
The TT204102 Odyssey Replacement shaft will fit the Tri-Ball but at 37" raw length might not quite get you to a 38" finished length. It should be close. We also have the 50" shaft for the long and belly putter models that could be used and cut down to 38".
Answered by: JimY
Date published: 2017-05-16

Guys, I'm struggling to find a replacement Putter Shaft for a TaylorMade Spider OS Putter. It's a double-bend style but the 3 options i've tried so far are not right and TM have been less than helpful!

Asked by: Russ
In looking at some pictures it looks like this putter does not have a 90 degree post. If that is the case we likely do not have a stock shaft that will fit this putter. The Odyssey double bend shaft is for the Odyssey putters. The post or hosel bore on the Odyssey putters slant towards the face and it not a 90 degree bore. You may have to send it back to Taylor Made for reshafting.
Answered by: JimY
Date published: 2017-03-29

I have an old Rossie 2 dual force mallet head putter which is being renovated, but I need an exact match shaft to replace the old one. Can you please recommend?

Asked by: NickPlop
The TT204102 Odyssey Replacement shaft is the same shaft that was used in the Rossie 2 Dual Force mallet putter.
Answered by: JimY
Date published: 2017-03-21

Do you have a replacement shaft for an Edel E-3 Torque putter or get something close. 37"  Thanks

Asked by: Chuckie
We do not have a replacement shaft for the Edel E-3 Torque putter. We could do a custom bend shaft for this putter but would require you to send in the putter head so that we make sure to get the bend set up correctly. https://www.golfworks.com/images/art/RepairForm.pdf You may also want to contact Edel to see what options they may have for you. https://edelgolf.com/collections/torque-balanced-putters
Answered by: JimY
Date published: 2017-03-07
  • y_2017, m_6, d_17, h_24CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_99
  • loc_en_US, sid_TT204102, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks