Ping G30 Series Shaft Adaptor

Ping G30 Series Shaft Adaptor


Ping G Series Shaft Adaptor - RH .335"
$27.99
In Stock
Ping G Series Shaft Adaptor - LH .335"
$27.99
In Stock

Ping G30 Series Shaft Adaptor

The Authentic Ping shaft adaptor sleeve adds one more degree of adjustability over the previous Ping adaptors and allows for multiple shafts to be used in the Ping G, Ping G30 ,Ping LS Tech, Ping SF Tech and Rhapsody drivers and fairway woods at a fraction of the cost of re-shafting. Available in RH, .335" and LH,.335". The Ping G30 driver and fairway adaptor is not compatible with previous Ping models featuring adjustable hosels

Ping G30 Shaft Adaptor is rated 3.4 out of 5 by 9.
Rated 3 out of 5 by from G30 shaft adapter I bought two of these with the idea of putting them on a couple of shafts so I would have a couple of different options to try. First of all these are different then the adapter that is on the G30. They come with a fixed rubber ferrule so removing them without ruining the rubber ferrule is nearly impossible. The adapter on my G30 looked to be one piece. The first adapter I tried looked just the the second but after a few swings I noticed the head and grip were no longer aligned. I grabbed the head and grip and twisted and noticed the head would move about a 1/4" in both directions. The shaft was secure in the adapter but the adapter would turn inside the head. The second adapter held up just fine.
Date published: 2016-01-17
Rated 5 out of 5 by from Works on new G driver Great to have these available for Ping's newest driver. Pay attention to the tiny conical plugs Ping includes to plug up the hole in the tip of the shaft so that epoxy does not get into the shaft. I can see this is a good idea but fully plugging the tip can make the adaptor want to slip off the shaft due to the pressure of the epoxy between the shaft tip and the end of the adaptor. It is very hard to get the adaptor to stay on the shaft. The pressure of the epoxy drives the adaptor off the shaft. You might want to leave a little of the tip open or unplugged so that the adaptor is not driven off the shaft.
Date published: 2016-03-25
Rated 1 out of 5 by from Have a club repair guy re-glue first!!! The adapter is in two pieces. For a right handed golfer when you hit the ball it is threaded in an orientation that loosened the club head/outer sleeve. There was glue originally in between the sleeves but it failed and the threading orientation didn't help. My club guy used a couple different things to create more contact in between the sleeves and re-glued them and it works fine now. And I bought four adapters for different shafts and all four of these did this. Doesn't seem like an anomaly.
Date published: 2016-10-02
Rated 5 out of 5 by from Fits My G-30 Griver well. I purchased the ping G-30 shaft adaptor so I could change the shaft in my G-30 Ping Driver from the to soft Ping reg. flex shaft to a after market stiff one. Thanks to Golfworks I got it with in 5 days of placeing my order. It fit the Ping club head like a dream. This saved me a golf season of waiting for Golfsmith to get with the program. I was ready to trade in my Ping G30 for a different Driver but the stiff flex shaft change is keeping me in the fairway at least 65% of the time now. Great product
Date published: 2015-06-01
Rated 1 out of 5 by from Ping G30 or G adapter I am on my second adapter as both have broken loose at the metal adapter while the plastic ferrule is glues solid. As written by Clubmonkey above “The effective area that the shaft and epoxy meet is less and these are breaking loose”. My third adapter is coming off eBay at half the price, and hopefully less headaches.
Date published: 2016-08-05
Rated 1 out of 5 by from New adapters with plastic ferrule...yuk! The first g30 adapters were all metal. This new version with a plastic ferrule are not good. The effective area that the shaft and epoxy meet is less and these are breaking loose if you are not careful. The old all metal versions were far superior and didn't need a ferrule if you reused it. Not a good change!
Date published: 2016-01-17
Rated 5 out of 5 by from Good product....but Adapter works great! But, after trial don't use the rubber tip it creates an air pocket which makes it extremely hard to put the adapter on correctly. Also, put epoxy on the shaft! Ping's instruction booklet which is included- isn't that good
Date published: 2016-03-22
Rated 5 out of 5 by from Great Features I ordered the Ping G30 adapter to change shafts in series SF Tech driver, it was very easy to install and works great!
Date published: 2016-03-25
  • y_2017, m_6, d_21, h_2
  • bvseo_bulk, prod_bvrr, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_US, sid_PGC002, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_golfworks

Can I put an Aldila nv65 Shaft on a G30 driver if I use one of these adapters?

Asked by: Gilchgolfer
Yes you could install the NV65 shaft using the Ping G30 Series Shaft Adaptor.
Answered by: JimY
Date published: 2017-06-05

Hi If I buy a steelfiber shaft are you able to attach the adaptor ?? I'm worried I'll do it wrong

Asked by: Michael
Yes we can install the shaft adaptor for you. You will need to tell us the setting that you want the shaft aligned to in the adaptor.
Answered by: JimY
Date published: 2017-04-19

What is the shaft depth for this adaptor?

Asked by: Gary
The bore depth for this adaptor is 1 1/4".
Answered by: JimY
Date published: 2017-03-27

are the shaft adapters the same for fairway woods and drivers ?

Asked by: dave
The PGC002 adaptors are designed for and work in both the drivers and the fairway woods.
Answered by: GW2002
Date published: 2017-03-21

Is the adapter the same for left handers or right handers?

Asked by: don
The markings regarding the adjustments will be opposite on the left hand adaptor if it is installed on a right handed head.
Answered by: JimY
Date published: 2017-02-24

When do think you will have this in stock? Could you put on shaft if I ordered them from you

Asked by: Tommyb51
Right now we are showing that they are due in at the end of February.
Answered by: JimY
Date published: 2017-02-10

I would like to know if this adapter (Ping G30 Shaft Adaptor) works with a shaft "ALTA 55 Graphite - Stiff flex" for a PING G LST Driver? If yes, do I need to order something additional to install it on the ALTA 55 shaft?

Asked by: Edgar Sanchez
Yes the G30 shaft adaptor will fit the Alta 55 Ping shaft and fit into the Ping G LST driver. The shaft adaptor is all you need for this installation.
Answered by: JimY
Date published: 2017-01-17

Replaced regular flex shaft in my G driver to a stiff shaft. Tips were already installed. What would cause the stiff shaft to loosen after hit? Cant see any cracks. Yes I tighten till it clicks.

Asked by: David
If the shaft adaptor is coming loose I am not sure what would be causing it to come loose unless something is not fitting correctly. When you tighten it and it clicks does everything seem tight. We had a case with one of our own driver models where the screw was a little to long and it would not tighten correctly. That is the only thing I can think of that might cause this to happen. I do know they occasionally come loose, I have seen this with the tour players.
Answered by: JimY
Date published: 2017-03-05
  • y_2017, m_6, d_21, h_8CST
  • bvseo_bulk, prod_bvqa, vn_bulk_1.0.0-hotfix-1
  • cp_1, bvpage1
  • co_hasquestionsanswers, tq_52
  • loc_en_US, sid_PGC002, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
  • clientName_golfworks